Replace Mazda Key Fob Battery

Share This Post

Signs Of A Dying Mazda Key Fob Battery

How to Replace the Battery in Your Mazda Key Fob

Its not hard to notice when your key fob is starting to have problems, but we use them so often, sometimes we neglect the obvious.

  • More clicks than usual: You may not notice it because sometimes we might just click and click until what we want to happens does. But if you notice you have to click X amount of times more than what is recommended, then thats a good sign that the key fob battery is wearing down.
  • Doesnt work consistently: There might be times when the key fob doesnt want to work for you, and you think to yourself, thats odd, but it probably isnt as odd as you think. Its probably your battery struggling to work, and if you dont get it fixed, it will die completely.
  • Signal strength is not as good: There might have been a time when you could start your car from across the parking lot or further, and now you have to be right on top of it to unlock the doors and start the engine. This is a common Mazda key fob battery loss problem.
  • Dashboard Warning: Your dashboard pops up a lot of different warnings and cue-ins, but if your key fob is dying on most cars, it will let you know on the dashboard. Its easy to ignore these dashboard warnings, but they are there for a reason.

The CoPilot car shopping app is the smartest way to buy a car. Get a curated list of the best cars for sale in your area, as well as notifications if a similar vehicle is listed nearby at a lower price. CoPilot is the smartest way to shop for used cars.

Battery Place Near Me

With over 700 stores throughout the United States and Puerto Rico, theres sure to be a Batteries Plus Bulbs nearby. Stop in today for the best selection of energy and lighting products. Be sure to ask about how to save your business time and money by opening up a commercial account. Our experts are always on hand to answer your questions and help you find exactly what you need.

*Smart home & key services vary by location check your nearest store for eligibility.

What You Will Need

  • A tape-wrapped flathead screwdriver.
  • A replacement battery.
  • If you dont know if the battery in your Mazda key fob is dead or at low power, there are some ways for you to know. If the KEY dashboard warning light illuminates right in the instrument cluster when the car engine is off, if the key fob and its functions or indicator light does not work, or if the key fob isnt working from a far distance as it once did. If you notice these issues, then its very likely that the key fob is dead and should be replaced. Once you have all the necessary materials and tools that you need, youll be able to get started with replacing the key fob battery for your Mazda.

    Don’t Miss: How Long Does 20 Percent Battery Last On Iphone

    Where Can I Find One And How Much Will It Cost

    Because these batteries are so common, you can find them just about anywhere. You can pick them up at Wal-Mart, AutoZone, Family Dollar, gas stations, and convenience stores. Pretty much anywhere you can buy batteries, you can buy CR2025 3-volts.

    Generally, you can expect them to range in price from around $2.50 to $5.00 for a single battery or a two-pack. Or if you want to save some money, and make sure youre always prepared, you can buy a 25-pack for around ten bucks from .

    Some drivers report that a CR2032 3-volt actually works better, extending the range of the key fob. The numbers refer to the physical size of the battery. A 2032 is 3.2mm, and a 2025 is 2.5mm.

    The voltage is the same youre not going to fry your key fob upgrading the battery, so if a 2032 will fit, theres no reason not to use it.

    How Do I Replace A Mazda 5 Key Fob Battery

    Mazda 3 Key Fob Battery Replacement 2012

    The key fob for my Mazda 5 just randomly stopped working the other day and I’m really hoping it’s just an old battery. Once I get a new key fob battery, how do I replace the old one?

    three to four year

    • Press the release button for the physical key
    • Taking a small flat head screwdriver, gently wedge the head in the side seam of the key fobâs casing to pop apart the fob
    • Remove the battery cover and dead battery. It can be helpful to use a small tool for this as well
    • Insert the new battery ensuring the positive side of the battery is facing up
    • Replace the battery cover and snap the key fob case back together

    Don’t Miss: At Home Car Battery Replacement

    What Type Of Battery Does Mazda Key Fob Use

    The Mazda key fob uses battery type CR2025 which is a primary coin battery that is not rechargeable and gives 3 volts.

    The CR2025 battery has a shelf life of 10yers while it is stored under normal room temperatures.

    It will last anywhere between 3years and 5 years while it is being used on the key fob. However, the time the battery lasts will also depend on the usage and the usage environment.

    The battery will operate optimally in a wide range of temperatures ranging from -200C to as high as 600C.

    Any operational temperatures above or below this bracket will lead to irreversible damage to the battery.

    Mazda Key Fob Battery: How To Choose The Right One

    Your Mazda key fob works like magic, making life easier on busy days. But what if it suddenly becomes less responsive and eventually loses power? Theres no need to rush to a Mazda service center right off the bat. Theres a good chance the key fob just needs a simple battery change.

    What kind of battery does a Mazda key fob need?

    Most Mazda vehicles, including ones with the Advanced Keyless Entry system, use a key fob powered by a CR2025 battery. Also known as a coin battery because of its round shape and silver tone, the CR2025 is a 3-volt lithium battery. Its the same battery that powers common small electronics such as digital watches, hearing aids and fitness devices.

    Also Check: How Many Volts For Car Battery

    How To Replace Mazda Key Battery

    How To Replace Mazda Key Battery. Just give it a little, just line it up, itll clip together. Without damaging the small rubber ring that the battery rests on, remove the now fully exposed mazda key fob battery.

    All you need is a small flat head or pocket screwdriver, a replacement battery from your local. It opens and starts your vehicle with a push of a button from outside without inserting it in the keyhole or fob pocket. Follow these final steps and get back on the tampa roads:

    Source: www.servicetutorials.com

    But if you prefer a professional to handle it, you can always call us. Bear in mind where you place it.

    Source: www.youtube.com

    It opens and starts your vehicle with a push of a button from outside without inserting it in the keyhole or fob pocket. Remove the battery cap to expose the battery.

    Source: www.youtube.com

    The positive is on top, while the negative side of the button cell battery is facing the key fob. You should hear a snap when its securely in place.

    Source: theguideways.blogspot.com

    Take off the battery protection cover and access the battery. Once the key fob is opened, itll only take a few moments to change out the battery and get back on the lexington roads.

    Source: morganalvarez.blogspot.com

    Bear in mind where you place it. Replacing the cr2025 battery in your mazda key fob is a cinch.

    Source: www.tracymazda.comSource: morganalvarez.blogspot.comSource: www.youtube.comSource: tp-tutor.blogspot.comSource: fantaco.storeSource: fantaco.store

    Dont Get Stranded With A Dying Mazda Key Fob

    How To Change A Mazda 6 Key Fob Battery (2006-2012)

    If your key fob is dying, you can still start your car up and drive to your next destination. Mazda has prepared for this type of situation, so you dont get stranded.

    First, heed all of the warning signs of a dying key fob battery because this trick will only work if you have a little juice left in your battery. If your battery is completely dead, its a no-go.

    When you get in your car to start your vehicle, do just like you would if the vehicle had no key fob problems. Press on the brake, take your key fob and push the start button with the key fob, and everything should start up just fine. This is another temporary fix that will only work for a short period of time.

    Also Check: Best Laptops For Battery Life

    Learn More From Power Mazda

    If you have questions or are having trouble changing your Mazda key battery, contact us at Power Mazda! One of our team members will be happy to change your key fob battery for you! Have any other questions about your Mazda vehicle? Our team can help with that as well. From resetting your Mazda check engine light to changing your Mazdas flat tire, our team members are experts on all things Mazda! We can even help you find some of the best Mexican food in Portland.

    How Do I Replace A Mazda Cx

    Dont worry, this is pretty easy. You dont need any special hex keys you dont need to put on a pair of latex gloves and crack open the circuitry. If youve got a screwdriver and a minute to kill, you can get this done quick.

  • Remove the key ring by pressing the tiny switch and pulling on the ring.
  • Using your screwdriver, gently pop the key fob apart at the seam.
  • Pull the battery cover off with your fingers.
  • Remove the old battery and put the new one in its place.
  • Put everything back together, take it out to the car, and test it out.
  • If your key fob isnt working, then it might not be the battery. You can troubleshoot by resetting the system and testing the receiver. Theres not that much that can go wrong with the key fob, so it shouldnt take all day to figure this one out.

    Also Check: Where To Put Jumper Cables On Battery

    Just Give It A Little Just Line It Up Itll Clip Together

    But if you prefer a professional to handle it, you can always call us. Once the cover is loosened, insert the screwdriver into the gap youve created on the outside of the key fob and slide it down to the other end of the key fob to further loosen the cover until you can remove it. Without damaging the small rubber ring that the battery rests on, remove the now fully exposed mazda key fob battery.

    Light Bulb Store Near Me

    2008 Mazda Cx 9 Key Fob Battery Replacement

    Online searching for a light bulb store near me? Look no further than Batteries Plus Bulbs. Youll find an enormous selection of options for your home, vehicle, or business needs. Our associates can help advise you on upgrading to LED light bulbs, CFL bulbs, fluorescent light bulbs, and other energy-efficient options. Plus, we carry a variety of interior and exterior lighting products, as well as *smart home products like smart light bulbs, plugs, doorbells, and cameras.

    Also Check: 2012 Gmc Acadia Battery Location

    How Do You Change Battery In Car Remote

    Replace the battery in your cars key fob in 5 easy steps. To open the fob, first locate the notch. Because the notch may not be visible, this is the most difficult aspect. Step 2: Pop it open with the screwdriver. Step 3: Determine the kind of battery. Replace the old battery with a new one in Step 4. Step 5: Secure the fob.

    Why Is My Mazda Key Fob Not Working

    Its possible that your key fob has a low charge if it doesnt operate until youre close to the car. If you have a spare electronic key fob, the first thing to do is replacing the battery otherwise, you may try replacing the battery. If this doesnt work, the transmitter within the vehicle may be malfunctioning.

    Also Check: How To Change Dyson Battery

    Reprogramming Your Key For The Mazda 3

    A big disclaimer here, you need two working keys to initiate the reprogramming sequence for a third spare key.

  • Insert the first working key into the ignition slot.
  • Set the first working key’s position to on.
  • Wait for five seconds.
  • Remove the first working key.
  • Repeat steps 1-5 with the second working key.
  • Insert the new key into the ignition slot.
  • Leave it for five seconds, then turn it back to the off position.
  • Test the spare key again to see if it works.
  • S For Replacing A Key Fob Battery

    Mazda Key Fob Remote Battery Replacement – DIY

    Fortunately, its easy and quick to replace your failing Mazda key fob battery when the need arises. Youll need just the new replacement CR2025 battery, the key fob and a small flathead screwdriver. To prevent scratching, you can wrap the screwdriver tip in cellophane tape.

    • Step 1: Press the small knob on the key fob to reach the inside auxiliary key that starts your Mazda vehicle. Remove the key and put it aside while doing the battery replacement.
    • Step 2: Twist a flat screwdriver into the outer gap, sliding it gently but firmly along the opening. This allows you to remove the cover of the key fob battery.
    • Step 3: Remove the battery cap and pop out the existing nonfunctional CR2025 battery. Check the rubber ring to make sure its still attached to the cap and is free from damage.
    • Step 4: Now its time to pop your brand-new CR2025 lithium battery into place. Make sure the positive pole is facing up toward you, and then re-cover the battery cap.

    Youre done! Just slide the auxiliary key back into its cubbyhole, test the fob, and hit the road once again in your beloved Mazda.

    Also Check: Who Sells Duracell Car Batteries

    How To Open Mazda Key Fob

    To open your Mazda key fob, follow the steps below:

    • First, press the auxiliary key button on the back of your key fob. This will remove the metal auxiliary key.
    • Youll see a slot on both sides of the keys casing after the metal auxiliary key comes out.
    • Take a tape-wrapped flathead screwdriver and open the key fob case with it. Open gently by pressing the flathead into both of the slots one at a time.

    Reprogramming Your Key Fob For The Mazda 3

    If you have more than one spare key fob for the Mazda 3, that’s alright since the key fob limit for the Mazda is three.

  • Get inside the driver’s seat. Leave the driver’s side door open.
  • Press the lock button to lock and unlock the door.
  • Insert your key into the ignition.
  • Set the key to the on position.
  • Wait for two to three seconds before setting the key position off.
  • Repeat steps 4-5 three times and leave it on the off position after the third attempt.
  • Close the driver’s side door.
  • Open the door and shut it immediately. Do this three times.
  • Automatically, your car will lock and unlock the doors, signalling that it’s now ready to program a new key fob.
  • Press a button from each key fobs you want your Mazda 3 to recognize.
  • Remove the key after programming the key fobs.
  • Double-check the new key fobs to see if they work correctly.
  • For a better context of the steps in reprogramming either the key or the key fob, check out this informational video.

    Read Also: Car Battery Won’t Hold Charge

    How Do You Fix The Key Not Detected Error Of Mazda 3

    If you have this error, it could mean that your key fob for your Mazda 3 is in power-saving mode. To get your key fob out of power-saving mode, you need to press the lock button five times, and on the fourth press, you’ll notice a red glow on your key fob. With the red light on, hold down the lock key again on your key fob until you hear a beep sound.

    For a better representation of the instruction, check out this video!

    Replacing The Key Fob Of Mazda 3

    2 Button Flip Key Fob Case Shell Blade Battery Replace Repair for Mazda ...

    If you tried to replace your key fob’s battery and somehow it’s still not working or, even worse, the key fob broke during the process, you might opt to buy a replacement key fob for your Mazda 3.

    It is tempting to buy a third-party replacement solely because it is cheaper, but the chances of it working on your Mazda 3 are slim.

    In this case, we highly recommend staying away from third-party replacements and buying an official Mazda 3 key fob from one of your dealerships. It will save you a lot of time, money, and effort plus, the dealership can instantly provide you with the key fob guaranteed to work for your Mazda 3.

    Don’t Miss: Where Can I Buy Batteries

    Where To Find The Right Key Battery And How Much It Costs

    Any retail outlet or e-commerce platform that sells batteries offers the CR2025. Prices from major battery manufacturers typically range from $4 to $6 for a four-pack of key fob batteries. Discounts apply when buying in larger packs of 8, 10 or 15 batteries. You can also save on the purchase price by purchasing store-brand CR2025 lithium batteries or ones from lesser-known manufacturers.

    Changing Mazda Key Battery

    Be sure to use your owners manual as the best reference and for the most up-to-date procedures for replacing the key battery. These steps are updated for the 2016 model year. Keep in mind that other model years may differ.

  • Remove the auxiliary key by pressing the knob on the back of the key fob.
  • Take your tape-wrapped flathead screwdriver and insert it into the opening. Twist it toward the end opposite of the opening to loosen the key fob cover slightly. Once the cover is loosened, insert the screwdriver into the gap youve created on the outside of the key fob and slide it down to the other end of the key fob to further loosen the cover until you can remove it.
  • Once the cover is removed, you can remove the round battery cap. Then, remove the battery. If the rubber ring detaches during this step, be sure it does not get scratched or damaged.
  • If necessary, reattach the rubber ring before inserting a new battery.
  • Then, take your new battery, with the positive side facing the top of the key fob, and insert it into the key.
  • Replace the battery cap.
  • Replace the key fob cover, which should snap into place.
  • Lastly, reinsert the auxiliary key.
  • Don’t Miss: Battery Life On Hp Pavilion

    Related Posts

    Surface Pro 8 Battery Life

    Microsoft Surface...

    Iphone 13 Pro Max Battery Life Hours

    Understanding Iphone...