2017 Nissan Rogue Key Fob Battery

Share This Post

When To Replace Your Key Fob Battery

2017 Nissan Rogue – Intelligent Key Remote Battery Replacement (if so equipped)

How long your key fob battery lasts depends on several factors such as how often you use it, your climate, and if the battery has been replaced before. A new key fob battery should, on average last a few years before you need to replace it. If you recently replaced your key fob battery and the key fob is still not working correctly, the problem is likely with the key fob itself.

Recommended Reading: Is My Car Out Of Gas Or Dead Battery

How To Start Your Nissan With A Dead Key Fob

While you may need a Nissan key fob replacement, you can still get inside of the vehicle. All you need to do in order to access the interior of your Nissan is:

  • Flip the key fob over and push the small release latch on the back.
  • Remove the hidden emergency key.
  • Use the key to unlock the drivers side door.
  • And thats all you need to enter your Nissan Altima with a mechanical key!

    Nissan Key Fob Battery Change

    To avoid having to repeat these steps, youll want to replace the battery in your Nissan smart key. To do this:

  • Remove the hidden key you used to get into your Nissan.
  • Remove the key housing and take out the old battery after taking note of the position.
  • Replace the CR2025 battery with a new one, making sure the negative side of the battery is facing up toward you.
  • Put the key fob back together, and test it to ensure it works properly.
  • Also Check: Solar Battery Charger For Phone

    Want It Done Professionally

    Not really comfortable with doing this yourself? Thats totally fine! Our Service team at Palm Springs Nissan will be glad to help. Simply schedule an appointment and well get you in as soon as possible. And dont forget to check our service specials beforehand to make sure youre getting the lowest price possible.

    What To Do If There Is No Key Detected In A Nissan Key Fob


    Even if your Nissan fob battery is still good, there may be an instance where the vehicle does not detect it. In most cases, the battery is likely either low or dead, but there could be an issue with your Nissans remote key functions. If changing the battery doesnt help, reach out to our service department and well be happy to help.

    Also Check: Ring Spotlight Cam Battery Life

    Will A Dead Car Battery Cause Key Fob Not To Work

    In case your car key fob suddenly stops working after you change the battery, it could be because the battery wasnt properly installed.

    When changing the battery in a key fob, its important to follow the instructions in the owners manual. If you dont, you may not correctly reconnect the electronic components inside the fob, which can prevent it from working properly.

    Another possibility is that there is a problem with one of the electronic components inside the key fob itself. This is less likely if youve only recently changed the battery, but its still possible.

    In this case, youll need to take the key fob to a dealer or qualified locksmith to have it diagnosed and repaired.

    Starting The Engine With Dead Key Fob Battery

    If your Rogue has push button start/stop feature, your vehicle may not start due to weak key fob battery and a key not detected alert message may be displayed in the instrument cluster. Dont worry, you can still start your vehicle, the immobilizer is controlled by a passive transponder. Passive means, among other things, that the transponder in the key does not need its own power source.

    Touch the start/stop button with your key fob and then start the engine. If it doesnt work, then look in the owners manual for exact location of key fob placement, as it may vary depending on model.

    Also Check: Battery Power Generator For Home

    Why Is My Car Not Accepting My Key

    A bent key can be the reason why a car key wont work. If your key is bent, you can try straightening it out with a pair of needle-nose pliers. If that doesnt work, youll need to get a new key from your dealership.

    Another common reason why car keys stop working is that the transmitter battery is dead. You can usually tell if this is the case if your key fob feels lighter than usual.

    To change the battery, start by removing the screw on the back of the key fob using a small Phillips head screwdriver.

    Once the backplate is removed, you should see a small coin cell battery. Remove the old battery and replace it with a new one before putting the new battery back.

    What Customers Are Saying:

    2017 Nissan Rogue Sport – Intelligent Key Remote Battery Replacement (if so equipped)

    I was in trouble with an electrical issue with my brand new Nissan. I frantically went online trying to find help and luckily I found your site. I reached a NISSAN tech named RIP. He was absolutely tremendous and helped me work through the issue. What a pro!

    cjazLexington, KY

    I would recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I’ll be back whenever I need a question answered in a hurry.

    Stephanie PElm City, NC

    used your service this weekend with “Trecers” help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 “tracer” fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

    David L.Richmond, TX

    9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

    PhilMarysville, CA

    Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

    CharlesWalnut Creek, CA

    Recommended Reading: Car Battery How Many Volts

    Key Fob Not Working After Replacing The Battery

    When purchasing a new battery for the key fob of your Rogue, keep in mind that the battery may be sitting on the shelf for a long time. Therefore after replacement it may not work, or may not last that long. Try purchasing the battery from a store where stock moves fast. If you still cant get the key fob to work after verifying that the battery is healthy, your key fob issues may not be due to bad battery.

    Why Is My Car Not Detecting My Key Fob

    In case your Nissan key fob isnt working after youve changed the battery, its possible that the new battery is dead or not properly seated. Try removing and then re-inserting the battery to see if that solves the problem. If not, there are a few other things you can try.

    One possibility is that the key fob itself is damaged and needs to be replaced. Another possibility is that there is an issue with the cars electrical system.

    If neither of these solutions solves the problem, you should take your car to a Nissan dealer or qualified mechanic for further diagnosis.

    You May Like: The Forever Battery Stock Symbol

    Use Obd2 Scanner For Diagnosis

    Since Nissan Rogue is equipped with on-board diagnostics , a fault diagnosis can provide initial indications of where the malfunction is located. This method will be especially useful when diagnosing a faulty remote keyless system receiver module.

    To begin troubleshooting, you must first connect the diagnostic tool to your Rogue. The OBDII connector is usually located under the dashboard. With the tool connected, turn on the ignition. Most diagnostic devices then ask for some information about the vehicle. It is important that you enter this 100% correctly, otherwise the result of the search may be inaccurate. In addition to the vehicle make, model, and engine type, you usually also have to type in the Vehicle Identification Number . Since some OBD codes are manufacturer-specific, the scanner will be able to give you more accurate information if you enter more details about your Rogue.

    Nissan Key Fob Battery Replacement: What To Watch Out For

    2011 Nissan Rogue Battery ~ Perfect Nissan

    Though the procedure is relatively simple. It would be best if you were careful of a few things when doing a Nissan key fob battery replacement:

    • When opening the casing into two parts, dont use the grooves on the side of the case as a point to lever your screwdriver. Older keys have these side grooves, but ignore those and focus on the slits at the top.
    • When prying open the casing from the top, apply only a little force to avoid damaging the edge or any internal parts.
    • Keep your key fob away from anything magnetic while changing the battery. Magnets can cause damage to the inner workings of your Nissan key fob.
    • When replacing the battery, ensure that you put the side with the writing Panasonic CR 2032 face down into the battery casing. If you put it in the wrong way, it wont work.

    Also Check: Who Sells Auto Craft Batteries

    Recommended Reading: Google Pixel 6 Pro Battery

    Easy Steps To Change Your Nissan Key Fob Battery

    Nissan has used a similar fob for several years now, but that doesnt make it any more obvious how to change the battery. Below is a quick 6-step guide for exactly how to change your Nissan key fob battery.

    1 year, 4 months ago

    For several years, Nissan drivers have used a similar 4- or 5-button key fob called the Intelligent Key. There have been subtle changes up to 2021, but the unit remains essentially the same. Obviously, the key fob is crucial to the everyday operation of the car. You might need a working key fob to open up or start your vehicle. You wont be able to lock it remotely, either. In other words, keeping your key fob supplied with power is always a good idea. The good news on modern Nissan key fob battery units is that there is a flashing light on the casing. When the light stops flashing, it indicates that the battery needs changing. Its designed to act as a warning: if there isnt enough power to keep the light blinking, then there isnt enough power to communicate with your Nissan. In todays blog, were looking at Nissan key fob battery replacement, how its done, and how often you might have to do it. Well also include some additional tips about your key fob.

    Process overview:

    Read Also: Multimeter To Test Car Battery

    Things To Know Before Calling Your Locksmith For Key Fob Programming

    When programming a transponder key onboard or programming a remote headed key onboard, the locksmith will need to research several pieces of information before the process can be successfully completed. The locksmith will need to know the following:

    • What is the Year, Make, and Model of your car?
    • How many working keys you currently have?
    • Are you the current registered owner of the car?
    • Does the car require a BCM conversion or a Pin code read?
    • Did you purchase the key off Amazon?
    • Did you purchase the correct remote headed key?
    • Is the FCC number on the correct?
    • Is the battery of your car fully charged?
    • Should the locksmith program by vehicle or by type?

    A lot of this lingo is locksmith specific, but it just goes to show that a lot of research is needed before connecting sensitive computer equipment to your car. The locksmith does not want to damage your car or their equipment.

    Some remote keys can be programmed fairly easily on your own, and a professional locksmith will be able to guide you through this step with a simple phone call. However, many models require a complex programming sequence best handled by the locksmith, either at their shop or at your location via a mobile service unit.

    Recommended Reading: Do All Smoke Detectors Have Batteries

    What Happens If My Key Fob Dies While Driving

    Nothing will happen if your key fob dies while youre driving. Your car will continue to run as normal and all of the electronic features in your vehicle will still work.

    However, you will not be able to lock or unlock your doors, open the trunk, or set the alarm with the key fob. Youll still be able to start the car and drive it without any issues.

    How Long Does Nissan Key Fob Battery Last

    2017-Present Nissan Rogue Sport – How to Replace the Key Fob Battery

    The battery is a primary battery, not rechargeable. Stored under normal room temperatures, the battery has a shelf life of 10years, while being used in Nissan key fob, the battery can last from 3years and above.

    The CR2032 battery has a wide operating temperature from -20°C to as high as +60°C. The battery usually weighs 3.0 grams.

    You May Like: How To Change Battery In Liftmaster Garage Door Opener

    Recommended Reading: Battery Powered Generator For Home

    Getting Into Your Nissan

    The first thing youll need to do is get into your Nissan vehicle. You may need a Nissan key fob replacement, but you can still get into your car and go in the meantime.

    • First, flip the key fob over, then push the the small release latch.
    • Pull out the hidden emergency key from the bottom of the fob.
    • Insert the key in the drivers side door and unlock it to enter.

    How To Start A Nissan With A Dead Key Fob

    Imagine going to start your Nissan to get to work in Dearborn, run some errands, or head out to some fun evening plans near Troy, but when you try to get into or start the car nothing happens. If youre in this situation, it may be your Nissan key fob battery, and it may need to be replaced. But can you can start a Nissan with a dead key fob? The answer is yes.

    You May Like: Honda Key Fob Battery Replacement

    What Kind Of Battery Does Nissan Key Fob Use

    The Nissan key fob uses one CR2032 battery that gives 3 volts. This is a lithium coin battery. It is similar to CR2025 though it is slightly smaller in size than the CR2025.

    What do the letters and the numbers in the CR2032 battery mean?

    C- is used to identify lithium manganese dioxide. This is the chemical substance used to make the battery

    R- signifies that the battery is Round.

    The 4 digits after the letters refer to size. The first two indicate the diameter while the last two indicate the thickness.

    In our case CR2032 battery it means itâs a battery that uses lithium manganese dioxide and has a diameter of 20mm and a thickness of 3.2mm

    Other batteries designated as DL2032, BR2032, KL2032, L2032, ECR2032, KCR2032, E-CR2032, and KECR2032 will all fit in the key fob.

    Nissan Key Fob Not Working After Battery Change

    nissan rogue sport key fob battery

    A key fob is a small, hand-held remote control device used to lock and unlock a vehicles doors, trunk, or sunroof. Many new vehicles come equipped with keyless entry systems, which allow the driver to enter and start the car without ever having to touch the key fob.

    These systems use a small transmitter inside the key fob to communicate with the cars computer system. So, why is my Nissan key fob not working after a battery change?

    The most common reason for a key fob not working after a battery change is that it has to be reset first. Other causes include broken contacts and misalignment of buttons which could have happened when you swapped the battery.

    Don’t Miss: Replacing Jeep Key Fob Battery

    Nissan Rogue Key Fob Basics: Remote Start Unlock And Lock

    • To start your Nissan Rogue remotely, press the lock button. Within the next five seconds, hold the start engine button for two seconds.
    • To unlock your Nissan Rogue, press the unlock button. Youâll know the unlock is successful when you hear a mechanical noise.
    • To lock your Nissan Rogue, click the lock button. Signaling hazard lights and a single horn beep will confirm a successful lock.

    What To Do In Case Of Water Damage

    If your Rogue key fob stopping working after exposure to clean tap water or rain, immediately remove the battery and clean the electronic component with paper towel and let it dry fully before putting back the battery. In case of exposure to salt water, or soapy or dirty water, it is recommended to clean the chip with isopropyl alcohol or electronic cleaner. If the key fob still doesnt work after cleaning and drying, the chip is probably fried and you will have to buy a new key.

    You May Like: Battery Backup For Oxygen Concentrator

    For Vehicles With A Starter Button

    There is a chip in the vehicle key. It is used to automatically deactivate the electronic immobilizer when there is a valid remote control vehicle key in the vehicle interior. The electronic immobilizer is automatically activated as soon as there is no valid vehicle key in the vehicle.

    The engine can only be started with a genuine vehicle key that is coded correctly. You can obtain coded vehicle keys from an authorized Nissan dealer.

    How Do I Replace My Nissan Key Fob Battery

    2010 – 2020 Nissan Rogue Key Fob Battery Replacement

    The process of changing your battery may be unique to other vehicles from the same manufacturer, so you’ll want to refer to your owner’s manual before removing your current battery. You also want to take note of what specific battery type and size you need to have on hand before replacing your key fob battery.

    Release the mechanical key inside of your fob using the release latch on the fob.

    A small, flathead screwdriver will help remove the cover to the battery compartment. Before you remove the battery, take note of which direction the positive and negative sides are in.

    Replace the old battery with a brand new battery. Pay close attention to ensure that you’ve put the correct side of the battery in first.

    Regardless of what model you’re replacing the battery for, you can generally use these instructions as a guide for the process. If you’re having trouble or are confused with the process, feel free to contact ABC Nissan for more information. You can also bring your Nissan key fob into our service department for assistance.

    Recommended Reading: Recycle Aa Batteries For Cash

    Related Posts

    Surface Pro 8 Battery Life

    Microsoft Surface...

    Iphone 13 Pro Max Battery Life Hours

    Understanding Iphone...