Kidde Smoke Alarm Battery Replacement

Share This Post

Architectural And Engineering Specifications

How to replace Kidde Smoke Detector Battery

The Kidde i9010 is a 10-year, sealed battery operated smoke alarm featuring Hush, Alarm Memory, and a self-activation mechanism that makes installation simple and easy.

The alarm will automatically activate when it is attached to the mounting bracket there are no pull-tabs, no switches–everything is automatic. The sealed-in board-mounted battery will power the i9010 unit for its complete 10-year life. No replacement battery will ever be needed, and an End of Life alert indicates when it is time to replace the alarm.

At the end of the alarms 10-year life, deactivation of the alarm is just as easy. Using a tool such as a small screwdriver, a deactivation switch removes power from the alarm and renders the battery safe for disposal. As an added safety mechanism, the alarm lockout feature prevents a deactivated unit from being mounted back on the mounting bracket.

The i9010 also features Hush technology, allowing consumers to temporarily silence nuisance alarms, and an Alarm Memory feature that alerts the user via rapidly flashing LED lights if the alarm has sounded since the last time the test/reset button was used.

This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles sooner than ionization alarms.

Light Bulb Store Near Me

Online searching for a light bulb store near me? Look no further than Batteries Plus Bulbs. Youll find an enormous selection of options for your home, vehicle, or business needs. Our associates can help advise you on upgrading to LED light bulbs, CFL bulbs, fluorescent light bulbs, and other energy-efficient options. Plus, we carry a variety of interior and exterior lighting products, as well as *smart home products like smart light bulbs, plugs, doorbells, and cameras.

To Replace Batteries In Models With Front

  • Open the battery compartment door by pressing down on the battery compartment door, then release to allow the door to pop open. Pull the battery straight out of the compartment.

  • Insert the battery into the compartment. Make sure the battery’s connectors are facing out. Line up the plus and minus connectors with the yellow label on the bottom of the battery compartment.

  • Once the battery is inserted, press down on the battery compartment door until it snaps into the closed position. If the battery door slides open, make sure it’s open all the way before removing and installing the new battery. For models using AA batteries, make sure the contacts are not facing the same direction.

  • NOTE: A missing or improperly installed battery will prevent the battery compartment from closing.

  • Press the test button to make sure the unit operates on battery only before installing the unit back on the ceiling. If the unit does not sound, re-open the battery compartment door to make sure that the batteries are lined up properly.

For detailed instructions and diagrams, consult your user’s manual.

Google Assistant is a registered trademark of Google LLC. Amazon, Alexa and all related logos are registered trademarks of Amazon Technologies, Inc.

  • Supportkeyboard_arrow_downkeyboard_arrow_up

Read Also: Gaming Laptop With Best Battery Life

This Product Is No Longer Available

This product is no longer available. We’ve left this page up for reference only.

Product Overview

  • Uses an ionization sensor to detect smoke / fire
  • Audibly alerts patrons at 85 decibels up to 10′ away
  • Hush feature allows you to silence any nuisance alarms
  • Includes a 3V lithium-ion backup battery to maintain operation during power outages
  • Mounting bracket ensures easy installation on any wall or ceiling
5 – 85 %

How Do I Replace My Smoke Alarm’s Battery

Kidde 9

Kidde recommends replacing the batteries in all of your alarms at least once a year, or any time the unit indicates that the battery is low. The general rule is to replace the battery twice a year: once when you switch to daylight savings time, and once when you switch back to daylight standard time.

When the battery requires replacement, the alarm will sound with a short beep or chirp. At this time, you must remove the old battery and replace it with a fresh battery of similar brand. Here’s how to change the battery in your smoke detector:

You May Like: Can Rechargeable Hearing Aid Batteries Be Replaced

Battery Place Near Me

With over 700 stores throughout the United States and Puerto Rico, theres sure to be a Batteries Plus Bulbs nearby. Stop in today for the best selection of energy and lighting products. Be sure to ask about how to save your business time and money by opening up a commercial account. Our experts are always on hand to answer your questions and help you find exactly what you need.

*Smart home & key services vary by location check your nearest store for eligibility.

Clean The Sensor Alarm Standalone Smoke Kidde 29

This interview must take place at least once per month and only takes a few minutes.

To do this, unclip the smoke detector kidde 29-FR from its base by turning it in the opposite direction of the needles of a watch. With the soft brush of your vacuum cleaner, remove any dust from the inside of the smoke detector through the various openings. Go, then, with a stroke of a damp cloth on the outside and replace the daaf in place. Proceed, finally, to a control test to ensure that everything is good.

Don’t Miss: Battery For 2017 Honda Civic

Specialty Batteries Near Me

Were so much more than just one of those places that sell batteries. Visit any one of our stores for access to more than 60,000 unique batteries, light bulbs, and accessories. We offer unmatched service to consumers, businesses, and government entities at the national and local levels. Our friendly staff will help you find the boat battery, motorcycle battery, or car battery youre looking for, as well as additional options for snowmobiles, laptops, UPS systems, watches, lawn equipment, scrubbers, golf carts, maintenance equipment, industrial use and more.

Installation Of The Kidde 29

Replace battery in Kidde 4973 smoke alarm

It is recommended by the manufacturer Kidde to place your smoke detector 29-FR within a room of main life, in the middle of the ceiling preferably. If it is not possible to do so, you can install the daaf to the wall measuring 30 cm at maximum from your ceiling. If your habitat is spread over several levels or only one of your rooms is of a length greater than 9m, Kidde recommends that the arrangement of at least two smoke detectors. For the room, it will be a daaf at each end and to the upper floors, a smoke detector is recommended in the stairs leading to it.

You May Like: How To Change Battery In Liftmaster Garage Door Opener

Detector Communication And Special Features


Some smoke alarms are combination units which detect carbon monoxide as well as smoke and fire. Combination alarms are available in hard-wired and battery operated models, and have two different alarm sounds to tell you whether its smoke or CO.


Since it is against the law to disable smoke alarms, many smoke alarms are now available with features such as hush buttons, which temporarily silences a nuisance alarm.

Additionally, smoke alarms are available with strobe lights, pillow/bed shakers, and other notifiers for those who are hearing or visually impaired.

Batteries Plus Phone Repair

Bring in your broken devices for expert tablet and cell phone repair. Our technicians provide a wide range of services, including iPhone screen repair, iPhone battery replacement, Samsung repair, Galaxy S8 screen replacement, as well as repairs for your Galaxy Fold, Note10, Google Pixel, LG, HTC, Motorola, or Nokia phone. We even fix broken ports, speakers, and buttons.

Recommended Reading: Service Battery Charging System Gmc Acadia

To Replace The Battery In His Smoke Alarm:

The smoke detector Kidde 29-FR is powered by an alkaline battery whose life span is estimated at 12 months. This therefore requires regular replacement in order to always be secure. We recommend that you put only the batteries that you are named in the notice to prevent damage to the device.

Note : a beep sound is heard 30 days prior to the end of life of the battery, which leaves you the time of the change.

Looking For Specific Info

1275CA : Kidde 120V Hardwire Ionization Smoke Alarm, Battery Backup ...

4.6 out of 5 stars

Customer Reviews, including Product Star Ratings, help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we donât use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyses reviews to verify trustworthiness.

5.0 out of 5 stars

Read Also: Battery Back Ups For Computers

How To Replace Wired Smoke Detectors And Prevent Them From Chirping

Q: My home has hard-wired smoke detectors. How often do I need to replace them, and what kind of replacements do I need? Can I do it myself, or do I need a professional? And if I need a pro, what kind?

A: Manufacturers typically use the term smoke alarms to refer to the kind that blare and smoke detectors for ones that both blare and send an alert to a security company or your cellphone. But whatever you call them, they should be replaced every 10 years, according to manufacturers and the National Fire Protection Association, a nonprofit organization funded by the fire-protection industry that provides code language for local building departments and certification programs for people in various safety-related roles.

Many smoke alarms now come with sealed lithium-ion batteries designed to last for 10 years, and some building codes are moving toward requiring these in new construction. A 10-year battery eliminates the hassle of waking up in the middle of the night to the incessant chirping of a worn-out battery. It also reinforces the advice to replace alarms every 10 years. Once a 10-year battery fails, the whole device needs to be replaced. When detectors are about that old or older, replace them all at the same time. But if they are just a few years old and one keeps chirping even after youve replaced the backup battery or fails to sound when you press the test button, just replace that one.

Related Posts