Changing Subaru Key Fob Battery

Share This Post

How To Change The Battery Of A Honda Key Fob

Subaru Key Fob Battery Replacement ( Keyless Entry Trick) Cars Simplified

To replace the battery of a Honda key fob, ensure you first buy a replacement CR2025 battery. It will cost you between $2-4 dollars for a pair of batteries.

  • Slide the button to release the physical key
  • Pry the key fob open into two halves using a finger or screwdriver at the seams
  • Pop out the old battery and replace it with the new one
  • Take care to insert the new battery in the same orientation as before, with the correct and signs in place.
  • Test the battery for any issues and ensure it is in proper working condition

Why Wont My Key Fob Work After I Changed The Battery

There may be broken contacts or the buttons of the fob are misaligned. Other reasons may contribute to your fob not working after replacing the battery.

Get in touch with your mechanic if you cant figure out the cause of the problem. Your car requires troubleshooting, which helps in discovering its actual problem.

Can You Replace A Key Fob Battery Yourself

You can replace the battery in your key fob by following these steps:

  • Find out the type of battery used: This will be embossed on the side of the fob. The most commonly used type of battery is button cells, sold by brands like Duracell and Energizer.
  • Open the key fob at the seam: Most key fobs are made of two halves that join together at a seam. You can easily split them apart by using a finger or sharp edge against the notch.
  • Take out the old battery and replace it with a new one: The button cell battery will look like a little silver coin. Pop out the old one and pop in the new one the same way. Take care to insert it in the same orientation .
  • Snap the fob halves back in place and test it: Check whether the lock/unlock and start functions are working properly to ensure youve replaced the battery correctly.
  • Don’t Miss: Charge Car Battery How Long

    Signs You Need To Replace Your Key Fob Battery

    If your key fob is starting to work intermittently, that’s a good sign the battery is dying. If you have to press the lock/unlock button multiple times to get it to work, then chances are your battery will need to be replaced soon. Of course, if your key fob has completely stopped working, the battery is most likely dead.

    When You Hear A Click Take Out The Dead Battery And Replace It With A Fresh New Cr2032 Battery

    How To Change Battery In Key Fob Subaru 2021
    • Turn over the fob, and youll see three screws. Remove them with a Phillips-head screwdriver or an appropriately sized flathead screwdriver. If you cant find your own tools, the local hardware store will have them for sale .
    • Once all three screws have been removed from one side of the fob, gently pry apart its halvesbut be careful not to bend anything! You should now be able to see where its battery lives as well as some important components like a small circuit board and an antenna wire that connects it with other parts of your car .
    • Unfortunately for us humans who arent super strong robots yet, our fingers are too big to fit inside this tiny space where we need them most! Luckily there are solutions if you dont have any mechanical experience whatsoever but still want something more substantial than using just your hands alone then consider buying some needle-nose pliers online before going forward because once again Amazon has everything under every sun imaginable so no worries at all there either way its always good practice before starting anything new anyway especially when dealing with electricity because safety first guys!

    Also Check: Ipad Pro Battery Replacement Cost

    Troubleshoots In Changing Battery In A Subaru Key Fob

    The process of troubleshooting when changing the battery in a Subaru key fob may slightly vary depending on the model and year of your vehicle. In general, though, you can follow these steps to change the battery in your Subaru key fob. Begin by finding the release button or tab on your key fob. This is typically located near the key ring.

    Once you have found the release button, press it to open your key fob. Next, locate the battery inside your key fob. There are usually two batteries in a Subaru key fob, so make sure you replace both batteries at the same time.

    Once you have located the batteries, use a small screwdriver or coin to pry them out of their compartment. Then, insert new batteries into the compartment, making sure they are facing the correct way. Finally, close your key fob and test it to make sure it is working properly. If your key fob still isnt working after changing the batteries, contact a professional for further assistance.

    Read Also: Lithium Batteries In Smoke Detectors

    How To Change The Battery In A Subaru Key Fob

    CR2032 3V and CR2025 3V batteries are common replacements for Subaru key fob batteries. There are various varieties to utilize, but it is critical to consult your cars handbook to determine the best battery type for your fob.

    Similarly, What battery goes in a Subaru key fob?

    CR2032 3V and CR2025 3V batteries are common replacements for Subaru key fob batteries. There are various varieties to utilize, but it is critical to consult your cars handbook to determine the best battery type for your fob.

    Also, it is asked, How do you change the battery in a 2018 Subaru key fob?

    To access the fob, remove the glove box key by pressing the silver button and using it to push open a tiny hole that is disclosed. The battery may then be removed and replaced from there. Easy as pie!

    Secondly, How do you open an old Subaru key fob?

    Subaru Key Fobs from the past Look for a little gap between the front and rear of the key fob in the seam. With a little flathead screwdriver, pry the key fob open. Remove the old battery and replace it with the new 2025 battery. Make sure the new battery is facing the same way as the old one.

    Also, Can you start Subaru without key fob?

    Registered. In the event that the fob fails, the automobile can give electricity. You must push and hold the button for a few seconds before pressing START.

    People also ask, What kind of battery does 2018 Subaru key fob take?

    3V Lithium CR2032 Battery

    Related Questions and Answers

    You May Like: Emergency Exit Lights With Battery Backup

    What Happens If Your Car Key Battery Dies

    The key fob battery is an integral part of a car key. The battery powers the key and operates the remote function. With push-to-start vehicles, the key is necessary to power up the car in order to use it. As such, a dead battery can prevent your car from starting.

    If your battery dies, you can change it. You can do this yourself or reach out to a professional.

    Most smart keys are equipped with an emergency blade . An emergency blade is a mechanical key placed inside the fob. Its used to open the drivers side door in an emergency .

    Battery Place Near Me

    How to Replace a Subaru XV Crosstrek Key Fob Battery

    With over 700 stores throughout the United States and Puerto Rico, theres sure to be a Batteries Plus Bulbs nearby. Stop in today for the best selection of energy and lighting products. Be sure to ask about how to save your business time and money by opening up a commercial account. Our experts are always on hand to answer your questions and help you find exactly what you need.

    *Smart home & key services vary by location check your nearest store for eligibility.

    Also Check: Dyson V7 Animal Battery Replacement

    Read Also: Dead Car Battery Or Alternator

    When To Replace Your Key Fob Battery

    How long your key fob battery lasts depends on several factors such as how often you use it, your climate, and if the battery has been replaced before. A new key fob battery should, on average last a few years before you need to replace it. If you recently replaced your key fob battery and the key fob is still not working correctly, the problem is likely with the key fob itself.

    Lift Out The Control Module

    After successful separation of the housing, the control module accommodating the battery will stare at you.

    It will be located in one of the two housings. Remove the module gently so that removing the battery will be a piece of cake.

    It is advisable to mark the housing that accommodates the control module so that putting it back will not be difficult.

    Dont Miss: Where Can I Recycle Car Batteries

    Don’t Miss: Apc Battery Backup Battery Replacement

    S To Replace Subaru Key Fob Battery

    The Subaru key fob is usually sealed tight to prevent water from getting in and causing short circuit which will ruin the fob. The battery is tightly secured to ensure the fob works even when you are moving or you are in a place with vibration.

    In some instances, the key fob will need to be reprogrammed after battery change.

    Step 1: Unscrew the screw holding the two parts together. Use the right screwdriver to avoid damage to the screw or the fob casing.

    Step 2: The battery is usually held by a plastic casing that is hooked to the control system via hooks. Carefully release the clippings that hold the casing to the control system.

    Step 3: The metal contacts that form the circuitry further holds the battery down and you may need to tap it softly to release the battery.

    Step 4: Replace the old battery with the new one and ensure that the battery faces the same side as the old battery.

    Step 5: Insert the plastic casing back and ensure all the clippings are properly locked in place.

    Step 6: Put the other outer cover of the key fob back and tighten the screw. Make sure the screw is tight to ensure that dust and water does not sip into the key fob.

    Your Battery Begins To Run Out Of Power

    How To Change Car Key Battery Subaru : Toyota Key Fob Replacement ...

    If you notice that your keys are not responding as quickly, or at all, to your commands and press the buttons over and over again with no change, then it is time for a new battery. A dead key fob is an indicator that there is a problem with the battery.

    You can replace your Subaru key fob battery yourself if you have some basic knowledge of car parts. You can get replacement batteries at any auto parts store for less than $5-$20 depending on the quality of the battery.

    Don’t Miss: Test Car Battery With Multimeter

    Subaru How To: How To Change The Battery In Your New Generation Subaru Key Fob Also: How To Fix The Most Common Mistakes To Save You From Needing To Buy A New Keyfob Case

    Heres how to change the battery in your New Generation Denso Made Subaru key FOB.

    USE THE CHAPTERS TO SKIP TO THE PARTS YOU NEED.

    I go into detail showing how to change the battery, how to avoid popping out the spring, how to put the spring back in, if you pop it off, and just about every other mistake, so you dont make them, or can learn how to fix them.

    Dont Miss: Tesla Model 3 Battery Cost

    Pros Of Having A Subaru Key Fob

    We only realize the worth of something when we lose it or it fails to function, and your vehicle key fob is no exception. This handy device saves us time and adds to our everyday convenience.

    But as with other gadgets, it may run into problems. However, you can fix the issue by replacing the battery, purchasing a new fob, or contacting a locksmith for repairs.

    Lets see what a key fob deprives you of when it ceases to function optimally.

    • Security. It helps you keep your car secure by locking all the doors accessibly. You do not need to reach closer to your vehicle for the purpose. Instead, you can operate it remotely as long as youre in range. Plus, a few models feature a code architecture as an additional security measure you can share it with your family or friends.
    • Operating sound. If you parked your car in a crowded parking lot, it isnt uncommon for you to forget the precise location. Luckily, as you tap the key fob, your vehicle will produce a beeping sound thatll help you spot it even in a crowded place.
    • Control vehicle on the go. You do not necessarily need to reach your vehicle to control it. Instead, you can use the Subaru key fob to control your car from your bag, purse, or pocket.
    • Smart start system. A few models feature a start system that allows you to sit inside your car and start the ignition as quickly as opening the car doors and windows.

    Read Also: Where To Get Battery Replaced Car

    Lets Welcome Rusty To The Team

    The HogWatch team is excited to announce our new partner, the Nascar legend Rusty Wallace! Rusty is a racing icon, public speaker, and member of the the NASCAR Hall of Fame. We are looking forward to partnering with him for events, commercials, and more! Stay tuned for upcoming appearances by Rusty at an event near you.

    Remove The Mechanical Key

    Subaru Forester Key Fob Battery Replacement (2016 – 2021)

    The first thing you need to do is to remove the mechanical key. There is a button at the back of the fob, press the button with your thumb to take off the mechanical key.

    If your thumb is too big and cannot enter the small groove accommodating the button, you can use a screwdriver to press the button.

    While pressing the button with one hand, use the other hand to remove the mechanical key.

    You May Like: How Many Amps Car Battery

    Why Does My Key Fob Not Work After Replacing Battery

    To open the key fob and inspect for damaged contacts or misaligned buttons, you may use basic tools. Replace the automobile key fob if that doesnt work. Another reason your vehicle remote may not function after replacing the battery is the lock. Check for these symptoms to see whether the lock or vehicle door has become faulty.

    Then Put Back On The Cover Plate And Test Out Your Remote By Closing And Opening Vehicle Doors From Afar

    The cover plate should snap back into place and lock, but if it doesnt, try flipping it over and pressing down from the other side. If that still doesnt work, contact your dealership for help.

    Now test out your remote by closing and opening vehicle doors from afar. If youre having trouble getting the remote to work properly after changing the battery, contact your local dealership for assistance.

    Also Check: How To Change Battery For Mercedes Key

    How To Remove The Old Battery From The Subaru Key Fob

    Be careful when performing this battery replacement as the circuit board is fragile and easily damaged. quality screwdrivers are essential to prevent stripping screws. Subaru uses a very small Torx security bit in the key fob. The first step is to lift the small plastic cover off of the back of the key fob.

    There are 2 T6 Torx screws holding it in place. Once these are removed, you can carefully separate the halves of the key fob by prying them apart with a small flathead screwdriver. With the key fob open, you can see the battery and circuit board. The old battery will be soldered onto the circuit board and will need to be desoldered before removing it.

    Once the old battery is removed, you can install the new one by soldering it onto the circuit board. Finally, reattach the two halves of the key fob together and screw in the two T6 Torx screws. Congratulations, you have now successfully replaced the battery in your Subaru key fob!

    Reach Out To The Dealer

    2012 subaru impreza key fob battery

    If its been 5 years since you bought your car, we recommend reaching out to the dealer for a key fob battery replacement. Why? Because an aftermarket fob might not function with your vehicle.

    Yes, you can program a few fobs, but they follow up with risks.

    Generally, removing the mechanical key and programming the fob will take around an hour.

    If you can afford to pay for an aftermarket fob, a dealer can adjust it for you. But, it is pretty risky and not advised by pros.

    Don’t Miss: Replacing Battery Toyota Key Fob

    How To Install The New Battery In The Key Fob

    Spring is here and along with it, warmer weather! Warmer weather means more time spent outside, and more time spent outside means your car key fob battery is going to die sooner. So, today were going to show you how to install the new battery in the key fob. To start, youll need a flathead screwdriver.

    With the screwdriver, pop opens the back of the key fob. Once the back is open, youll see the battery. Using the screwdriver, carefully pry the old battery out and dispose of it properly. Take the new battery and insert it into the key fob, being careful to line up the positive and negative sides correctly.

    Once the new battery is in place, close up the back of the key fob with the screwdriver. And thats it! Youve now successfully installed a new battery in your key fob. Thanks for following along and feel free to leave any questions in the comments below.

    How Much Does It Cost To Replace A Key Fob

    Theres no simple answer, but few modern key fobs are inexpensive. Even basic remotes may require special programming with computer software only accessible by a dealership.

    Though the repair wont take more than a few minutes to replace, this can get expensive.

    Kelley Blue Book contacted dealerships across the country for replacement costs of key fobs for some popular and high-end models. Quotes we got for replacing key fobs for a 2020 Subaru Forester with a push-button start ranged from about $200 to $400. A 2020 Toyota Sienna fob was about the same. However, dealers quoted as little as $150 to replace a 2017 Honda Accord key fob.

    Several BMW dealers said that the more advanced security features embedded in the fob for a 2020 X5 justify the roughly $500 they charge to replace and program one. If you think thats a lot, consider that the crystal fob Aston Martin included with some of its models might cost $2,000 to replace and reprogram.

    Recommended Reading: 36 Volt Lithium Trolling Motor Battery Reviews

    Related Posts