Change Battery On Honeywell Thermostat

Share This Post

Do All Honeywell Thermostats Use Batteries

How to Change Batteries on Honeywell Thermostat RTH2300 RTH221

Although most Honeywell thermostats run on batteries, some models get their power directly from the main power supply and dont use any batteries, except in some instances as a backup power source.

In this article, Ill only discuss Honeywell models which run on batteries and briefly refer to thermostats where the batteries are only for backup purposes.

Check The Panel Placement

You need to make sure to reinstall the faceplate correctly after replacing batteries.

Faceplates that are incorrectly installed may look incorrect. The pins of the control panel need to be making contact with the baseplate.

If you notice that the panel doesnt look right, carefully remove it and reinstall it.

Take your time doing this so that everything lines up.

How To Replace Battery In Honeywell Thermostat

Honeywell Thermostat has been my favorite for years, not just because of its lengthy 100-year history, but also because of the variety of thermostats it has provided throughout the years. From the Series 1000 to modern smart Wi-Fi-equipped thermostats, you may find everything you need within your price range. However, because of its numerous variants, we are frequently perplexed about the proper approach for changing batteries, since the process varies depending on the model.

So, how do I change the battery in my Honeywell thermostat? In general, you may change the Honeywell thermostats batteries by simply taking out the cover plate or sliding out the battery compartment. Replace the battery and return it to its original position.

Recommended Reading: Smoke Detector Beeping After Battery Change

When Should The Honeywell Thermostat Battery Be Replaced

A Honeywell thermostats battery should be replaced once a year, and you will receive warning 60 days before the battery expires. As a result, you have ample time to change the batteries, but there is a catch!

The thermostat features an LED panel that displays Low Batt or Replace the battery. This is the first notification you receive, which is likely 60 days before your battery dies. However, another warning is the black screen, which causes your thermostat to cease operating.

You may have a thermostat that merely utilizes a battery as a backup, and you may not be concerned about updating the thermostats batteries.

But believe me, even if your thermostat uses a battery for the backup process but you still need to replace the battery as this might cause certain changes in the Time and Date settings of the Honeywell thermostat.

How Much Does It Cost To Replace A Thermostat In Your House

How To Change Battery In Honeywell Thermostat Th8321Wf1001 / Replace ...

Installing or replacing a thermostat in a conventional 2,000-square-foot house costs between $113 and $254, including the cost of the device and expert installation. The average cost in the United States is $175. Depending on the kind and functionality, the thermostat will cost anywhere from $15 to $300.

Read Also: Invicta Watch Battery Replacement Chart

Read Also: Replacement Batteries For Nissan Leaf

How To Change Battery In Honeywell Touchscreen Thermostat

To replace the batteries in a Honeywell thermostat, follow these steps: Circuit breakers should be turned off. Remove the baseplates battery compartment. Get rid of the old batteries. Batteries must be replaced. The battery compartment should now be attached to the baseplate. Circuit breakers should be turned on.

Similarly, How do you change the battery in a Honeywell touch screen thermostat?

To replace the batteries in a Honeywell thermostat, follow these steps: Circuit breakers should be turned off. Remove the baseplates battery compartment. Get rid of the old batteries. Batteries must be replaced. The battery compartment should now be attached to the baseplate. Circuit breakers should be turned on.

Also, it is asked, Why has my Honeywell thermostat gone blank?

If you have a Honeywell thermostat, the blank screen might indicate that the furnace door isnt entirely shut. These thermostats are set to turn off completely if the furnace door is left open. Double-check that your furnace door is firmly closed to rule this out.

Secondly, How do you reset the battery on a Honeywell thermostat?

How to Reset a Honeywell Thermostat Remove the batteries and turn off the thermostat. Negative to positive and positive to negative are the inappropriate ways to put the batteries in. Wait 10 seconds before replacing them in the proper order. The factory settings for your thermostat will be restored.

Also, Does the Honeywell thermostat have a battery?

Related Questions and Answers

How To Reset The Thermostat

After changing the battery of your honeywell thermostat, you may consider resetting the whole system.

While this is not always necessary, there are various situations and scenarios that may motivate you to do the reset. They include

-Inaccurate regulation by the thermostat.: If the thermostat is not able to regulate the temperature correctly, you may want to reset it so that it can regulate it correctly.

-Inaccurate temperature display on the thermostat: If the thermostats display is not accurate, you may want to reset it so that it displays an accurate temperature.

-Corrupted data and time: If your date and time on your thermostat are incorrect, you may want to reset it so that you can have the correct date and time on your thermostat.

-Improper function of some of its functions: If some of your Honeywell thermostats functions are malfunctioning, you may want to reset them so that they will work properly again.

Read Also: Something Is Draining My Car Battery

S To Find The Model Number On The Back Of The Model

  • The first and foremost thing that you should keep in mind is to remove it from the electric socket. Keeping it connected to a source of electricity increases the chances of you being exposed to live wire which can give you a fatal shock.
  • The second step is to slide over the device off the base cover. Once it has been separated, you will find the model number written on the back of the device.
  • Once you are done noting the number, slide it back into the base cover and put it back in its original place. Your work here is done.
  • In case you cannot find the model number of your thermostat in any of these three places then there is only one option left. Check out the box or the user-manual that came with it for the model number. You will surely find it there.

    You May Like: 100 Watt Solar Panel Kit With Battery And Inverter

    Some Things To Remember While Replacing Your Honeywell Thermostat Battery

    Honeywell Pro Series Thermostat Battery Replacement (BATT)

    People face a common issue while replacing batteries breaking the delicate plastic parts by forcing them in or out.

    The contacts between the cover plate and base plate are especially fragile.

    Gluing broken plastic back together is a pain, so take extra care while replacing the batteries.

    Also, be careful and ensure your device is not connected to a live wire while you mess with it.

    This can damage your device due to surge voltage or arc formation at contacts.

    You could even give yourself an electric shock if you arent careful. To be on the safe side, Cut off power to the thermostat before trying to get at its insides.

    Read Also: Battery Replacement At Apple Store

    Series 2000 & 1000 Honeywell Thermostat Battery Replacement

    The 2000 and 1000 series are budget Thermostats from Honeywell. Mostly these thermostats are used in big complexes and apartments.

    The thermostats have LED display and can be used with air conditioner and gas furnace.

    Overall, if you are on budget and dont want to compromise on the quality, you can go for the above models.

    • Like all other models, this model also needs to be switched Off first.
    • Now, take out the cover plate from the base plate. You have to pull it from the bottom of the plate.
    • Replace the batteries. It contains 2 AA batteries. Make sure to check the polarity of the battery .
    • Put the cover back to the base plate.
    • Now, Switch on the Thermostat.

    Gopro Hero 11 Mini Design

    The most notable thing about the GoPro Hero 11 Mini is its lack of a large, rear display. The camera is controlled entirely using the power and record buttons, as well as voice control. Instead of a screen, the Hero 11 Mini features a large heat sink on its rear, as well as a second mounting bracket.

    My only major complaint with the GoPro Hero 11 Mini is that it doesnt feature a removable battery. I fully understand why this decision was made, as a replaceable battery would no doubt have meant increasing the size of the Hero 11 Mini. However, it does limit the life span of the camera, and if something goes wrong with the battery, then the entire device is toast.

    Read Also: Car Battery Won T Charge

    You May Like: What To Do When Battery Dies

    Honeywell Thermostat 4000 Series

    The Honeywell Thermostat 4000 Series uses an upgraded LED display for control to set desired temperatures, control the fan, and more.

    The 4000 Series includes the TH4210D and TH4110D models.

    Follow these steps to change the Honeywell 4000 thermostat batteries:

  • Turn off the thermostat and turn the power off going to the circuit.
  • Remove the old AA batteries and replace them with new AA batteries.
  • Make sure the positive and negative polarities match up.
  • Slide the cover plate back onto the base plate.
  • Turn the thermostat and circuit power back on.
  • The battery replacement is now done.
  • The Faceplate Or Battery Compartment/tray Has Not Been Replaced Correctly

    How To Change Battery In Honeywell Thermostat Rth6580Wf / Vintage ...

    When troubleshooting a thermostat that is not working after the batteries have been replaced, you should always start by checking whether the faceplate or the battery compartment lid or tray has been put back correctly on the control panel. For the thermostat to turn on, the pins in the control panel have to make proper contact with the baseplate.

    If youve found that the faceplate or battery tray has not been fitted correctly, remove everything and put it back correctly. This could be the solution to the problem.

    Read Also: Replacing Battery In Audi Key Fob

    Change A Honeywell Thermostat Battery In 6 Easy Steps

    How to Change a Honeywell Thermostats Batteries

    Are the batteries in your Honeywell thermostat flat? Dont worry, you wont have to put up with being stuck in the cold for much longer. This article will show you a step-by-step guide to changing the batteries.

    To change the batteries on a Honeywell thermostat:

  • Turn the power off at the circuit breakers
  • Remove the battery compartment from the baseplate
  • Remove the old batteries
  • Replace the battery compartment to the baseplate
  • Turn the power on at the circuit breakers
  • Changing the batteries on your Honeywell thermostat is a really easy job to do. In fact, it wouldnt surprise me if it turns out to be one of the quickest jobs you do today.

    Fancy looking at some of the above-mentioned steps in more detail? Then make sure you check out the Honeywell thermostat battery guide below. Youll even find a handy video tutorial.

    Honeywell Thermostat 3000 Series

    The Honeywell 3000 Series Thermostats include the TH3110D1008 and TH3210D1004 models.

    They might need to have their batteries replaced once a year. There will be an alert notification 2 months before the battery will run out of power.

    This series has a built-in compressor protection function that sets it apart from others. This feature protects your air conditioning and heating system from damage. It also has a display screen as the control system.Follow these steps to change the Honeywell 3000 thermostat batteries:

  • Turn off the thermostat and be sure to turn the power off going to the circuit.
  • Remove the old batteries and replace them with new batteries.
  • Make sure the positive and negative polarities match up.
  • Put the cover plate back over the base plate.
  • Turn the thermostat and circuit power back on.
  • The battery replacement is now done.
  • You May Like: Edison At The Battery Apartments

    Gopro Hero 11 Mini Price And Availability

    As with other GoPro cameras, the price of the Hero 11 Mini is highly dependent on whether or not you opt to buy into the GoPro subscription service. Its available now, with an MSRP of $450. However, with a subscription, that price comes down to a much more reasonable $300. The subscription costs $50 per year, bringing the total cost of the Hero 11 Mini down to $350.

    That works out to $100 less than the Hero 11 Black, which, given its many similar capabilities, makes the Mini something of a bargain. The Mini is roughly the same price as the DJI Action 2, which is even smaller, though it lacks many of the capabilities of the Hero 11 Mini. The Insta360 Go 2 is another tiny action camera. Its smaller, and it costs less than either the GoPro or the DJI, but it is severely limited compared to either.

    Dont Miss: Battery Power Generator For Home

    Replace All Honeywell Thermostat Model Batteries

    Honeywell thermostat battery replacement if thermostat doesn’t work AC won’t turn on

    Honeywell thermostats are pure blessings for us and no wonder why people love them so much. Having the temperature right under control is one of the primary pillars of comfort and Honeywell thermostats take care of that perfectly well.

    With its huge variety, starting from the ones with room temperature sensors to the brand new wifi-enabled model, these thermostats have been massively gaining popularity in recent times. But with a variety of models comes confusion about when and how you should change the batteries.

    Well, if you have a similar question then you do not have to worry anymore because will take you through the entire process, starting from how to understand when it is time to change the batteries to the actual process of changing the batteries. Yes readers, today we are going to talk about Honeywell thermostats replacing batteries and everything related to it.

    Let us Begin.

    You May Like: How To Replace Phone Battery

    How Do You Know If Your Honeywell Thermostat Is Bad

    Your thermostat is not responding to your changes: As you modify the temperature, it does not switch on your HVAC systems, and the display does not change when you touch buttons. Your air conditioner wont turn on: Defects in the thermostats wiring might cause the signals it transmits to your HVAC system to be disrupted.

    Honeywell 5000 And 6000 Series

    For Honeywell 5000 and 6000 series such as the TH5000, TH6110D, and TH6320U, replace the battery by:

    • Pushing down the top right side of the thermostat and sliding it to the right
    • The battery holder should come off
    • Insert the new batteries and return the holder by sliding it back in position

    Take the shortest time possible to replace your Honeywell thermostats batteries as it will reset if they arent inserted within 2 minutes.

    Also Check: Macbook Pro Retina 15 Inch Mid 2015 Battery Replacement

    Remove The Battery Compartment From The Baseplate

    This step will change depending on the model of your Honeywell thermostat. Take a look at the table below that will show you the step that is right for your model.

    Basic Pull Design Hinge Design
  • If your thermostat has a basic pull design, put one hand on either side of the faceplate.
  • Pull and wiggle on the faceplate to tease it away from the baseplate.
  • If your thermostat has a hinge design, place your thumbs under the thermostat and your fingers on the top.
  • Pull from the bottom upwards to unhook the faceplate from the baseplates hinges.
  • How Does A Honeywell Thermostat Work

    How To Change Battery In Honeywell Thermostat Th5110d1006

    A honeywell thermostat works by turning on or off its fan depending on the temperature of the room.

    When the temperature gets too low, it turns on its fan to heat up the air inside your house, and when it gets too high, it turns off its fan so as not to cool down your house unnecessarily.

    Where is a honeywell thermostat installed?

    A honeywell thermostat can be installed on a wall. It regulates the flow of air inside your house.

    Also Check: 2016 Ford Escape Battery Replacement

    Changing A Honeywell Thermostats Batteries

    The process of changing a battery in one of these thermostats is simple enough, but if youre new to it, it can be a challenge.

    The first thing you are going to have to do is locate where the battery is in the device.

    Since all the Honeywell thermostats that use batteries store them in the control panel, you can start by figuring out what that is.

    Youll notice that it is the main part of the device simple enough!

    Find the cover or the battery compartment tray, and carefully remove it the batteries should be in there.

    Youll have to remove the thermostats faceplate to get to these areas, so just work carefully.

    Once you find the batteries, all you need to do is remove them, noting which direction each one is facing, and replace them.

    The thermostat wont work if you place the batteries at the incorrect orientation.

    If you have no functioning control unit, the rest of the system wont work.

    Keep your operating system running with those batteries, and you can have full access to the thermostat.

    As a result of this, its important to change out the batteries fairly regularly.

    You will probably be able to tell when the batteries need to be replaced.

    Honeywells thermostats that use batteries will always use either AA or AAA batteries.

    The battery size will depend on the model you have maybe your thermostat doesnt even use batteries!

    There are models that will draw power from the main electrical supply, so theres no need for batteries.

    How Do I Change My The Batteries In My Thermostat

    Equipment | Home Automation | Thermostat

    To change the batteries on your Z-Wave smart thermostat, please watch this quick video:

    If this isnt your thermostat, the steps to changing the batteries may be different:

    • In most 2GiG thermostats , the bottom or top portion of the thermostat will slide off the faceplate to reveal the battery compartment.
    • If you have a Honeywell thermostat, on most models, press around the edges of the faceplate to loosen the thermostat from the mounting plate. Then pull the thermostat away from the wall. You will see the batteries located on the back of the thermostat.

    If you are unsure on what model of thermostat you have, or none of the above instructions match what is installed in your home, please give us a call at 1.800.PROTECT .

    You May Like: Cost To Replace Macbook Battery

    Related Posts