Replacing Battery In Nissan Key Fob

Share This Post

Can You Drive With A Dead Key Fob

How to replace battery in Nissan key fob

No auto manufacturer is going to pin everything on the key fob working all the time. Therefore, even if your battery dies, you can still use the fob to drive the car.

  • Despite most cars going keyless, several of them still have a key slot usually located on the steering column. It will typically be covered by a plastic cover which you can pop off. Once you insert the physical key into it, you can easily turn on the car and drive away.
  • Some cars begin ignition with the START button, which switches on the car only if the key is detected. With a dead battery, the car may not recognize the key fob and hence the START button may be unresponsive. In such cases, you can use the fob itself to push the START button, which will switch on the car.
  • Some vehicles like Fords have a slot on the steering column where you can insert the fob, which will start the vehicle.

You May Like: Car Battery Replacement At Home

S To Reprogram The Key Fob After Battery Replacement

Sometimes after the battery replacement, the key fob may not function as expected and the fob may need to be programmed.

The process to program the Nissan key fob is easy and follows the following steps.

Step 1: Open the door and then lock them to begin the process.

Step 2: Put the keys in the ignition and remove them. Repeat until the hazards flash twice.

Step 3: Put the key into the start position and turn it to the first level. The dashboard lights should come on. Note: Do not start the engine.

Step 4: Once the dashboard lights come on, quickly press a key in the key fob.

Step 5: To test if the key fob was reprogrammed, step out of the car and try to lock the doors. If it does lock, the key fob was programmed right. If it does not, repeat the process above.

How Does Nissan Fob Reprogramming Work

You may get a no key detected message. However, you shouldnt panic just yet. For some Nissan vehicles, there is an easy fix pushing the fob against the start button. If not, search for the Intelligent Key port, beside the steering wheel, to the left.

Place the key fob into the slot. Then, try igniting your car. Doing this should start and reprogram the key to recognize your vehicle.

You May Like: Gaming Laptop With Good Battery Life

Can You Start Nissan Car With A Dead Key Fob

As we have said earlier, the battery in the key fob may die at the moment you least expect it. Do not panic as you can open the doors and start the engine even with a dead key fob.

Use the emergency key at the back of the key fob to open the doors. Press the emergency key against the start button to start the car.

Changing Nissan Key Fob Battery

(2) Battery replacement for Nissan remote key fobs Altima Maxima CR2032 ...

While changing out your Nissan models key fob battery is a straightforward process, it does involve touching sensitive and fragile electronics. To avoid damage to the key fob, make sure to wear a pair of gloves . The Nissan key fob uses a CR2032 3V battery. You can usually get a multipack of these for under $5 USD. Youll also need a small flathead screwdriver.

  • Flip Nissan key fob to back side
  • Move small slider to unlock emergency key
  • Remove emergency key
  • On the top of the key fob, locate open notch between front and back halves of fob
  • Insert flathead screwdriver into notch
  • Turn screwdriver until front and back fob halves separate
  • In the back fob half, locate the dead CR2032 3V battery
  • With the flathead screwdriver, pop out dead battery
  • Insert new CR2032 3V battery + side down
  • Line up front and back fob halves
  • Squeeze them back together until everything clicks into place
  • Replace emergency key into its slot
  • Move slider back into place to secure emergency key

More How-To Guides

Don’t Miss: Charge Car Battery How Long

How To Change A Nissan Key Fob Battery

Similarly, What kind of battery does a Nissan key fob take?

3V CR2032 battery

Also, it is asked, How do you change the battery in a key fob Nissan?

Nissan Key Fob Battery Replacement Your key fobs secret key must be removed. Remove the old battery from the key housing, but keep track of its location inside the housing. Replace the battery and ensure that the negative side of the battery is facing you in the same direction as previously.

Secondly, How do you open my Nissan key remote to put in a new battery when I dont see the battery?

What youll need to accomplish is: Push the little release latch after flipping the key fob over. Take the secret emergency key from the fobs bottom. To enter, insert the key into the drivers side door and open it.

Also, How much does Nissan charge for key fob battery?

How much does a Nissan key fob battery cost? A new battery for your Nissan Kicks or Maxima may be found for $2 to $5 at practically any shop or online. Expect to spend up to $10 for the identical battery at your dealership, plus a cost to have it replaced for you.

People also ask, Can I start my Nissan without a key fob?

If its only the Nissan key fob battery that needs replacing, you may be able to start your Nissan even if the key fob battery is dead: If your Nissan vehicle, truck, or SUV has a key fob port, just insert the fob and press the START/STOP button while tapping the brake pedal or clutch.

Related Questions and Answers

Reassembling The Key Fob

When you replace the Nissan key fob battery, instant reassembling is vital. You dont want dust or other particles to accumulate inside the compartments. Also, you can only confirm if your replacement project is accurately done when you reassemble the key.

If your key requires first putting the valet back in its place, do that. Some other keys may put the backup key even after the fob has been assembled.

Align and close the two halves of the key fob, pressing them together till it snaps back into place. Dont apply too much pressure to avoid breaking anything.

Recommended Reading: Solar Panel Battery Bank Cost

The Battery On The Nissan Smart Key

For many years now, Nissan has been using Smart Keys instead of standard ignition keys for their vehicles. The Nissan Intelligent Key System allows drivers to lock and unlock the car doors at a distance, open the trunk, and start the car with the push of a button.

As the automotive industry moves more and more towards technology like Smart Keys, there are always concerns that come along with the progress. For example, what are you supposed to do if the battery in the Nissan Smart Key dies? What kind of battery does the little key fob even take?

All modern Nissan cars, trucks, and vans use the same Smart Key fob and, therefore, the same battery. Inside each Nissan key fob, you will find a single CR2032 3-volt disc-shaped battery. You can find these batteries in most places where batteries are available for sale or in online marketplaces like Amazon.

While this battery size is the type you’ll find in most Nissan Smart Keys, there is a chance you could have a variation, especially if you are driving an older Nissan. So, always match the old battery you are removing from the key fob with the new one.

Changing The Battery In Your Key Fob

Nissan Key Fob Battery Change – How To DIY Learning Tutorials

Now that you’ve had a chance to go to the store to purchase a new battery, the procedure to replace it is simple.

  • Remove the hidden key from its place in the key fob
  • Remove the rear key housing and remember its position
  • Remove the old battery and pop in the new battery
  • Make sure the negative side faces you
  • Clip the rear piece back on and insert the emergency key

Also Check: Prius Battery Dead After Sitting

How To Start A Nissan If The Key Doesnt Work

Press the brake, and press the start button. Nothing happens. Nissan didnt even crank. If your push button is not starting the car, follow these troubleshooting steps: Check the main battery.Check key fob batteries are in good condition.Faulty brake switch. If you are sure that the car battery and key batteries are in good condition, next you should check the brake switch.

How Do I Replace My Nissan Key Fob Battery

The process of changing your battery may be unique to other vehicles from the same manufacturer, so you’ll want to refer to your owner’s manual before removing your current battery. You also want to take note of what specific battery type and size you need to have on hand before replacing your key fob battery.

Release the mechanical key inside of your fob using the release latch on the fob.

A small, flathead screwdriver will help remove the cover to the battery compartment. Before you remove the battery, take note of which direction the positive and negative sides are in.

Replace the old battery with a brand new battery. Pay close attention to ensure that you’ve put the correct side of the battery in first.

Regardless of what model you’re replacing the battery for, you can generally use these instructions as a guide for the process. If you’re having trouble or are confused with the process, feel free to contact ABC Nissan for more information. You can also bring your Nissan key fob into our service department for assistance.

Don’t Miss: How Much Does It Cost To Replace Electric Car Batteries

What Happens When The Key Fob Battery Is Low

Typically, a key fob with a low battery starts exhibiting some or all of the following symptoms:

  • The fob may become less responsive or unresponsive over time.
  • It may not lock/unlock your car easily and may start losing its range. You may have to get closer for the keyless entry function to work.
  • In cars with a push-button start, the car may not recognize a key fob when the battery is weak

My Nissan Rogue Key Fob Does Not Have A Hidden Key How Do I Change That Battery

How To Replace Battery In Nissan Murano Key Fob

Some Nissan remotes for the Sentra, Rogue, and Nissan Versa do not have smart keyless entry. The process to change the battery is the same except that you place the screwdriver in the single slot at the top of the fob case and twist. Match the new battery type to the one you are removing to ensure proper function.

Recommended Reading: Battery Replacement Chamberlain Garage Door Opener

What Size Battery Does A Nissan Key Fob Take

Posted on October 27, 2021

Nowadays, all new Nissan vehicles come with a remote keyless system. You dont need to physically use a key to start your engine or unlock your door with this system. Having a Smart Key as Nissan uses is nice, but what do you do if it runs out of battery power? With so many micro-battery sizes on the market, knowing which size to purchase for your Nissan intelligent key is challenging. Luckily, weve researched the batteries and replacement process to provide you with an answer here.

All Nissan Smart Keys use the same battery size: CR2032 3-Volt. To change the battery in your key fob, follow these steps:

  • Remove the valet key by pressing the small button on the back of the fob.
  • Using a screwdriver or card, gently pry open the fob until it clicks and is in two pieces.
  • Remove the battery and insert the new one.
  • Reassemble the key fob and replace the valet key.
  • Thats an overview of the battery size for Nissan Smart Keys and how to replace them. But, there is more that you need to know about this process. In the remainder of this post, we will discuss how to change the battery in more detail. Additionally, well discuss how long the batteries should last, programming the Nissan key fob, and whether or not they qualify for a warranty.

    Before you continue reading, let us say we hope you find the links here useful. If you purchase something through a link on this page, we may get a commission, so thank you!

    How Do I Know If My Battery Is Bad In My Key Fob

    Here are a few of the indicators that indicate its time to change your fob battery. Signal intensity has decreased. In many situations, todays fob keys can transmit a signal to the car up to 50 feet away. The doors had to be unlocked with many clicks. The key fob does not always operate correctly.

    Read Also: Best Battery For Resmed Airsense 10

    Nissan Key Fob Not Working After Battery Change: A Complete Guide

    These days, keyless entry for cars and other vehicles using a key fob is popular. For automobile owners, its a comfort and convenience to open cars without needing keys. But what happens if your Nissan key fob breaks down? It occasionally does this, especially following a battery change. So, you ask, why is my Nissan key fob not working after a battery change?

    A battery change could cause your key fob to stop functioning because the electronic system in the key fob automatically resets when the battery is changed. Other causes could be broken connections and button misalignment. The frequent next step to take is to reset it.

    Follow this guide to reset your Nissan key fob after battery replacement. Youll soon get back on track if you follow these easy instructions!

    Why Our Key Services

    How To Replace A 2007 – 2013 Nissan Altima Key Fob Battery

    Your vehicle gets you reliably where you need to be, but without a working key fob, getting around is a lot more difficult. Some newer vehicles won’t even start without one. Whether youve misplaced your keys, you need a new key cut, your existing fob is damaged, or you just want a spare, have your key fob repaired, re-powered or replaced at Batteries Plus Bulbs.Our experts will help you with a simple battery replacement or give you a whole new keyless entry replacement if yours stops working. Contact us online or come visit a store near you for fast service even without an appointment.

    Recommended Reading: Nissan Leaf Battery Replacement Cost

    Nissan Key Fob Battery Change

    When you replace the battery in your Nissan smart key, you can go back to the ease of entering and starting your vehicle with the key fob. Here are the steps to take to replace the battery in your key fob:

  • Remove the hidden key used to get into your Nissan when the battery died.
  • Remove the key housing as well as the old battery.
  • Replace the CR2025 battery with the negative side facing up.
  • Put the key fob back together and test it out!
  • How Long Do Key Fob Batteries Last

    Because key fob batteries are only used passively to rarely open locks or make connections with your vehicle, they last a very long time. Estimates for batteries like the CR2032 are usually greater than 20,000 hours of use. To put that into perspective, thats over two years of useful life.

    Some similar batteries by Panasonic even have a 10-year shelf life to give you some idea of their longevity. Of course, shelf life means that the batteries are not used during the period of measurement.

    Read Also: Where To Sell Used Car Batteries

    Read Also: Adt Panel Battery Dead/miss

    How To Open Nissan Key Fob

    When unopened, your Nissan key fob is made up of two main components which are conveniently stored together. The small security hardware device and a physical key to get you out of binds when there may be an issue with the device.

    To then open the Nissan key fob device we need to firstly turn the fob onto its back. You will see a small switch which you can push up to release the internal grip on the key simultaneously pull the physical key out from the casing.

    Once the key is released, you can put it to the side and continue to opening up the casing.

    Looking front on to the gap left by removing the physical key, you will see two tiny slots to help pry open the casing. These are shown below where the screw drivers are touching.

    Using the flat head screw drivers from your mini screw driver set, simply insert the end into one of the slots and turn 90 degrees to pop it open. Perform the same action to the other slot to pop open the other side of the case. If the case does not completely open, it may require some gentle additional prying on either side.

    The casing will then open into two parts, one side containing the battery and the other containing the circuitry. You can place the side with the circuitry to one side as you work on the side with the battery.

    Background: What Functions Are On A Nissan Key Fob

    replace battery on nissan key fob

    First lets be clear on the key fobs themselves. Broadly speaking, there are two versions that are still commonly in use in 2021. There is a simpler, 4-button key fob that simply locks and unlocks the car, as well as opens the trunk and includes a panic alarm, too. The newer generation added a remote start button, bringing the total to 5 buttons. They also introduced a blinking light that indicates the battery is working and power is flowing in the key fob.

    The 5-button key fob also helps the Nissan owner manage certain security functions on their vehicle. Its primarily designed to be a fob that just sits in your pocket or purse and allows you to open and lock the doors keylessly, as well as start the car.

    The effective range of these keyless features is about 2.5 feet. A button on the door handle can lock and unlock the car when the fob is close, and the cars push-button start will activate only when the key fob is close, too.

    A family running a Nissan vehicle together can register up to 4 keys on each car. The key fobs are saved as profiles in the Nissan infotainment system and can be used to allow drivers to create and save their own personal settings which are then activated when the key fob opening and starting the car is identified.

    Don’t Miss: Hyundai Key Fob Battery Replacement

    Related Posts