How To Change Battery On Ring Doorbell

Share This Post

How To Charge Your Ring Doorbell

How to replace and charge Ring Video Doorbell 2 battery DIY video | #diy #ring

Batteries on the Ring doorbell and Ring doorbell 2 are charged using a regular micro-USB cable. Each new doorbell comes with an orange cable, but any micro-USB will work just as well.

1. Unscrew the screw at the bottom of the doorbells mount to remove the Rings faceplate.

2. Lift the faceplate away from the rest of the doorbell.

  • If you have the original Ring doorbell, there will only be one screw at the bottom, and you will be removing the whole doorbell from the wall mount, not just the faceplate. Skip to step 3.

3. Press the release tab to remove the battery.

4. Plug the battery into the charger and let it sit until its fully charged.

  • Ring doorbells take anywhere between five to ten hours to fully charge. The length of charge time depends on whether the USB is plugged into a wall or a USB port if its plugged into the wall, it will charge faster.
  • You will know your doorbell is done charging when the charge indicator on the battery becomes green on the Ring Doorbell 2, or blue on the original Ring Doorbell.

5. When its fully charged, re-mount your doorbell and screw it back into the wall.

Wait about thirty seconds for the doorbell to turn on, then press the button so that the battery life updates on the app.

Dont Miss: Battery Light On In Car

Opening The Blink Video Doorbell Case

To remove the doorbell from its back plate, use the Opening Key that came taped to the paper template in the product box. If you need another key, contact Blink support.

Opening KeyPut the key into the opening at the base of the Blink Video Doorbell.

If your doorbell has a battery cover, then removing it from the back plate is done by pressing the key straight into the slot until the grey catch is released.

If your doorbell has an open battery compartment, the latch is opened by pulling the key toward you slightly. When released, slide the doorbell up while pivoting away from the back plate.

Inside the battery case you can find the QR code and corresponding Device Serial Number , the reset button, and a diagram shows the correct position to insert new batteries.There are two types of doorbell design. One has an open battery bay, the second has a weather protective battery cover. Both are shown below.

Type 1 Type 2Battery cover removed

If your doorbell has the weather protective battery cover, keep it safe when you change batteries, because the door is important for proper function.Open battery cover: Press the grey release button to open, then lift the door, to remove.Replace battery cover: Insert tabs of the door into the slots near terminal screws.Close battery cover: Complete closing the door and press until a click confirms it is secure.

Reconnecting the doorbell

Press the doorbell button to test it.

Why Is My Ring Doorbell Showing Low Battery When Hardwired

It is possible that the battery may not be charging if the wires used are corroded, loose screws, the power supply is affected due to cold weather, or if it isnt receiving enough voltage .

To diagnose this issue: Go to the Ring app Device name Device health Device details Under Power Source if it shows battery then there may be something wrong with the wiring or mounting bracket.

Don’t Miss: Off Grid Lithium Battery Bank

The Bell Should Be Reset

When all of the other options have failed you, try tapping the reset option. This allows the gadget to reboot automatically on its schedule. Leave it a minute or 2, and you should notice a difference.

To perform a hard reset on the Ring Doorbell, take these steps:

a. Remove the doorbell from its mounting.b. Then, find and click on the Ring app on your smartphonec. Further, click on the menu and choose your gadget from the list of options.d. Press on the gadget health and alter the WIFI connectione. For roughly ten secs, click and press the orange switch , then leave.f. Reconnect to the doorbell again and connect it with your Wi-Fi network.g. Press and hold the orange switch in order to enter Setup Mode.

How To Change Ring Doorbell Battery In 5 Steps

Replacement Battery For Ring Video Doorbell 2 Spotlight Camera Stick Up ...

The Ring Video Doorbell is a powerful smart security camera that has both the features of a surveillance camera and the convenience of a traditional doorbell.

The Ring Doorbell has a motion sensor that allows it to send real-time notifications to your smartphone when someone is at your front door.

It also has a two-way audio communication feature that lets you talk to your visitors even when you’re away.

The Ring Video Doorbell comes in two variants: the wired version and the battery-powered one.

We already discussed how to install a Ring Video Doorbell Wired in our previous blog.

In this blog, we’ll talk about how to change the Ring Video Doorbell battery.

Read Also: Battery Weed Eaters At Lowes

How To Replace Ring Doorbell Battery

Similarly, Can Ring battery be replaced?

You dont have to purchase a new one, thankfully. The 6,000mAh device is rechargeable, and the whole procedure just takes a few hours. Unfortunately, there is no way to reach the battery from the Ring devices exterior shell, so youll have to remove the faceplate to do so.

Also, it is asked, Does ring doorbell have removable battery?

A rechargeable battery is included with your Ring Video Doorbell 2. Make sure your battery is completely charged before you finish your installation. The procedure for removing and charging your Ring Video Doorbell 2 battery is shown in the video below.

Secondly, Do ring doorbell batteries need to be replaced?

If youve had your Ring Video Doorbell or Ring Stick Up Cam for a long time and the battery no longer holds a charge, its time to replace it.

Also, What kind of batteries does Ring use?

Ring contact sensors first version utilized CR123A batteries, whereas the second generation utilizes CR2032 coin cell batteries. These batteries should be changed every three years on average.

People also ask, What kind of batteries does a ring doorbell take?

Battery is compatible with Ring-doorbell for Video Doorbell 2/3 and Spotlight Cam Battery 6040mAh and is rechargeable at 3.65V.

Related Questions and Answers

Battery Features & Lifespan

Ring Video Doorbells use a rechargeable lithium-ion battery that comes with the purchase of the device. You can still buy a second battery as a backup power to help maintain the continuous use of your Ring Device when the main battery is charging.

The battery is charged with a micro USB charger. The first and second generation Ring Doorbell use a built-in battery, so you’ll have to remove the whole device from the mounting bracket to charge it.

Ring Video Doorbell 2, 3, 3 Plus, and the Peephole Cam are equipped with a quick release battery pack, so you don’t have to remove the whole device to charge it.

The Ring Doorbell’s battery life typically lasts between 6 to 12 months with normal use. This will still depend on how you use the device. If its motion detection is constantly on, the battery will drain faster.

You will receive a notification on your phone when your Ring Doorbell’s battery needs a recharge. Make sure to fully charge the battery before it completely dies, or you’ll have to set it up in your Ring app again.

Recommended Reading: Apc Battery Backup Battery Replacement

Remove The Security Screw

When you first unpacked your Ring Doorbell, you probably noticed a curious-looking screwdriver, with a star-shaped end. Well, the security screw is the first thing that you need to remove in order to take the faceplate off and this can only be done using the provided screwdriver. Obviously, this was done for security purposes, so dont try and use third-party tools and methods to remove the screw, as you may only end up damaging it.

Simply insert the star-shaped end of the screwdriver into the screw and start turning it counterclockwise, until its loose. Note: the faceplate will still remain tightly in place, even when you take the screw out.

Charge Your Adt Doorbell

Ring Doorbell (First Gen) Battery Replacement #KA6WKE #REPAIR #RING

Now that your ADT doorbell has been removed from its bracket and you have access to the battery, you can charge the battery. Your ADT Doorbell has a micro USB port built-in for easy charging. ADT sends a micro USB charging cable with every battery-powered doorbell, but any micro USB cord will work.

It can take six to eight hours to charge your ADT Doorbell, so be aware that your doorbell camera wont be functional during this time. It is best to charge your ADT Doorbell when you are home and dont need the camera to be functioning.

Don’t Miss: Stihl Battery Weed Eater Reviews

How To Charge A Ring Doorbell

  • Remove the battery from the bottom of the Ring doorbell.
  • Plug the Ring doorbell battery to a power source using the orange USB cable. The battery will be fully charged if the light on top turns green, and there is no orange light.
  • Insert the battery back into the Ring device.
  • The battery should last at least 6 months,depending on how often the doorbell is used. To avoid downtime, you canpurchase a 2nd battery to keep as a replacement.

    Dont Miss: How To Optimize Iphone Battery

    Make Your Home Smarter

    If youre having issues with your Ring doorbell not charging, one of the fixes above should help to fix it. A Ring doorbell is a simple but effective way to make your home smarter, allowing you to answer your door even when youre away from home.

    There are plenty of other ways you can use smart tech in your home. One of the simplest ways to make any device smart is by using smart plugs combined with a voice assistant.

    Why not let smart watering systems look after your lawn for you? You can even get smartphone-controlled bathtubs, so your bath is ready the moment you walk in the door.

    Recommended Reading: Car Battery Delivery And Install

    Getting The Battery Out

  • 1Remove the security screw at the bottom of the faceplate. Use the provided Ring screwdriver to loosen the screw at the bottom of the cover by turning it counterclockwise. Take out the screw and set it aside.XResearch source
  • If you ever lose the security screw or the Ring screwdriver, you can order replacements online from or by speaking with customer service via .
  • 2Use your thumbs as levers to push the faceplate up from the bottom. Put both your thumbs on the bottom of the faceplate and support the front with your index and middle fingers. Push up with your thumbs to pry the bottom of the faceplate free.XResearch source
  • This is only necessary if your Ring doorbell features a removable battery that you need to take out in order to charge. Other models have a port for the charging cable on the back, so itâs not necessary to remove the cover.
  • 3Take the faceplate off of the body when you have pried it loose. Carefully lift the faceplate away from the body. Set it aside somewhere safe.XResearch source
  • The faceplate will easily lift off once you have loosened the bottom with your thumbs. There is nothing else holding it onto the body. Be careful not to let go of the faceplate once you loosen the bottom edge or it might fall off and hit the ground.
  • Once the battery starts sliding out you can let go of the black tab. This is just the release button.
  • You can swap out the faceplate at this time if you want to put on a different color.
  • Access The Rechargeable Battery Pack


    The ADT battery-powered doorbell has a fully rechargeable battery pack attached. There is no need to remove the battery pack from your doorbell during the charging process, as the charging port is accessible while the battery is attached to the doorbell. This keeps the charging process simple, and you dont have to worry about how small parts or cords fit back together.

    You May Like: What Size Solar Panel To Charge 100ah Battery

    Check Your Ring Charger

    If your Ring doorbell isnt charging, the problem could simply be that your charger isnt working correctly.

    The simple way to test this is to try to charge something else with your charger. If this device charges as expected, then your charger isnt the problem.

    If youre unable to get the device to charge correctly, however, then you may need to replace your Ring charger.

    How To Charge Your Ring Doorbell Battery

    To charge your Ring doorbell, follow the steps as they’re listed below. You’ll be using a common micro-USB like the one that came with your device in the box, but instructions will vary by model.

    Before you get started, confirm your doorbell model using the Ring app, as it’s important to note certain details specific to your device:

    • Only the Ring Video Doorbell and Ring Video Doorbell are charged by removing the entire doorbell unit from the mount. All other doorbells haveremovable Quick Release Battery Packs under the faceplates.
    • If your battery-powered doorbell is hardwired or has a solar charger, it receives a trickle charge from those sources and may still need to have the battery charged.
    • If you don’t want to experience any downtime while charging the battery, spare batteries are available for purchase.

    First, Check Battery Charge in the Ring App

  • Tap the three lines on the top left of the Ring app.
  • Tap the doorbell you want to check.
  • Tap Power Settings.
  • Under Battery Status, you’ll see Battery Level.
  • Below Battery Status, you’ll see Feature Power Usage. Here, you can view and adjust any features that are affecting battery life to optimize your battery life.
  • Next, Charge Your Doorbell Battery

    Scroll down to the instructions for your doorbell model and follow the steps.

    Ring Video Doorbell and Ring Video Doorbell

  • Remove the security screws at the base of the doorbell and lift the doorbell up and away from the mounting bracket.
  • Ring Video Doorbell 2, 3, 3 Plus, and 4

    Don’t Miss: Best Battery Powered Weed Trimmer

    Original Ring Doorbell Battery Replacement

    Ive had this device since it originally came out, Whenever that was, lol. The battery is finally finished, is it possible to replace it? If so, does anyone have a part number or link to the replacement ?


    Hi @motoolfan. The Ring Video Doorbells battery is not removable. I recommend that you contact our support team at 1-800-656-1918 to discuss what options you have.

    I have seen several You Tube videos on replacement of Generation One Ring batteries. So Im pretty sure they can be replaced. NOW tell us where to get one please.

    Or if you would give us the specs for the batterythere are some refurbished ones on EBay but I would like to get a new one. There are many batteries that look similar on the net

    Hey @Heavysnacks. We do not recommend taking the battery out of the Ring Video Doorbell or the the Ring Video Doorbell 2nd Generation, as it is not a removable battery for recharging or replacing. Whenever the battery is no longer functioning as it should, we recommend contacting support to see if you can get the device troubleshooted to function again , or get the device replaced within warranty. Removing the battery on these devices can void the warranty, which you can learn more about here.

    If youre find your battery is not staying charged, please give our support team a call at one of the numbers available here

    I dont think @Ring understands the question. We CAN buy replacement batteries from hundreds of online websites or in stores.

    Why Does My Ring Doorbell Run Out Of Battery So Fast

    RING doorbell battery replacement

    Why is my Rings battery dying so quickly? A large number of motion events and alarms, live streaming, a poor Wi-Fi connection, and cold weather are the most common causes for a Ring battery to deplete rapidly. The rechargeable lithium batteries in the Ring should last six to one year before they need to be recharged.

    You May Like: Places To Buy Car Batteries

    What Drains The Battery Of My Ring Video Doorbell

    Ring Video Doorbells use lithium-ion battery packs, an extremely common type of cell that can be found in all kinds of indoor and outdoor devices. While a full battery charge should last several months without service, there are a few things that can affect the overall health of the battery.

    Temperature extremes are one of the major causes of rapid battery-drain, particularly the cold. In fact, during the winter months, you may find that you need to recharge your doorbells battery more frequently.

    Another factor is the amount of activity your doorbell is capturing on a daily basis. An active doorbell that is constantly triggered by motion happening on and around your property is going to be non-idle more than a doorbell in a relatively motion-free environment.

    If you want to see exactly what features are affecting the health of your doorbell battery, you can monitor and adjust certain Ring Video Doorbell capabilities under the Feature Power Usage tab in the Ring app .

    Editors Recommendations

    You May Like: Ev Battery Recycling Companies Stocks

    Why Is My Ring Doorbell Not Holding A Charge

    If your Ring doorbell isnt charging, make sure your Wi-Fi connection is strong and the charger or charging cord isnt broken. What exactly is this? Check the circuits in your home to discover whether a breaker has tripped. If the problem continues, your Ring doorbell battery may need to be replaced.

    Read Also: Change Battery In Smoke Detector

    Has Your Ring Video Doorbell Stopped Working It Could Be A Dead Battery

    We love our Ring Video Doorbell, but recently it stopped working. I forgot that the unit has a rechargeable lithium ion battery that needs to be recharged from time to time.

    The suggested battery life from the manufacturer is 6 to 12 months. While the unit is working you can check the battery charge on the Ring app. Once its dead, you will not be able to check the battery charge and will need to remove the battery and recharge it. This is how to remove, recharge and replace the Ring Video Doorbell rechargeable battery.

    Related Posts

    Surface Pro 8 Battery Life

    Microsoft Surface...

    Iphone 13 Pro Max Battery Life Hours

    Understanding Iphone...