There Are 3 Types Of Remote Key Fobs That Are Battery Operated:
Key fob:
Ford Edge remote key fob battery replacement information
Key fob:
Ford Edge remote key fob battery replacement information
Things to remember when your Ford Edge key fob battery is dead:
First, even if the key fobs battery is dead, you still can unlock and start your Edge. You can use the emergency key provided with the key fob to unlock the doors as shown below:
Ford key fob and emergency key
The key fob on the inside Battery, chip and emergency key
How to start Ford Edge with a dead key fob?
You can start your Ford Edge by pushing the Start button with your key fob. The cars computer recognizes the chip inside the key fob and authorizes the process.
Push the start button with your dead key fob to start the car like in this picture
This way, you will be able to start your vehicle EVEN if the key fob battery is dead.
Ford Edge Key Fob Battery Information:
Ford Edge key fobs are battery operated. Every two years or so, or when the battery is low, you may need to change the key fob battery. Here is all the information you need.
The type of battery you need is a CR-2450 for 164-R8150, a CR-2032 for 164-R8091/92 and a CR-2025 for 164-R8109. The average price for these batteries is about $5.
You can order CR-2450 online here, CR-2032 here and CR-2025 here.
Also, you can find it at Home Depot, Walmart, AutoZone, etc.
Here is some general information about the Ford Edge key fob battery:
Type of battery: CR-2450 lithium
CR-2450 key fob battery replacement
How Do I Know If My Ford Key Fob Needs To Be Reset
If youve replaced the battery in your Ford key fob and its still not working, youll need to reset it to the vehicle.
- This can be done by following these steps:
- Start with the key out of the ignition and all doors closed
- Insert and remove the key from the ignition six times within ten seconds
- Leave the key in the ignition and turn it to the on position, press and release the lock button on the key fob
- Turn the key to the off position and remove it from the ignition, and the doors should now lock and then unlock, indicating that the reset is complete.
How Do I Get A Replacement Key
If your coded keys are lost or stolen and you do not have an extra one, new coded keys may be obtained from your Ford Dealer. For security reasons, you must visit the Ford Dealer in person and provide proof of identification and vehicle ownership:
- Personal Identification such as a valid Driver’s License, state-issued picture I.D, or passport.
- Vehicle documentation with the Vehicle Identification Number and the name of the person seeking the key codes. Examples could include current Vehicle Registration, current Certificate of Automobile Insurance, Vehicle Title, or Bill of Sale.
This may require having your vehicle towed to your Ford Dealer.
Notes:
- Key codes for vehicles older than 10 model years are not available.
- If your Ford Dealer is unable to duplicate your key, they may be able to recommend a reputable locksmith in your area to perform this service.
- The cost of a new key varies. For additional information, contact your Ford Dealer.
Also Check: How Long Does Gopro 9 Battery Last
One Thought On 2017 Ford Edge Keyless Entry Remote Fob Programming Instructions
Can you program an edg e 2017 with just one working key fob? The other one was lost.
Great products and wonderful service. I love being able to offer my customers factory original products at great prices! Thank you NorthCoast Keyless for all you do! -BRET, ABLE LOCKSMITH
Works great! Awesome price vs dealership! Fast shipment easy to program! Will order for future replacements! -BEA G.
I recently ordered two key fobs for my 2003 Honda Pilot after the last working key fob I had broke. I had first called the dealer and they wanted over $100 for the fob alone and were going to charge me $75 to program it. The replacement fobs I ordered from you were $19.95 a piece and I was able to program them myself quickly and easily using the simple instructions you provided. Thank you for saving me literally hundreds of dollars! Great customer service and a great money-saving alternative to ridiculous dealer markups! Thanks again! -KATHRYN R.
I have to be honest, this was my first online purchase! I am very pleased with my purchases. The remotes were programmed yesterday and work perfectly. I truly appreciate your rapid response and great customer service. Thanks again, NorthCoast! -SHEILA M.
Ford Key Fob Remote Battery Replacement Guide
Learn how to change the battery on Fords key fob remotes. Scroll down until you see the video on your particular Ford key fob.
Take a look at these videos, and if you prefer step-by-step instructions, those are provided for you below.
Watch how to change the battery on the most popular Ford key.
The following video shows how to replace the battery on Ford smart key.
Lastly, this video shows how to replace the battery on the Ford Intelligent Keyless key.
To change the battery in this Ford key, you will need one or two CR2025 batteries and a flathead screwdriver. This key fob has been used in Ford Fusion, Mustang, and F-150 from 2013 to 2018.
Don’t Miss: Best Battery Brands For Cars
How To Save Money On Car Insurance
âJerry is the future of car insurance! I downloaded the app, entered the information, picked my insurance rate, and paid my fee. I even switched insurance providers easily! Jerry saved me $182/month so quickly!â âPaulina F.
Thousands of customers saved on average $887/year on their car insurance with Jerry
How Do I Reset My Ford Key Fob
In case your Ford key fob isnt working after youve changed the battery, youll need to reset it to the vehicle. This can be done by following these steps:
When youve followed these steps and your Ford key fob still isnt working, its possible that there is a problem with the key fob itself. You may need to take it to a dealer or locksmith to have it programmed or replaced.
Recommended Reading: Inverter Battery Backup For Existing Sump Pump
Your Guide To The Ford Fusion Key Fob Battery
Learn how to choose and install a new Ford Fusion key fob battery to keep yours in perfect working order.
Your Ford Fusion key fob battery, which is also called the Ford intelligent access key fob battery, is likely to stop working properly after a couple of years of daily use. To keep your vehicle secure and your vehicular usage convenient, you should replace this handy auto accessory promptly and effectively. Learning about how to do so can help you to enjoy your key fob features. Keep reading to learn about this battery, how to choose a new one, how to install it, and where to make your purchase.
Panasonic Panasonic CR2025-10 CR2025 3V Lithium Coin Battery
Panasonic Panasonic CR2025-10 CR2025 3V Lithium Coin Battery
LiCB LiCB CR2032 3V Lithium Battery
LiCB LiCB CR2032 3V Lithium Battery
How Much Does It Cost To Replace A Ford Key Fob
If you need to replace your Ford key fob, the cost will depend on a few factors. The most important factor is whether or not you have the dealer do it or if you do it yourself.
In case you take your Ford key fob to the dealer to have it replaced, the cost will be anywhere from $75-$200 depending on the dealership and the type of key fob that you have.
But when you decide to replace your Ford key fob yourself, you can expect to pay anywhere from $20-$60 for a new key fob depending on where you purchase it from.
Recommended Reading: Cost To Replace Nissan Leaf Battery
What Is A Ford Fusion Key Fob Battery
A Ford Fusion key fob battery powers the key fob and provides owners of the Ford Fusion sedan with remote access to the engine start and the keyless entry systems. This auto accessory is suitable for the 2013-2020 second-generation Ford Fusion sedans. Key benefits and features of this product include:
- Enables keyless entry to the Ford Fusion sedan.
- Allows engine startup to be controlled remotely.
- Improves vehicle security, as the key fob cannot be easily copied or attacked.
- Helps you locate your vehicle via the Panic button.
- Avoids traditional key-based issues, such as jammed keys.
Shop Around To Find The Right Replacement
As Ford Fusion key fobs can vary based on battery requirements, check whether your device uses one or two units. Next, check your car’s manual or the current key fob battery for the exact part you need to purchase. You’re likely to need CR2025 or CR2032 3-volt batteries. These units are available on Amazon. You can also buy them from supermarkets or automobile dealerships. You can choose from different brands, such as Amazon, Energizer, Duracell, and Panasonic. You can buy single batteries or save money by opting for either CR2025 or CR2032 batteries in bulk.
You May Like: Lithium Ion Batteries For Solar
Evaluate Your Ford Fusion Key Fob Battery
Look out for warning signs that indicate a weak battery in your key fob, such as:
- You have to move closer to your Ford Fusion than before to use your key fob.
- The Lock, Unlock, Panic, Trunk Release, or Remote Start buttons sometimes don’t work.
- You cannot consistently enjoy your key fob benefits, such as locating and securing your vehicle with the Panic alarm.
- You get a “No key detected” message.
How To Change The Battery In A Ford Key Fob
Replacing the battery in your Ford key fob is a pretty simple process. Youll just need a few tools and youll be able to do it in a matter of minutes.
What youll need:
- A new CR2032 battery
Instructions:
- Start by using the small flathead screwdriver to remove the cover from the back of the key fob. Once the cover is off, you should see the battery.
- Use the flathead screwdriver to carefully pry out the old battery and then insert the new one making sure that the positive side is facing up.
- Once the new battery is in place, replace the cover and youre done.
- Your Ford key fob should now be working properly. If its still not working, you may need to take it to a dealer or locksmith to have it programmed or replaced.
Read Also: How To Replace Phone Battery
Simple Steps To Replace The Battery In Your Edge’s Keyless Entry Remote
A tiny button cell battery installed inside the your keyless entry remote. Move the key out of the way if it is in the remote key fob.
Gently try to disassemble your remote key fob with pry tools. Change one CR2450 battery with flat head screwdriver.
Change old battery with new one CR2450. Battery must be installed with the same polarity as was an old. Your key fob will not work if you by mistake put battery wrong way.
Before assembling keyless entry fob’s case, make sure that everything is functioning by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Carefully try to assemble the pieces together by hands from top to bottom. If your key body firmly closed, we done. If not, repeat the last step.
S To Replacing Your Ford Vehicles Key Fobs Batteries
How do you know when to replace your key FOBs batteries? Look for a message on your vehicles instrument cluster or display screen telling you that the battery is low. At that point, it is time to follow this quick guide to replacing the batteries.
Don’t Miss: How To Change Battery In Subaru Key Fob
Check Battery And Reset The Security System
After installing your new battery, test it and reset your Ford’s security system. You can do so by using it to lock and unlock your vehicle. After an effective installation, you should hear the door locks and see the parking lights in a response to the remote instructions. Update your Ford’s service records with the battery change.
Hearst Autos Research, produced independently of the Car and Driver editorial staff, provides articles about cars and the automotive industry to help readers make informed purchasing choices.
How A Key Fob Works
A key fob works by sending a radio signal to a receiver that is located inside the car. The receiver then activates the locks or the alarm.
Key fobs use rolling codes, which means that each time you press a button on the remote, it sends a different code to the receiver. This makes it difficult for someone to intercept the signal and unlock your car without your permission.
Read Also: Buick Lucerne 2007 Battery Location
Why Is My Ford Key Fob Not Working After A Battery Change
The Ford key fob is a great convenience, but it can also be a source of frustration when it doesnt work properly. If your Ford key fob isnt working after youve changed the battery, there are a few things you can try to get it working again.
This is a common problem that many Ford owners face. In this blog post, we will discuss the causes of this problem and how to fix it.
Your Ford key fob not working after a battery change is probably caused by the battery change itself. The key fob must be reset to the car after replacing the battery in the key fob remote, as the key was erased when the battery was changed. This is why nothing is operating with your key fob remote.
Youll need to reprogram the remote back to the vehicle once youve replaced the battery in your key fob remote.
Save 70% Over Dealerships
Weve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You’re also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin to make a livin not a killin!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at and well make sure that youre taken care of.
You May Like: 2012 Gmc Acadia Battery Location
Romeo Ford Of Kingston
If youre like most drivers, you probably use your key fob every day. From simple functions like locking your car doors to convenient features like push-button start and hands-free tailgate entry, your Ford