Car Key Battery Replacement Toyota

Share This Post

What Happens If Your Car Key Battery Dies

How to Replace Your Toyota Key Fob Battery – McPhillips Toyota Car Guide

The key fob battery is an integral part of a car key. The battery powers the key and operates the remote function. With push-to-start vehicles, the key is necessary to power up the car in order to use it. As such, a dead battery can prevent your car from starting.

If your battery dies, you can change it. You can do this yourself or reach out to a professional.

Most smart keys are equipped with an emergency blade . An emergency blade is a mechanical key placed inside the fob. It’s used to open the drivers’ side door in an emergency .

Can You Drive With A Dead Key Fob

No auto manufacturer is going to pin everything on the key fob working all the time. Therefore, even if your battery dies, you can still use the fob to drive the car.

  • Despite most cars going keyless, several of them still have a key slot usually located on the steering column. It will typically be covered by a plastic cover which you can pop off. Once you insert the physical key into it, you can easily turn on the car and drive away.
  • Some cars begin ignition with the START button, which switches on the car only if the key is detected. With a dead battery, the car may not recognize the key fob and hence the START button may be unresponsive. In such cases, you can use the fob itself to push the START button, which will switch on the car.
  • Some vehicles like Fords have a slot on the steering column where you can insert the fob, which will start the vehicle.

How Much Does It Cost To Replace A Toyota Car Key Battery

In general, you can expect to spend around $50 to have a local locksmith or dealership replace the battery in your Toyota car key. This price may vary depending on the type of battery that is used and the location where you have it replaced.

You can also purchase replacement batteries from online retailers for around $10 to $15. So, if you think that you might be able to replace the battery yourself, it might be worth buying a new one to save some money.

Read Also: 2006 Buick Lucerne Battery Location

What If You Need A Full Toyota Key Fob Replacement

Toyota key replacement is easy. We’ve helped several of our Naperville area drivers who have managed to lose or even destroy their key fobs. So, if this has happened to you, you’re in good company! Simply contact our parts department for a Toyota key fob replacement, and make sure to check our parts specials to see if there are discounts that apply. And if all you need is a replacement key without the fob, we can cut one for you!

How To Charge The Remote Battery At Home

Car Key Keypad + Battery Suitable For Toyota Avensis Aygo Corolla RAV4 ...

In order to charge the remote battery at home, you will need to have a few things handy. First, you will need the remote itself. Second, you will need a charging cord that is compatible with the remote.

Finally, you will need either an outlet to plug the cord into or a USB port. Once you have gathered all of these items, you can begin charging your remote battery by following these steps.

  • First, find the charging port on the remote control
  • This is usually located on the back or bottom of the device
  • Next, insert the charging cable into the port
  • Once the cable is inserted, plug it into a power outlet
  • The remote should begin charging immediately and will be ready to use once the battery is full

Read Also: 2012 Dodge Journey Battery Location

Changing Out The Battery In A Volkswagen Key Fob

For changing a battery in a VW key fob, you will need a CR2032 or CR2025 3V battery. These are circular batteries that look like small discs . Youll also need a tool to pry out the battery, like a small flat-blade screwdriver.

  • Flip open the key by pressing the metal button.
  • Locate the battery panel of the key, right beneath the Volkswagen logo.
  • From the now-empty key cavity, push up on the panel.
  • Remove the battery panel.
  • Insert the prying tool into slot, apply force.
  • Set aside the old battery.
  • Place the new battery in slot with + symbol facing you.
  • Snap the new battery into place.
  • Replace the battery panel.
  • Enjoy your now fully-functioning and working key fob!
  • Here is a handy video explaining the process.

    What Do You Do When Your Keyless Remote Battery Is Low

    If you have a keyless remote, also known as a key fob, for your car, you may have noticed that the battery is starting to run low. When this happens, the range of the remote will start to decrease and it may even stop working altogether. If you find yourself in this situation, there are a few things you can do to get your keyless remote working again. First, try replacing the battery with a new one. Many times, this will be all that is needed to get your remote working again. If you are unsure of how to do this, consult your owners manual or contact your dealership. If replacing the battery does not work, there are other options you can try.

    Also Check: Nest Protect Battery Vs Wired

    Kia Car Key Fob Battery Replacement

    • Hold and pull the top metal part of the fob you will pull out the reserve metal key
    • Take a flathead screwdriver and put it into the hole opposite of the key hole
    • Turn and wiggle gently to open the fob along the side of the fob
    • Once it is open, the circuit board will probably fall out but dont fret
    • Take the screwdriver again and pry the battery out but lifting it out of its place
    • Replace the battery and click it back into place
    • Return the circuit board and line it with the rubber lining inside the key

    How Do You Change The Battery In A Toyota Keyless Remote

    How to â? Toyota Key Fob Remote Keyless Battery Change/Replace
  • Take your key FOB and locate the prying notch at its base.
  • Use a flat-bladed screwdriver to gently pry the two plastic halves apart.
  • Slide the old battery out of the slot and slide in the new battery.
  • Line up the 2 halves of the FOB and press them together until they click.
  • This battery replacement is very easy and takes about a minute or so if you have the new battery ready to go.

    Im not sure how much different these types of batteries are, but Ive always had good luck with the Panasonic CR2032 batteries. The last one I used lasted over 4 years of pretty much daily use.

    Also Check: Checking Car Battery With Multimeter

    Don’t Miss: Difference In Battery And Assault

    What Is A Key Fob

    A key fob sometimes called a remote keyless system is a handheld device that allows you to lock and unlock your vehicle remotely. It consists of a remote control and RFID antenna that is connected to your cars locking system. Some key fobs have a retractable physical key with which you can lock/unlock your car manually as well.

    Q3 How Do You Change The Car Key Battery Yourself

    Ans. First check the battery type in the plastic housing. Then pry open the 2 halves of the key fob. Check the battery terminals positive and negative ends. Remove the old battery and discard it. Place the new battery in the correct position at the correct terminals. Assemble the key fob in the same way you had disassembled it.

    You May Like: Interstate Deep Cycle Marine Battery Srm-24

    How Does The Key Fob Work

    This system works based on the verification code matching mechanism between 3 parts of the system: the smart key controller, the fob control device and the vehicles central processor.

    The central processing unit of the SCU controller will be started when the user presses the ignition key.

    At this time, the built-in Antenna will compare the confirmation code with the key fob control device.

    It should be noted that this reconciliation process only takes place within the range of signal exchange allowed and when the remote key is on.

    When it is off, even within the range of the permitted signal exchange, this code matching process cannot occur.

    At the end of the verification code comparison process between SCU and the key fob, the driver can turn the lock knob to switch the ignition off or on, unlock the cars neck, and lock the saddle.

    And when the driver turns the ignition knob to the On position, the SCU intelligent control unit will send a synchronous ID to the central processor.

    The ECM central processor will compare this ID with the code installed and stored in memory. Only when the matching is complete can the engine be started.

    Signs Your Key Fob Needs A Battery Replacement

    Varta Car Key Battery Suitable For Toyota Auris Avensis Aygo Corolla ...

    The transmitter loses its range when the fob battery becomes weaker. If you notice you have to be a lot closer to your car than usual, that’s a sign that your range is decreasing. This is an indicator to change your battery. Other signals include:

    • If your key is not giving out any signal
    • If you have to press the button repeatedly before your vehicle accepts the signal
    • If your key remote is inconsistent or unreliable

    Also Check: The Forever Battery Stock Symbol

    How To Charge Key Fob Battery

    If your key fob starts to act up, one of the first things you should check is the battery. Many modern key fobs use lithium batteries, which can last for years. But eventually, they will need to be replaced. Heres how to change the battery in a key fob:

    1. Start by finding the right type of battery for your key fob. Most key fobs use CR2032 or CR2025 batteries. You can find these at any electronics store or online.

    2. Use a small screwdriver or knife to pry open the back of the key fob. Some models may have a small release button that you need to press before opening them up. 3. Remove the old battery from the key fob and insert the new one, making sure that the positive side is facing up.

    4. Close up the back of the key fob and test it out!

    Lets Welcome Rusty To The Team

    The HogWatch team is excited to announce our new partner, the Nascar legend Rusty Wallace! Rusty is a racing icon, public speaker, and member of the the NASCAR Hall of Fame. We are looking forward to partnering with him for events, commercials, and more! Stay tuned for upcoming appearances by Rusty at an event near you.

    You May Like: Battery Life Of Iphone Se

    You May Like: Solar Panel Charger For Battery

    Toyota Key Fob Not Working After Battery Change: What To Do

    After a long period of using the keyless entry remote of your Toyota, one day, you cant turn it on.

    When a car key remote stops working, most drivers think its because of a dead battery and buy a new replacement battery.

    However, in some cases, a fresh battery could not help solve the problem, and your key fob is still inactive. So what should you do when the Toyota key fob not working after battery change?

    If you are having the same problem, this article is for you. Getting more understanding about this issue will help you solve it on your own.

    Well go into details about the function of the key remote control, why a key fob stops working, and how to fix it. Without further ado, lets dive in.

    Toyota Key Fob Battery Replacement: Step By Step

    How To Replace A Toyota Key Fob Battery-Corolla, Camry, Etc.

    The helpful team members in our parts department will be happy to swap out your key fob battery for you. However, if you, like a lot of our customers, would like to change it yourself, follow these steps for proper Toyota key fob battery replacement:

  • Remove the key from the fob. There’s a little metal button right above the key part of your key fob. Press that button, and pull out the key.
  • Open the fob. Fit a small screwdriver or some other flat object into the little slot that the key fits into, and pop open the fob.
  • Remove the green circuit board. Do this gently, so as not to damage the components.
  • Replace the battery. Take note of the kind of battery you need to replace, which should be written on a label on the original battery. You can also find this in your owner’s manual most Toyota key fobs require a CR 2032 3V. You can find a replacement battery at most electronic stores, or you can order one online.
  • Put the fob back together, and place the key back in the fob.
  • Also Check: Emergency Exit Lights With Battery Backup

    Key Battery Low Meaning

    The Key Battery Low message on your Toyota Prius indicates that the key battery is running low and needs to be replaced. The key battery is what allows you to unlock and start your car.

    When the key battery is not replaced, eventually the key will stop working entirely. This means that you will not be able to unlock or start your car. Therefore, it is important to replace the key battery as soon as you receive the warning message.

    How To Unlock And Start Your Toyota With A Dead Smart Key

    Toyota Smart Key fobs house a mechanical key to help you get inside of your vehicle when the Smart Key stops working. Look towards the bottom of your key fob for a small button that will release the inner key, which you can pull out and use on your vehicle like a traditional key.

    Once inside, hold your vehicles Smart Key against dashboard while pressing the brake pedal and your push-button should show a green light and allow you to start your vehicle. If this doesnt get your vehicle started and your power door locks also arent working then you might be dealing with a weak engine battery, not a dead Smart Key.

    Also Check: Nissan Altima Battery Positive And Negative

    Can You Unlock Your Car With A Dead Key Fob

    Yes! Having a dead battery in your car key fob does not mean that you are left stranded. Car manufacturers have foreseen this situation and built-in fail-safes to ensure you can unlock your car even in such a situation.

    Heres what you should do:

    • All car manufacturers include a mechanical key in the cars key fob. This can be accessed by sliding/pressing a small button usually located on the side of the key fob, which will remove the fob cover.
    • Once you get the mechanical key out of the fob, insert it into the key slot and turn it to unlock/lock your car.

    Mechanical keys are usually included in the key fobs of all major car manufacturers like Honda, Kia, Toyota, Mercedes, Ford, etc.

    How To Change Toyota Camry Key Battery

    GZYF 1PC Replacement Car Remote Entry Key Fob W/ Batteries ...

    The instructions for the Toyota Camry are almost identical to those for the other years models. It contains a digital display that will show you whether the battery is going low. If you see this, you must replace it immediately or risk leaving the critical fob dead for an extended period.

    Heres how you do it:

    • Pull out the manual key by pressing the lock on the fobs side.
    • The key fob should be prayed openly at the end of the manual key. Place the keys end within the narrow area, parallel to the space from whence you drew it.
    • To remove the fob, twist the manual key.
    • The battery gets located on the opposite side of both the circuit board. Insert the manual key into the board and pull it out.
    • Take out the battery.
    • Change the battery with a new CR 1632, which would be the vehicle key battery used by the Camry.
    • Reassemble the pieces and check that it works properly.

    Why Is Driving on An Expressway Is Different? Read here.

    Recommended Reading: 2009 Toyota Camry Hybrid Battery Replacement

    Mercedes Car Key Fob Battery Replacement

    To open a Mercedes-Benz Chrome Key and replace the battery:

    • First, you have to push down on the silver, square-shaped button on the bottom of the key
    • Slide off the bottom cover
    • Once you separate the cover, youll see a small drawer in the fob
    • Pull the drawer out and pop off the old battery
    • Make sure the new battery is facing the correct way and put it in
    • Slide the cover back

    What battery does Mercedes key take?

    The battery type for your Mercedes-Benz key fob should always be CR 3025 or CR3032. The Smart Key uses two 3-volt CR 2025 batteries while the Chrome Key uses just one.

    What Happens If Your Prius Key Battery Dies

    In case your Prius key battery dies, the vehicle can still be started by using the physical key. However, you will not be able to use any of the remote functions of the key fob, such as unlocking the doors or opening the trunk.

    Sometimes, the smart key system may also become disabled if the key fob battery is completely dead. In this case, you will need to take your Prius to a Toyota dealership in order to have the system reset.

    Read Also: How To Show Battery Percentage On Iphone 13 Pro Max

    Is It Still Not Working

    If your car key fob is not working after switching out the battery, then the fob itself could be malfunctioning. There is also a chance that it could be a mechanical issue. There may be ways to fix this yourself, but the easiest way to make sure its fixed and done correctly is to have a professional do it for you. Electrical components can be very tricky to repair without proper know-how.

    Read Also: Add Battery To Solar System

    Related Posts