Replace Audi Key Fob Battery

Share This Post

Can You Drive With A Dead Key Fob

Audi Key Fob battery change – (US) Key battery DIY

No auto manufacturer is going to pin everything on the key fob working all the time. Therefore, even if your battery dies, you can still use the fob to drive the car.

  • Despite most cars going keyless, several of them still have a key slot usually located on the steering column. It will typically be covered by a plastic cover which you can pop off. Once you insert the physical key into it, you can easily turn on the car and drive away.
  • Some cars begin ignition with the START button, which switches on the car only if the key is detected. With a dead battery, the car may not recognize the key fob and hence the START button may be unresponsive. In such cases, you can use the fob itself to push the START button, which will switch on the car.
  • Some vehicles like Fords have a slot on the steering column where you can insert the fob, which will start the vehicle.

What Is A Key Fob

A key fob sometimes called a remote keyless system is a handheld device that allows you to lock and unlock your vehicle remotely. It consists of a remote control and RFID antenna that is connected to your cars locking system. Some key fobs have a retractable physical key with which you can lock/unlock your car manually as well.

How To Change The Battery Of A Honda Key Fob

To replace the battery of a Honda key fob, ensure you first buy a replacement CR2025 battery. It will cost you between $2-4 dollars for a pair of batteries.

  • Slide the button to release the physical key
  • Pry the key fob open into two halves using a finger or screwdriver at the seams
  • Pop out the old battery and replace it with the new one
  • Take care to insert the new battery in the same orientation as before, with the correct and signs in place.
  • Test the battery for any issues and ensure it is in proper working condition

Also Check: 2008 Ford Escape Hybrid Battery

Audi Remote Battery Replacement

This Audi key fob also requires one CR2032 battery. To change out the battery, you’ll need to:

  • Flip open the metal key
  • Press the back cover of the key using a small screwdriver
  • Pop up the back cover at the end of the keyfob
  • Remove the back cover the battery will be located inside
  • Pull out the battery, making sure to pay attention to note the positive side of the battery
  • Put a new battery in the back cover
  • Place the back cover back on the Audi key fob

Our Auto Locksmiths Can Program Your Key Fob And Car Remotes Call Today

4 Buttons 315MHz Remote Key Fob With Battery For Audi A3 A4 A5 Quattro ...

What is a remote head key? These car keys, or fobs, are distinguished by containing a remote control in the head of the key. And remote head key programming is a complex process that professional vehicle locksmiths perform better than any other option out there. Whether your remote head key has a transponder chip or not, when it becomes necessary to program it, only a car dealer or locksmith can provide this service. Guess which one will cost you an exorbitant amount of money?

Don’t Miss: Interstate Batteries Srm-24 Marine/rv Deep Cycle Battery

Why Visit Our Audi Service Center In Riverside

As with all batteries, the battery in your key fob will need to be replaced at some point. When that time comes, visit the Walter’s Audi service and parts center. We carry genuine OEM replacement parts and accessories, meaning we can quickly replace the battery, or key fob, for you.

In addition to our highly rated customer service and our state-of-the-art facility, we also offer regular Audi service coupons and parts specials to help you save throughout the many years and miles you’ll have with your Audi.

  • Monday9 AM- 9 PM
  • Tuesday9 AM- 9 PM
  • Wednesday9 AM- 9 PM
  • Thursday9 AM- 9 PM
  • Friday9 AM- 9 PM
  • Saturday9 AM- 8 PM
  • Sunday10 AM – 7 PM

Audi Key Fob Battery Replacement

It is hard to enjoy the excellence of your Audi when the literal key to your enjoyment is compromised! This vital little tool helps you lock and unlock your vehicle, as well as open your trunk and drive off in certain models. Every once in a while, though, you’ll need to replace the battery in your Audi key fob. Or replace the key fob in its entirety if lost. If or when that time comes, you can be sure to trust the experts at our Audi service center in Riverside near Los Angeles and Orange County!

You May Like: Toyota Camry Key Fob Battery Replacement

How To Replace Remote Fob Battery In Audi A4 A5 Q7 And Tt

This tutorial explains how to replace the key fob battery in Audi A4 B9 , Audi A5 F5 , Audi Q7 2nd Gen. 4M , Audi TT 8S with key fob pictured below .

LED in the remote control key If you press a button briefly, the LED blinks once. If you press and hold a button , the LED blinks several times. If the LED does not blink, the remote control key battery is dead. The message Remote control key: replacekey battery can also appear in the instrument cluster display. Replace the battery.

To replace remote fob battery youll need:

new CR2032 3v battery

In order to replace it, follow the steps:

Step 1: Press the release button and remove the mechanical key from the remote control key.

Step 2: Press the release buttons on the battery holder while pulling the battery holder out of the remote control key in the direction of the arrow.

Step 3: Re-install battery, and slide the battery holder carefully into the remote control key. Insert the mechanical key.

Battery orientation is with the side down.

The instructions in this tutorial will work in the following model years: Audi A4 B9 2017 and 2018 Audi A5 F5 2018 Audi Q7 2nd Gen. 2017 and 2018 Audi TT 8S 2016, 2017 and 2018

How To Replace A Cr2032 Battery In An Audi Key Fob

Audi A3 key fob BATTERY REPLACEMENT

How to replace a CR2032 rechargeable battery in an Audi key fob is easy. First, remove the back cover. Then, insert the key fob with the batterys positive side facing up. Replace battery Audi key fob with a new one. Make sure the key fob remote works before reinstalling the back cover. If you have an Audi key fob with an internal battery, the process is even simpler.

To start, remember that not all CR2032 batteries are the same. The type of battery and its discharge characteristics also differ from one another. The right type for your key fob will prolong its life. Moreover, the battery should not be exposed to extreme temperatures, as this may damage the circuitry. Also, dont let the key fob get wet because moisture can damage the circuitry, which in turn shortens its life span.

To replace battery Audi key fob, locate the release tab located in the chrome part of the key. Once youve located it, remove the plastic and metal part from the key. Carefully insert the new CR2032 battery into the same spot inside the key fob. After removing the battery, place the metal key blade back inside the shell. Repeat the process until youve replaced the entire battery.

Also Check: Go Pro Hero 8 Batteries

Programming A Volkswagen Key Fob

  • Take the key B, insert it into the ignition, and turn it into the on position. Do not turn the engine on or even crank the motor.
  • While the car is in the on position, step out of your Volkswagen and close the driver door. Take key A and insert it into the door lock, turn it to lock the door, and remove key A. Yes, it may be a weird thought to lock the vehicle with a key in the ignition. Keep following along.
  • With key A, hold the unlock button on the fob itself for one second.
  • Once unlocked, open the driver door and turn key B, in the ignition, to the off position. Remove key B from the ignition. Now it should be programmed to your vehicle.
  • To test this, close the driver door and test key B to see if pressing the buttons on the fob unlocks and locks your Volkswagen. If not, repeat steps 1-4 carefully again.
  • If the above steps do not work, reach out to your dealer. They should be able to walk you through the steps to program your new key over the phone. If you dont have a spare key to reprogram, the dealer will have to program your key anyway.

    How To Change The Battery On Audi Smart Keyless Entry Remote

    This key fob has been used in many Audi cars since 2008, including A, Q, R, S, and TT models. If your Audi key fob battery is too weak or dead, it will prevent you from starting the car using the Start/Stop button.

  • Use your thumb to press on the key release found in the chrome part of the key.
  • Pull the metal key blade from the shell.
  • Press the exposed plastic with your thumb and pull it out of the shell.
  • Remove the battery from your Audi key fob. Pay attention to the positive side of the battery.
  • Install a new battery into your Audi key fob. The positive should be facing the plastic side.
  • Press the battery holder and the metal key into the shell.
  • Flip the metal key open.
  • Use a small screwdriver to press the back cover of the key.
  • Pry out the back cover at the end of the keyfob.
  • The battery is inserted into the back cover. Pry it out and pay attention to the orientation of the positive side of the battery.
  • Press the new battery on the back cover.
  • Press the back cover into the Audi key fob.
  • Battery Size: CR2032

    We hope that these videos and step-by-step instructions helped you learn how to change the battery on any Audi key fob remote.

    Over the years, Audi has come out with a few different key designs.

    These instructions were written to help owners change the key fob battery on Audi models such as the A3, S3, RS3, A4, S4, A5, S5, A6, S6, A7, S7, RS7, A8, S8, Q3, Q5, SQ5, Q7, TT, and R8.

    Read Also: 2016 Volvo S60 T5 Premier

    You May Like: Where To Get New Car Battery

    Audi Smart Keyless Entry Remote Battery Replacement

    You’ll need one CR2032 battery for your Audi Smart Keyless Entry Remote. After that, you’ll need to:

    • Locate the key release found in the chrome part of the key and use your thumb to press down
    • Remove the metal key blade from the shell
    • Grip the exposed plastic of the battery holder with your thumb and remove it from the key fob
    • Remove the battery, making sure to note the positive side of the battery
    • Replace it with a fresh battery, making sure the positive side is facing the plastic
    • Add the battery holder back into the shell
    • Reinsert the metal key into the shell

    Cost Of Replacing A Key Fob

    Replacement Smart Remote Key Fob 434MHz for Audi A4 A5 Q7 TT 4M0 959 ...

    There are many advantages to replacing the battery in your Audi key fob yourself. Its much cheaper and faster than taking it to the dealer, and you wont have to pay for an entire new battery. Audi key fobs can have a variety of security features and are generally larger and smaller than regular keys. Some Audis even have built-in keyless entry, which makes replacing them a lot easier.

    To perform a Audi key fob battery replacement, youll need a flat-head screwdriver and a new battery. You may have to re-programme the key fob after replacing the battery. Most key fobs take lithium button/coin cells, like CR2032 and CR2025. Other brands may also work with your Audi key fob. Make sure to check the car owners manual to be sure youre replacing the correct battery.

    Don’t Miss: Solar Panel Charger For Battery

    How To Change Battery Audi Car Key

    As an Amazon Associate, I Earn From Qualifying Purchases.

    Last Updated on August 11, 2022 by Ellis Gibson

    If youre an Audi owner, you know the importance of having a working key fob. After all, its your key to getting into and starting your car. But what do you do when your key fob battery dies? In this article, well give you some tips on how to change your Audi key fob battery and get you back on the road in no time.

    So, how to change battery audi car key?

    If your Audi key fob has a dead battery, youll need to replace it. To do so, follow these steps:

    1. Remove the key fob from your key ring.

    2. Using a small flathead screwdriver, pry open the key fob case.

    3. Remove the old battery and insert a new one. Make sure the positive side is facing up.

    4. Close the key fob case and reattach it to your key ring.

    5. If your key fob has a transponder chip, youll need to have it programmed by an Audi dealer.

    Lets dig into it and see if we can get to the bottom of it.

    # Table of Contents

    You May Like: 2022 Bmw 5 Series Images

    When To Replace Your Key Fob Battery

    How long your key fob battery lasts depends on several factors such as how often you use it, your climate, and if the battery has been replaced before. A new key fob battery should, on average last a few years before you need to replace it. If you recently replaced your key fob battery and the key fob is still not working correctly, the problem is likely with the key fob itself.

    Recommended Reading: Does Advance Auto Install Batteries

    Types Of Batteries Used In Key Fobs

    There are several types of batteries used in Audi key fob battery replacement. One of these types is the lithium-ion rechargeable battery, or Li-Ion. Lithium-ion batteries are generally smaller in size than their CR counterparts, but have much higher discharge rates and higher capacity. These batteries are also commonly labeled as CR2025.

    The battery in an Audi key fob is a small circular lithium-ion battery called a CR2032. These batteries are commonly used in watch batteries and electronic devices. This type of battery is relatively easy to replace and is available at most stores and even on the internet. CR2032 batteries can also be used in a conventional key fob. In order to replace the battery, youll need a Phillips head screwdriver and a flat object to get the job done.

    If the key fob battery is not performing well, you can do a Audi key fob battery replacement in the comfort of your own home. Audi Q5/Q7 models come with a key fob that is equipped with a battery that requires replacement. Changing the battery is a simple process that can save you time and money without the need for an appointment with an Audi dealership. It is also possible to replace the battery in your key fob if it dies while driving, which can result in a more frustrating experience.

    How To Program Audi Key Fob

    How To Replace A 2006 – 2010 Audi A4 Key Fob Remote Battery

    Audi key fobs have a lot of advantages over conventional keys, but also have disadvantages and one of the disadvantages is that they are difficult to program.

    This is because the recent Audi key fobs are programmed by the company so it is very difficult to program it on your own.

    To program the key Fob on your own. First of all, you need to purchase a Radio frequency identification system writer and one blank fob.

    You will have to copy another fob by examining its information with the new RFID device. After doing this, you can now use that exact device to inscribe the data to a new fob.

    All these are technical work that requires a professional to do it for a perfect working fob because specific equipment, like a programming device, is needed to program an Audi key fob.

    Don’t Miss: Does Walmart Sell Interstate Batteries

    What Is Key Fob

    Fob is a free onboard control system that is used to grant access to a vehicle without using the key.

    A key fob is a small remote control system and a programmable hardware gadget that grants access to your car without using the key to open it.

    Imagine you went shopping and you have a lot of groceries on your hand which will make it difficult for you to use the key to open your car trunk, you only need to press one button on the fob and your car trunk will open, isnt this amazing?

    The Audi key fob will grant anyone holding it access to the car conveniently, so anyone without it wont be allowed into the car unless they forced themselves in but the car still wont start until the car fob grants access.

    Checking The Battery Life

    The first thing to check when your key fob fails to operate is the battery. Many fobs have a little LED light that will illuminate when you press the fob buttons. If the LED light does not illuminate, the battery inside is dead or has some other issue. Check the voltage of the battery. If it is less than 3 Volts, the fob is probably too weak to work.

    Most fobs can be pried open to access the battery. Check the voltage to determine if it is low or if it is completely dead. When the voltage is too low, a warning light will appear. Replace the battery as soon as possible. Make sure to buy the correct type of battery. Incorrect types of batteries will not work correctly. You can find replacement batteries online or in your owners manual.

    Also Check: Car Battery Replacement At Home

    Related Posts