How To Replace Subaru Key Fob Battery

Share This Post

Top Reasons To Replace Subaru Key Battery

Subaru Key Fob Battery Replacement (+Keyless Entry Trick) Cars Simplified

There are some common problems with the key batteries that you should consider before purchasing replacement parts. Today I am giving some top five reasons why you should replace your Subarus key battery.

  • When you have an older model of Subaru, the key battery may not last long. It could start fading out after two years or so.
  • Some people say that their key batteries dont work at all. If this happens, then there is no point in buying another one.
  • There are chances that your key battery may stop working due to overcharging. Overcharging can damage the battery and cause it to fail.
  • Sometimes, the key battery gets damaged by water. If this happens, you must dry up the battery immediately.
  • A dead key battery doesnt provide power to your vehicle. Therefore, it is very essential to check the condition of your key battery.
  • If you find any of these issues with your key battery, then you need to replace it. Otherwise, you may end up spending an exorbitant amount on repairing your vehicle.

    A Single Fob For Access And Starting

    Youve probably seen these fobs by now. Although these fobs look like they are missing a key, they have one integrated. Some of these are pretty attractive, such as a leather-wrapped fob that comes with some Volvo models. These key fobs can be kept in a pocket or bag for both access and starting in most cases.

    Key Fob Battery Change But Not Working 100%


    PLEASE pay it forward and donate to my MAKE-A-WISHAnd, remember, I am not your Subaru Technician – always discuss any suggestions with YOUR authorized Subaru service technician.

    Don’t Miss: Galaxy Z Flip 3 Battery Life

    How Much Does It Cost To Replace A Key Fob

    Theres no simple answer, but few modern key fobs are inexpensive. Even basic remotes may require special programming with computer software only accessible by a dealership.

    Though the repair wont take more than a few minutes to replace, this can get expensive.

    Kelley Blue Book contacted dealerships across the country for replacement costs of key fobs for some popular and high-end models. Quotes we got for replacing key fobs for a 2020 Subaru Forester with a push-button start ranged from about $200 to $400. A 2020 Toyota Sienna fob was about the same. However, dealers quoted as little as $150 to replace a 2017 Honda Accord key fob.

    Several BMW dealers said that the more advanced security features embedded in the fob for a 2020 X5 justify the roughly $500 they charge to replace and program one. If you think thats a lot, consider that the crystal fob Aston Martin included with some of its models might cost $2,000 to replace and reprogram.

    Can I Start The Subaru With A Key Fob That Has A Dead Battery

    Subaru Key Fob Battery

    If your Subaru has a dead battery, you can still access it if you properly place the key fob inside the car. You can do this by placing your foot on the brake pedal while pushing the key fob on the engine start button. While your foot is on the pedal, the engine will detect the chip on the key fob, and your car will start in a few seconds.

    Read Also: How To Change Battery On Car Key

    Replacement Subaru Keys & Key Fob Batteries In Cockeysville

    Need a new Subaru key fob battery? Lost your current Subaru key fob and need a new one? The Parts Department at AutoNation Subaru Hunt Valley has replacement Subaru keys and replacement key fob batteries in stock and available to purchase.

    Our team will gladly help you replace your battery and get your key fob configured with your vehicle again. Feel free to stop by our Subaru Parts Department in person or give us a call if you have any questions.

    Key Fob Replacement: What You Need To Know

    Todays key fobs do more than unlock and start a vehicle. They double as convenience devices and a significant theft deterrent. But key fob replacement is an issue.

    All that complexity makes them expensive to replace if you lose or break the key fob of your car. The days of getting a new key cut by a corner locksmith are long gone. In some cases, the only way to replace a car key is to visit a dealership and shell out hundreds of dollars.

    Your car insurance may cover the fob replacement, though going this route counts against your deductible. Replacing the key may not be a great plan if the automaker charges $400 for a new key fob and you have a $500 insurance deductible.

    In this article, well tackle the following challenges of key fob replacement.

    Recommended Reading: How To Change Battery In Honda Key

    Accessing And Driving Your Car When The Key Fob Is Dead

    If your car offers keyless access and engine start, you can still access your vehicle with a dead fob. You can release a physical key found inside the fob . In some cases, you can also open the trunk or liftgate.

    You can also hold the key fob up to the start and stop button to start the vehicle. Again, your owners manual will contain vehicle-specific information about where to hold the key fob.

    Read Related Articles:

    Insert The Mechanical Key And Test

    Subaru Forester / Outback / Impreza Key Fob Battery Replacement – DIY

    Now return the mechanical key to its original place. Fortunately, itll be a lot easier than the removing process.

    But your battery replacement doesnt end here. Testing the key fob is a must to ensure appropriate battery replacement. Use it to lock and unlock the car. Besides, try other features to ensure its working correctly.

    If the key fob fails to function, your vehicle may have an underlying issue. While its a bitter pill to swallow, cars being gadgets are prone to technical problems.

    You can always contact a professional mechanic to identify and fix the underlying vehicle problems, and if your car is insured, its even better the company takes responsibility for repairs.

    Also Check: 2008 Toyota Camry Hybrid Battery

    Why Does My Key Fob Not Work After Replacing Battery

    To open the key fob and inspect for damaged contacts or misaligned buttons, you may use basic tools. Replace the automobile key fob if that doesnt work. Another reason your vehicle remote may not function after replacing the battery is the lock. Check for these symptoms to see whether the lock or vehicle door has become faulty.

    Changing The Battery Of Your Subaru Key Fob

    The first step to changing your Subaru key battery is to remove the old one. To do that, you will need to figure out how to pry open the body of your key fob. We give you a step-by-step guide on doing so:

    • Locate the silver button on the back of your key fob and press it. This will trigger the release of the glove box key, which will open the glove box.
    • Slot the key into the slot to open the glove box. Once the glove box is open, you have access to the internal components of your key.
    • Using the key, push the button that secures the various compartments within the body of your key fob. Ensure that any loose parts such as the spring and button do not get lost in the process as you will need to put them back together later.
    • Remove the old battery, place the new one into the slot, and put your key fob back together.

    Read Also: Nissan Leaf Battery Replacement Cost

    How To Replace Battery In Subaru Key Fob

    CR2032 3V and CR2025 3V batteries are common replacements for Subaru key fob batteries.

    Similarly, What kind of battery goes in a Subaru key fob?

    CR2032 3V and CR2025 3V batteries are common replacements for Subaru key fob batteries.

    Also, it is asked, What battery does a 2018 Subaru Outback key fob take?

    How to change the battery in the Subaru OutbackSilver Sideskey fob For a step-by-step guide on how to replace the battery in your key fob, see the video below. You will need 1 CR2032 battery.

    Secondly, Can I replace the battery in my key fob?

    Yes, you can change the batteries in your key fob, and its a lot simpler than you would think. A little flat-tipped screwdriver and a fresh battery are all youll need.

    Also, How do you change the battery in a 2015 Subaru Outback key?

    Capitol Subaru is here to assist you How to Change the Battery in a Subaru Key Fob Invest on a fresh 2032 battery. Use a metal key or a flathead screwdriver to open the key fob. Inside the fob, look for the flat circular battery. Remove the tiny tabs that hold the battery in place. Assemble the key fob again.

    People also ask, How do you start a Subaru with a dead battery?

    If the battery on the fob is dead and you can start it, hold the fob to the start button and push the button. If its the automobile, open the hood and jump it like any other vehicle

    Related Questions and Answers

    What Size Battery Does A Subaru Key Fob Take

    Discount Keyless Remote Replacement Car Key Fob For Subaru Forester ...

    Popular batteries for Subaru key fob battery replacement are CR2032 3V and CR2025 3V. There are other types to use but it is essential to check the manual of your car to know the perfect battery type for your fob. You should make sure that the battery makes the right metal contact to get the most satisfactory result.

    You May Like: What Voltage Is Motorcycle Battery

    Shop For New And Used Subaru Vehicles At Competition Subaru Of Smithtown

    If you are looking to purchase a new Subaru vehicle or a pre-owned Subaru model, come to Competition Subaru of Smithtown for all your needs. We stock a wide range of models to suit different preferences, budgets, and lifestyle needs. Our sales department is open seven days a week while our service department is open Monday to Saturday. Our business is deeply rooted in the Long Island community, and we have made contributions to many organizations, including the Smithtown Childrens Foundation, Stony Brook Childrens Hospital, and more. Our sales department can be contacted at 888-604-0343.

    How To Install The New Battery In The Key Fob

    Spring is here and along with it, warmer weather! Warmer weather means more time spent outside, and more time spent outside means your car key fob battery is going to die sooner. So, today were going to show you how to install the new battery in the key fob. To start, youll need a flathead screwdriver.

    With the screwdriver, pop opens the back of the key fob. Once the back is open, youll see the battery. Using the screwdriver, carefully pry the old battery out and dispose of it properly. Take the new battery and insert it into the key fob, being careful to line up the positive and negative sides correctly.

    Once the new battery is in place, close up the back of the key fob with the screwdriver. And thats it! Youve now successfully installed a new battery in your key fob. Thanks for following along and feel free to leave any questions in the comments below.

    You May Like: Who Sells Bosch Car Batteries

    S To Replace Subaru Key Fob Battery

    The Subaru key fob is usually sealed tight to prevent water from getting in and causing short circuit which will ruin the fob. The battery is tightly secured to ensure the fob works even when you are moving or you are in a place with vibration.

    In some instances, the key fob will need to be reprogrammed after battery change.

    Step 1: Unscrew the screw holding the two parts together. Use the right screwdriver to avoid damage to the screw or the fob casing.

    Step 2: The battery is usually held by a plastic casing that is hooked to the control system via hooks. Carefully release the clippings that hold the casing to the control system.

    Step 3: The metal contacts that form the circuitry further holds the battery down and you may need to tap it softly to release the battery.

    Step 4: Replace the old battery with the new one and ensure that the battery faces the same side as the old battery.

    Step 5: Insert the plastic casing back and ensure all the clippings are properly locked in place.

    Step 6: Put the other outer cover of the key fob back and tighten the screw. Make sure the screw is tight to ensure that dust and water does not sip into the key fob.

    How To Replace The Battery Of A Subaru Key Fob

    Subaru Forester Key Fob Battery Replacement (2016 – 2021)

    Here are the steps to replace your Subaru key fob battery:

  • Remove the physical key from the keyless entry by pressing the small button at the back of the key fob.
  • Insert the flat-bladed screwdriver into one end of your key fob’s slot. Then, twist it to separate the two sides and open its compartment.
  • Remove the old battery by inserting the screwdriver underneath to pry out the battery.
  • Slide in the new battery inside the compartment. The side of the battery with the positive sign should be facing up.
  • Before closing up the two cases, check the bottom where the battery compartment is placed and ensure no dust or dirt is left.
  • Reattach both sides of your Subaru Key Fob together and return the physical key.
  • Press the buttons on top until you hear a beep for each one pressed. If it does, you have replaced the battery successfully.
  • Also Check: How Long Does Galaxy Watch 4 Battery Last

    When To Replace Your Key Fob Battery

    How long your key fob battery lasts depends on several factors such as how often you use it, your climate, and if the battery has been replaced before. A new key fob battery should, on average last a few years before you need to replace it. If you recently replaced your key fob battery and the key fob is still not working correctly, the problem is likely with the key fob itself.

    Have Questions About How To Replace A Subaru Key Fob Battery

    If you’ve read our guide and still have questions about how to program a Subaru key fob or how to change the battery in your Subaru key fob, give Subaru South Tampa a call at 884-7513 or contact us online. We can help our Wesley Chapel neighbors troubleshoot any Subaru key fob-related issues they might be having. If you’re looking for a complete Subaru key fob replacement, we can help you with that as well! In the meantime, take a moment to explore our Subaru research guides and Subaru parts tips for other helpful reads!

    Also Check: Change Battery In Vw Key Fob

    A Quick Guide On Subaru Key Fob Battery Replacement

    A Subaru key fob battery replacement is inevitable if you discover signs of imperfect operations of your key fob.

    If you are very observant, you dont need to wait till the battery is dead before replacing it.

    It will be giving you signs that will indicate that there is a need for a replacement.

    If there is a reduction in its signal range or there are click inconsistencies, you may have no other option than to replace the battery.

    At times, unlocking is delayed for up to two seconds and the headlights of your car may not blink when you unlock it.

    Importance Of Subaru Key Fob Battery Replacement

    2012 Subaru Outback Battery Replacement

    The battery in your Chevy key fob is important for a number of reasons. Not only does it power the device that allows you to remotely unlock your car doors, but it also helps ensure that the transponder chip inside the fob is properly powered. This chip is what allows your car to start when you insert the key into the ignition. If the battery in your key fob dies, it could prevent you from being able to start your car. For this reason, its important to replace the battery in your Chevy key fob as soon as possible if it starts to die.

    Don’t Miss: Replacing Jeep Key Fob Battery

    Check Your Cars Insurance Or Warranty

    Before you purchase a new key fob, knowing if your damaged or lost key is covered under any car-related policies is essential. This cost-saving measure will cut down on or eliminate out-of-pocket expenses.

    If your insurance or warranty covers the lost keys, youll keep yourself from replacement hassles.

    How To Change Your Subaru Key Battery

    Has your Subaru key fob run low on battery, or is it not working as well as it used to? If so, you may be wondering if you can change out the battery by yourself, without the need to head down to a mechanic or engage professional services. The answer is yes.

    In this guide, we share with you how you can change your Subaru key battery. Depending on the type of key fob you have, all you will need is a flathead screwdriver and a new battery which can be purchased cheaply from any convenience or grocery store.

    Also Check: Where To Get Battery Replaced Car

    Return The Control Module

    After the successful insertion of the new battery, carefully return the control module into the housing.

    You should make sure that you return the module to the right housing so that closing the housing will be as easy as ABC.

    That is why you are advised to mark the housing with the module after the latters removal in step 3.

    Related Posts