Battery Replacement Jeep Key Fob

Share This Post

Why Our Key Services

Key Fob Battery Replacement | How To | 2021 Jeep Cherokee

Your vehicle gets you reliably where you need to be, but without a working key fob, getting around is a lot more difficult. Some newer vehicles won’t even start without one. Whether youve misplaced your keys, you need a new key cut, your existing fob is damaged, or you just want a spare, have your key fob repaired, re-powered or replaced at Batteries Plus Bulbs.Our experts will help you with a simple battery replacement or give you a whole new keyless entry replacement if yours stops working. Contact us online or come visit a store near you for fast service even without an appointment.

Jeep Key Replacement Experts

Contact us ASAP if you don’t know where to go when you need a keep key replacement! As we provide you with all its services, including Jeep key cutting, Jeep duplicate key, and Jeep key copy. In Addition, we can assist you with the Jeep remote key replacement and ignition key replacement with the highest quality in Dallas, TX, 24/7!

Jeep Key Fob Replacement in Dallas TX has years of experience treating luxurious jeep cars, so we offer key replacements among the top jeep car in town. We gain many of our customers due to our use of the most up-to-date Jeep key hardware and equipment. We gain all the needed knowledge to resolve any jeep key replacement from A& Z.

Jeep Grand Cherokee Key Fob Battery Replacement Cost

Key fob replacement often entails visiting a car dealer or, at least, a specialist shop equipped with high-tech instruments capable of teaching these upgraded keys to communicate with a vehicles security system.

Even todays most basic automobiles have keys that include a chip that connects with a transponder located somewhere within the vehicle. You wont be able to start your automobile until you properly configure your key fob, also known as a key fob.

More modern systems include a key fob that may be carried in your pocket or handbag. As you can expect, replacing these key fobs may be costly, and having them reprogrammed with that specialized equipment can be even more so.

The cost of replacing a Jeep Grand Cherokees key fob battery ranges from $150 to $600.

Don’t Miss: How To Replace Phone Battery

How To Replace The Battery In Your Jeep Wrangler Jk Key Fob

It’s easy to replace the battery in your remote key fob. The fob is made of two plastic parts that snap together. Inside is a small circuit board, a rubber key pad and a battery.

To replace the battery, follow these steps:

  • Insert a small flathead screwdriver into the seam near the keyring mount.
  • Press down on the screwdriver to force the key apart at the seam.
  • Remove the battery from the housing.
  • Insert a new CR2032 battery with the negative side down.
  • Place the circuit board into the key pad, then the key pad into the key.
  • Snap the two halves together starting at near the key and working to the end.
  • Tools you’ll need to complete this project:

    • Small flathead screwdriver

    What Battery Does A Jeep Renegade Key Need

    2014 Jeep Grand Cherokee Key fob Battery

    A CR2032 3v lithium battery powers a Jeep Renegade key fob. You can purchase this battery on , eBay, Walmart, and Target. Ensure their battery size and voltage match your specific needs. It is also best to examine their authenticity since there are numerous imitations on the market. You can test if its fake by using a voltage meter. Authentic CR2032 batteries should output 3 volts. If the battery outputs less than 3 volts, then its probably a counterfeit.

    Read Also: Cost Of Car Battery Replacement

    Jeep Key Fob Not Working Or Detected: Fix It Easily

    A key fob is one of the most popular and versatile accessories for the modern commuter like a car and jeep. An electric key fob that allows you to control your keyless entry system, arm or disarm alarm systems, start your car, turn lights on and off, and maintain heating and air conditioning.

    But sometimes, the key fob fails to provide its desired service in your jeep wrangler and Grand Cherokee. If youre having problems with your Jeep key fob not working or detected, then youve come to the right place!

    In this article, I will talk about the issues that are faced by jeep users who have problems with their Jeep Key Fobs. If the key fob problem is very basic, then this article can save your time, money, and money.

    How To Start A Jeep Wrangler When Your Key Fob Battery Is Dead

    • Press and hold the brake pedal, like you normally would when you start the car.
    • Turn your key fob so that the top corner is facing the ignition button. You can tell that itâs the top corner because itâs right next to the silver button that releases the mechanical key.
    • Push the key fob directly into the ignition button. And thatâs all there is to it! Even if your fob battery is dead, your Wrangler should still start up with no problem. If youâre more of a visual learner, check out this excellent video tutorial.

    needCR2032 batteryMORE

    Don’t Miss: Replacement Battery For Tecsun Pl 880

    What Kind Of Batteries Do Jeep Key Fobs Take

    A Jeep key fob takes a CR2032 3-volt lithium battery, especially if built between 2015 and 2021. But this depends on your Jeep model. If you arent sure what type of battery your Jeep key fob uses, here are ways you can do to find it out:

    • Open the battery cover on the back of your key fob and look at the battery type it needs.
    • Check your owners manual for the exact information about your key fob. You may check a copy of it online if you misplaced its hard copy.
    • Ask your dealership about the needed battery information of your specific key fob, or seek a mechanic to figure it out.

    Donât Miss: Battery Keeps Dying In Car

    How Long Does A Battery Last In A Key Fob

    Jeep Renegade Key Fob Battery Replacement (2015 – 2021)

    When purchasing a brand new Jeep Wrangler, you will get a pair of key fob with brand new batteries. There is no definite time for the battery to last, but my rough estimate is around 3 to 4 years. It all depends on how many times you use the key fob every day, contributing to battery usage.

    However, since the key fob usually comes in pair, I suggest that you use the two alternately to save battery power for a while. But if worse comes to worst, then changing the key fobs battery will be needed once the battery will be finish. I tell you, it is an easy thing to do that I can say that even teenagers can do it.

    You May Like: Battery Replacement At Apple Store

    Also Check: Interstate Batteries Srm-27 Marine/rv Deep Cycle Battery

    Simple Steps To Change The Battery In Your Renegades Keyless Entry Remote

    A button cell battery installed inside the your keyless entry remote. Move the key out of the way if it is in the keyless entry remote.

    Gently try to open your fob with pry tools. Replace 1 CR2032 battery with flat head screwdriver.

    Replace old battery with fresh one CR2032. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you put battery wrong way.

    Before assembling fobs case, check that all functions works by testing buttons on circuit board.

    At this point squeeze fobs back cover together. Line your shell two halves together and put it together by hands from top to bottom. If your key fob shell firmly closed, we done. If not, repeat the last step.

    You May Like: Hp Elitebook 840 G5 Battery

    Signs Your Key Fob Needs A Battery Replacement

    The transmitter loses its range when the fob battery becomes weaker. If you notice you have to be a lot closer to your car than usual, thatâs a sign that your range is decreasing. This is an indicator to change your battery. Other signals include:

    • If your key is not giving out any signal
    • If you have to press the button repeatedly before your vehicle accepts the signal
    • If your key remote is inconsistent or unreliable

    Read Also: Portable Lithium Battery Power Station

    Jeep Wrangler Key Fob Battery

    2016 jeep cherokee key fob. 2016 jeep grand cherokee key fob battery replacement. Fob liberty jeep key battery replacement guide 2016 jeep wrangler key fob battery

    For 2006-2016 Jeep Wrangler Keyless Entry Car Remote Key Fob 315Mhz. 9 Pics about For 2006-2016 Jeep Wrangler Keyless Entry Car Remote Key Fob 315Mhz : Jeep-Grand-Cherokee-Key-Fob-Battery-Replacement-Guide-009, For 2011-2014 Chrysler 200/2006-2016 Jeep Wrangler Key Remote Fob and also For 2011-2014 Chrysler 200/2006-2016 Jeep Wrangler Key Remote Fob.

    What Happens If Your Car Key Battery Dies

    2015 Jeep Cherokee Key Fob Battery

    The key fob battery is an integral part of a car key. The battery powers the key and operates the remote function. With push-to-start vehicles, the key is necessary to power up the car in order to use it. As such, a dead battery can prevent your car from starting.

    If your battery dies, you can change it. You can do this yourself or reach out to a professional.

    Most smart keys are equipped with an emergency blade . An emergency blade is a mechanical key placed inside the fob. Itâs used to open the driversâ side door in an emergency .

    Don’t Miss: What Does Assault And Battery Mean

    How Do You Open A Jeep Grand Cherokee Key Fob

    I need to order a new battery for my Jeep Grand Cherokee key fob, but I donât know what kind I need. How do I open my key fob up to check the battery type?

    • Insert the flathead screwdriver into the space between the front and back part of the key fob near the key ring mount
    • Gently apply pressure to separate the key fob at the seam
    • Gently pry the battery out of its housing. At this point, you can read the battery to see what kind it is

    Reassemble The Key Fob Components

    After replacing the battery, you will need to reassemble the other pieces of the key fob. Start with placing the keypad into the housing where it fits, then the circuit board into the keypad. You should be all set once done with these steps. When reassembling, it is easiest to do the following. Place the half with the battery on the half with the keypad and circuit board, according to Quadratec.

    Also Check: Camry Hybrid Battery Replacement Cost

    The Secret To Quick Convenient Car Insurance Shopping

    shopping for car insuranceJerryâs super app45 secondsmore than 55 top insurerssave more than $800 a year on car insurance

    â made switching over to new insurance so quick and easy! My monthly payment went from $469 to $362 by switching me to Progressive. 10/10 would recommend!â âLuanne T.

    Thousands of customers saved on average $887/year on their car insurance with Jerry

    How To Change Jeep Key Fob Battery

    Key Fob Battery Replacement | How To | 2021 Jeep Renegade

    Generally, Jeep key fob batteries last between three to four years. But depending on how frequently it is used, the battery could die out much sooner. If you need to press the keypad repeatedly to lock your car doors or your key fob no longer works within 45 feet of your vehicle, it is high time for a battery replacement.

    Depending on the model, year, and trim of your Jeep, it may come with one of the following key fobs:

    Jeep Models
    Pear-shaped, 3V CR2016 1999 2004

    Except for the shape and some features, there is little to no difference between these key fob designs. That said, the steps required to change their battery are pretty similar. In this section, however, we will cover steps applicable to a fixed-key Jeep key fob :

    Recommended Reading: 2007 Buick Lucerne Battery Location

    Insert The Replacement Battery

    Typically, the negative side of the key fob battery is facing down, and the positive side is facing up. However, this may not be the case for all key fobs. For this reason, I advised earlier to take note of the polarity of the old battery that mental picture will serve as your foolproof guide on how to position the new battery.

    On the bright side, some Jeep key fobs have labels printed into the battery socket providing instructions on how the battery should be fitted.

    Using Multiple Wireless Devices

    The jeep is the place where we tend to keep our electronics, but having multiple wireless devices in the vehicle can ensure quality riding, commuting, and jeep anti-theft system.

    When youre driving, especially on the highway in Sport mode, distractions are everywhere by text messages, social media alerts, and news updates. All wireless devices like wifi, radio, and Bluetooth use different frequencies to keep the system alive.

    Sometimes, the key fob faces problems in ensuring its services among all the frequencies. So, it could be one of the causes of key fob problems in jeep Cherokee, Grand Cherokee, Rubicon, or Willys.

    You May Like: Car Battery For Toyota Camry

    Gently Pry At The Seam Or Notch

    Alaina DiGiacomo/rd.com

    When it comes to how to change the battery in your key fob, youll only need one tool. Using a small, thin flat-bladed screwdriver , pry apart the two halves gently to open the fob down the middle. Most cars with key fobs and transponder keys wont let you lock your keys inside the car, but you need to be prepared just in case the worst case happens. .

    The Empty Or Dead Battery In The Key Fob

    Amazon.com: Replacement Key Fob Keyless Entry Remote for Chrysler/Dodge ...

    A battery with an electric connection is the main power source for running any electric device. So when you fail to provide that power to the electric device, you will definitely find some issues.

    If you are using your key fob for an extended period of time, it is likely that the battery is dead. If this is the case, you will need to replace the battery.

    Also Check: Kubota Tractor Battery Cross Reference Chart

    Batteries Plus Phone Repair

    Bring in your broken devices for expert tablet and cell phone repair. Our technicians provide a wide range of services, including iPhone screen repair, iPhone battery replacement, Samsung repair, Galaxy S8 screen replacement, as well as repairs for your Galaxy Fold, Note10, Google Pixel, LG, HTC, Motorola, or Nokia phone. We even fix broken ports, speakers, and buttons.

    Jeep Key Battery Replacement: Signs Your Need A Change

    Sometimes, you can’t tell if your problems will be solved with a Jeep key battery replacement. Green Bay drivers often recognize these signs that it’s time to change the battery in a Jeep key fob:

    • Unlocking and locking takes multiple tries: It throws off your rhythm when your locks don’t respond, so it’s likely that these are the first signs Appleton drivers recognize. If you find yourself pressing the buttons repeatedly just to get the key fob to communicate, change the battery in your Jeep key fob.

    • Limited range: Your key fob battery works up to 50 feet away from the vehicle. When it’s time for a battery change, you’ll notice the range decreasing.

    In the best conditions, your Jeep key fob battery lasts 3 – 4 years. Once you’re reaching the limit of your battery, trust the Kolosso CDJR parts center or a local hardware store for the right battery for your key fob.

    Recommended Reading: 2016 Ford Escape Battery Replacement

    Use It According To The User Guide

    User manuals are essential parts of any electronic device like jeep key fobs that help users to understand how to use the product or how it works.

    When you dont understand the key fobs behavior, you should read the user guide book or see an adequate tutorial about that. This will help you to detect any key fob problems and ensure a quality user experience.

    Do Jeep Renegades Break Down A Lot

    Jeep Wrangler Key Fob Battery Replacement (2018 – 2021)

    According to Off Roadable, people have been reporting that their Renegade models are doing just fine. Some drivers have reached between 80,000 to 90,000 miles, while others have made it over 150,000 miles. However, the Jeep Renegade seems to be free of major mechanical problems for the most part.

    Read Also: Do Garage Door Openers Have Batteries

    Read Also: Duralast Battery 1-6volt Group Size 1 575 Cca

    Jeep Grand Cherokee Key Fob Battery Replacement

    If you want to replace the key fob battery for a 2015 to 2020 Jeep Grand Cherokee, you will need a small flathead screwdriver to pry apart the two halves of the key fob. You will also need a replacement coin cell, also known as the watch or button.

    Once you have the screwdriver and the coin cell, you should follow these steps to replace the battery:

  • Slide the black plastic switch on the front of the key fob near the bottom to release the metal ignition key.
  • Pull the metal ignition key from the fob and place it in a safe place.
  • Insert the blade of the small flathead screwdriver into the slot where the metal ignition key used to be and gently pry apart the two halves of the fob.
  • Pull apart the two halves of the key fob. This will reveal the green plastic remote control circuit board and the battery holder inside the rear cover.
  • Remove the old battery out of the rear cover using your fingernail, or you can use the small flathead screwdriver.
  • The rear cover of the key fob is marked with the words CR2032 + Side down.
  • Insert the new CR2032 3-volt battery with the positive + side facing down into the rear cover of the key fob.
  • Line up the two halves of the fob and gently snap them back together.
  • Ensure that the two halves of the fob are flush together all the way around at every edge.
  • Slide the metal ignition key back into the slot on the bottom of the fob until it clicks securely into place.
  • Read Also: Hyundai Key Fob Battery Replacement

    Related Posts

    Iphone 13 Pro Max Battery Life Hours

    Understanding Iphone...

    Surface Pro 8 Battery Life

    Microsoft Surface...