How To Replace Battery On Honeywell Thermostat

Share This Post

Changing A Honeywell Thermostats Batteries

Honeywell Pro Series Thermostat Battery Replacement (BATT)

The process of changing a battery in one of these thermostats is simple enough, but if youre new to it, it can be a challenge.

The first thing you are going to have to do is locate where the battery is in the device.

Since all the Honeywell thermostats that use batteries store them in the control panel, you can start by figuring out what that is.

Youll notice that it is the main part of the device simple enough!

Find the cover or the battery compartment tray, and carefully remove it the batteries should be in there.

Youll have to remove the thermostats faceplate to get to these areas, so just work carefully.

Once you find the batteries, all you need to do is remove them, noting which direction each one is facing, and replace them.

The thermostat wont work if you place the batteries at the incorrect orientation.

If you have no functioning control unit, the rest of the system wont work.

Keep your operating system running with those batteries, and you can have full access to the thermostat.

As a result of this, its important to change out the batteries fairly regularly.

You will probably be able to tell when the batteries need to be replaced.

Honeywells thermostats that use batteries will always use either AA or AAA batteries.

The battery size will depend on the model you have maybe your thermostat doesnt even use batteries!

There are models that will draw power from the main electrical supply, so theres no need for batteries.

Why Is Everything Working After Replacing The Batteries But The Warning Indicator Is Still On

Although the battery indicator or low-battery message on the screen should disappear within a few minutes after youve replaced the batteries, it is not uncommon for the battery indicator to stay on even after youve replaced the batteries.

If the indicator stays on, the system may require a restart. With a restart, the indicator will be reset. If you have an advanced Honeywell model, you will be able to reset your thermostat by following the prompts and steps on the display menu.

Some advanced systems can even be reset by using the Honeywell smartphone app. However, to use this option, you must have a Wi-Fi-equipped thermostat system.

If your Honeywell thermostat does not have a reset option in the control panel menu, youll have to power it down completely by turning the thermostats circuit breaker off.

After all the power to the thermostat has been cut, remove the batteries from the thermostat control panel. Remove the batteries, even if they are the fresh batteries youve just put in. Wait for about two minutes and place the batteries back again and close the thermostat.

Then turn the circuit breaker on again. This procedure should have reset all the Honeywell thermostat systems and deactivated the low battery indicator.

How Much Does It Cost To Replace A Thermostat In Your House

Installing or replacing a thermostat in a conventional 2,000-square-foot house costs between $113 and $254, including the cost of the device and expert installation. The average cost in the United States is $175. Depending on the kind and functionality, the thermostat will cost anywhere from $15 to $300.

Read Also: Invicta Watch Battery Replacement Chart

Dont Forget To Check Your Warranty

One last important tip: It is also always a good idea to check your thermostats warranty before fixing or replacing anything. This is because you want to ensure that replacing the thermostats batteries is covered by the warranty.

Additionally, you will want to know if there are any actions you might take that would void your warranty if youre not careful. Consulting your warranty will give you a much better idea of what thermostat problems you can fix and which ones you should leave to qualified professionals.

Series 4000 Honeywell Thermostat Battery Replacement

Studioly: 15 How To Change Honeywell Pro Series Thermostat Battery 2022

The 4000 Series Honeywell Thermostats come with built in compressor protection system. The controls are also good and can be used to control temperature, fan speed, heating system etc.

The LED display lets you know of the battery condition, temperature, time and date and other important stats.

  • Switch off the Thermostat from the main circuit breaker so that you are not exposed to any live wire.
  • Remove the Cover plate. Push it from bottom.
  • Now, change the batteries with fresh ones.
  • Put the cover plate back to the base place. Place it firmly.
  • Now that batteries are replaced you can Turn on the Thermostat.

Also Check: Best Car Battery Brands 2021

Getting Your Thermostat To Work After Changing Its Battery

If your thermostat system is not working after you replaced the batteries, the batteries are likely to be in the wrong direction.

Any batteries in the wrong orientation will result in the system not working.

The other possibilities would be that the faceplate has been put back in correctly, the batteries you put in are faulty, or the system needs to be restarted.

What Kind Of Battery Is Used By Honeywell Thermostat

To replace the battery in a Honeywell thermostat, you first have to know what kind of battery is necessary.

Nowadays, AAA batteries are required for the majority of Honeywell Thermostat models however, certain versions still require AA batteries.

Therefore, before beginning the process of changing the batteries, always be aware of what batteries you require, and it is good to always have some on hand.

Another drawback is that while some of the newest thermostats have sliding battery compartments, some do not, necessitating the opening of the cover plate in order to access the battery compartment.

You may accomplish this by carefully pulling the cover plate away from the thermostats base plate. If necessary, you might have to remove a few screws.

Additionally, be careful to switch off the electricity before you begin changing the batteries to avoid coming into contact with any live wires.

Don’t Miss: How To Use Noco Genius 1 Battery Charger

Change A Honeywell Thermostat Battery In 6 Easy Steps

How to Change a Honeywell Thermostats Batteries

Are the batteries in your Honeywell thermostat flat? Dont worry, you wont have to put up with being stuck in the cold for much longer. This article will show you a step-by-step guide to changing the batteries.

To change the batteries on a Honeywell thermostat:

  • Turn the power off at the circuit breakers
  • Remove the battery compartment from the baseplate
  • Remove the old batteries
  • Replace the battery compartment to the baseplate
  • Turn the power on at the circuit breakers
  • Changing the batteries on your Honeywell thermostat is a really easy job to do. In fact, it wouldnt surprise me if it turns out to be one of the quickest jobs you do today.

    Fancy looking at some of the above-mentioned steps in more detail? Then make sure you check out the Honeywell thermostat battery guide below. Youll even find a handy video tutorial.

    How To Change A Honeywell Thermostat Battery

    Honeywell thermostat battery replacement if thermostat doesn’t work AC won’t turn on

    Honeywell has been a mainstay in the HVAC world for ages thanks to their world-class workmanship. This is especially true when you take a look at their thermostats. They last for ages without even needing so much as a battery change for months, if not years. But eventually, you will need to change their batteries if you want to keep your thermostat going. But how do you do that?

    Turn off your thermostat, open the battery compartment on the front, and remove the batteries. Put the new batteries in the compartment and slide the protective plate over them. Place the thermostat back on the wall, turn it on, and check to make sure that the new batteries work.

    In a lot of ways, replacing the batteries on a Honeywell thermostat feels like replacing the batteries in a remote. Its easy but you still need to know what batteries you should use as well as other small details. This will help you learn how to change your batteries.

    Recommended Reading: Audi E Tron Battery Replacement Cost

    Honeywell Thermostat 5000 Series

    The Honeywell Thermostat 5000 Series includes these models: TH5110D, TH5320U, TH5220D, and Focus Pro.

    The 5000 series battery compartment plates dont need to be separated from the base plate. These thermostats also include the Auto Changeover feature that will automatically switch between cooling and heating to maintain the set temperatures.

    Follow these steps to change the Honeywell 5000 thermostat batteries:

  • Turn off the thermostat.
  • Press and Pull the battery cover plate to remove it.
  • Remove the old AA batteries and replace them with new AA batteries.
  • Make sure the positive and negative polarities match up.
  • Put the battery cover back on.
  • Turn the thermostat and circuit power back on.
  • The battery replacement is now done.
  • Do All Honeywell Thermostats Require Battery Replacement

    Though most thermostats do require batteries to function, not all of Honeywells models will. If you cannot locate a battery compartment, if you plug your thermostat directly into the wall, or never receive LOW BATTERY alerts, then you probably have a model that doesnt require batteries.

    To make sure, look for a C-wire leading from the thermostat. If you dont have a C-wire, then your thermostat probably will need to get batteries replaced.

    Also Check: Liftmaster Garage Door Opener Battery Size

    Battery Replacement For The 1000 And 2000 Models

    These are the very basic thermostat models introduced by Honeywell. This series mainly has non-programmable models for the budget-minded.

    The models in this series include TH1100D1001, TH1110D1000, TH1210D1008, TH2110D1009, and TH2210D1007.

    Here is what you have to do to replace the batteries for these models:

    • Turn off the supply to your thermostat before replacing your battery. Sudden interruption or sudden change in work patterns could harm the proper working of the device in the future.
    • Examine your cover-plate for removal. You can either pull it using your thumb, index, and a middle finger placed either at the top and bottom or sideways. Or else you might have to twist or wiggle the base plate a bit and make sure it comes out correctly.
    • Once the cover-plates are off, we are ready to find the battery compartment or slot and replace the AAA batteries with new ones. The polarities of batteries should be taken care of while replacing.
    • Place the cover-plate back onto the base-plate and make sure it is intact.
    • Now turn on the device supply, and you are all set to go.

    Finding A Honeywell Thermostats Batteries

    How To Change Battery In Honeywell Thermostat Rth2310b

    Since Honeywell is a company that produces many thermostat systems, keeping track of them all can be a little confusing.

    Generally, however, the majority of their products need batteries in order for operation to continue through the control panel.

    In all models, these batteries can be found in the control panel area of the system.

    These batteries are either kept behind a sliding tray area or in the main area of the panel.

    The majority of models will require you to remove the faceplate of the panel to access these batteries.

    That being said, some models do have separate removable trays or lids where the batteries are kept.

    If you arent sure where the batteries are in your device, fear not.

    To find the batteries, you can first check the top area of the right right-hand corner of the devices control unit.

    If you dont see anything there, then theres a good chance that the batteries are located inside the unit itself.

    There would be a marking to indicate the location of the battery compartment, and you would simply need to slide it open, and you should be able to see the batteries.

    For the models that do not have a separate battery compartment, youll have to get inside the unit by removing the units faceplate.

    You dont need any tools for this unless there is a screw for you to work around.

    For the majority of models, however, all you need to do is pull down on the faceplate of the panel carefully.

    Doing this should unclip the faceplate from the rest of the unit.

    Also Check: Recycling Of Lithium Ion Batteries

    How Can You Tell If Your Honeywell Thermostat Needs A Battery Change

    Honeywell makes sure that they create products that make it clear what they need in order to remain well-running. If you need to replace the batteries in your thermostat, youll find out because the thermostat will tell you. Usually, this will be in the form of a light saying LOW BATTERY, or REPLACE BATTERY on the side of your thermostat.

    Some smart thermostats may also have other indicator systems, including a blinking light or a special message on the display. Check your owners manual to find out what your signals will be.

    Power On The Honeywell Thermostat

    At the circuit breakers, turn the power back on. By pressing the on/off button, turn the thermostat on. Moreover, you will be able to see a new cycle starting on the display after a minute of waiting. In addition, you can use your thermostat again after one minute after it has restarted.

    Your task is complete! Celebrate by dancing around the living room .

    How about a short video of all the steps? Here is the video:

    Also Check: 2016 Ford Fusion Battery Replacement

    Changing Honeywell Thermostat Batteries: Separate Battery Casing

    Hi!Welcome to Nestwell Property Managements 24/7 DIY Maintenance Center. Thank you for your question about your malfunctioning furnace. There are many different variables that can cause a furnace to malfunction. These include weak, dying or dead thermostat batteries, dirty filters, tripped breakers, gas disruptions by the gas company or city, or the furnace simply needs to be reset.

    The following video will show you how to find and remove the battery casing on a thermostat with a separate battery compartment:

    In the event changing the batteries does not resolve the issue, please search for the previously listed terms in the DIY Maintenance Center for tutorials addressing those common issues. Please be aware, in the event a vendor is required to tend to the issue, and it’s found that your furnace is malfunctioning due to one of the above-listed variables, costs associated with a trip fee, and the repairs will be added to your tenant ledger.

    If you need additional assistance, please log in to your Resident Portal and Request a Repair.Thank you!

    Series 6000 Honeywell Thermostat Replacement Of Battery

    Honeywell Thermostat Battery Replacement | How To Change Batteries

    Models TH6110D, TH6220D & TH6320U

  • Switch off the Thermostat from the circuit breaker.
  • Press and pull the cover from the bottom to remove the battery holder.
  • Slide out the battery compartment and replace it with AA batteries.
  • Now, put the cover as it was fixed to the base plate earlier.
  • Make sure to check the polarity of the battery before placing the battery compartment.
  • Read Also: Iphone 13 Pro Battery Size

    Remove The Battery Compartment From The Baseplate

    This step will change depending on the model of your Honeywell thermostat. Take a look at the table below that will show you the step that is right for your model.

    Basic Pull Design Hinge Design
  • If your thermostat has a basic pull design, put one hand on either side of the faceplate.
  • Pull and wiggle on the faceplate to tease it away from the baseplate.
  • If your thermostat has a hinge design, place your thumbs under the thermostat and your fingers on the top.
  • Pull from the bottom upwards to unhook the faceplate from the baseplates hinges.
  • S To Find The Model Number On The Back Of The Model

  • The first and foremost thing that you should keep in mind is to remove it from the electric socket. Keeping it connected to a source of electricity increases the chances of you being exposed to live wire which can give you a fatal shock.
  • The second step is to slide over the device off the base cover. Once it has been separated, you will find the model number written on the back of the device.
  • Once you are done noting the number, slide it back into the base cover and put it back in its original place. Your work here is done.
  • In case you cannot find the model number of your thermostat in any of these three places then there is only one option left. Check out the box or the user-manual that came with it for the model number. You will surely find it there.

    You May Like: 100 Watt Solar Panel Kit With Battery And Inverter

    How Do You Find Out The Model Number Of The Thermostat And Why Is It Necessary

    Next on, Honeywell thermostats replacing batteries. Let us talk about why it is necessary. As we were discussing before, each thermostat model has a different way of getting its batteries changed, so to know the right way to remove the battery from your device and replace it with the new ones, you will have to know about the model that you are using, that is, it is model number. This piece of information will ensure that you go in the right direction of doing the work.

    Now that we know why you need to know your devices model number, we will now talk about where you can spot it. If you are lucky enough then most devices have the number printed at the front of the model.

    In this case, finding the model number is no big deal. However, if you see that your device does not have the model number printed on it then there can be 2 places where you can find it. It is either on the back of the device or it is on the LED display.

    If it is one the display itself then again you will not have to go through much trouble to find it but if it is on the back of the model, then there are a few more steps involved.

    Batteries Might Be Faulty

    How To Change Battery In Honeywell Thermostat Th8321Wf1001 / How To ...

    If the problem persists, it might be because you unknowingly have used faulty batteries when youve replaced the batteries.

    To test whether this might be the problem. Take out the batteries and replace them with another set of fresh batteries.

    If you dont have extra batteries available, take out the batteries and put them into another device that is using the same type of battery, and check whether the batteries work sufficiently in this other device. If not, at least one of the batteries is faulty.

    Also Check: Mid 2015 Macbook Pro Battery Replacement

    Related Posts