How Long Does The Battery In A Jeep Grand Cherokee Last
The batteries of your Jeep Grand Cherokee may last between 3 and 5 years. 2020 Jeep Grand Cherokee batteries usually last 3-5 years, however, this varies dependent on driving behavior, weather conditions, battery type, and other factors.
You may extend the life of your Grand Cherokee battery by starting your 2020 Jeep Grand Cherokee regularly.
Pop The Jeep Key Fob Open With A Screwdriver
Since it is made of plastic that snaps together, you will need a flathead screwdriver to open your key fob and access the battery. To do this, insert the screwdriver tip into the key fobs seam . Some Jeep owners prefer to use a pry bar tool.
For some Jeep models like the Jeep Renegade, it is necessary to remove the pull-out metal ignition key first before popping the key fob open. Do this by locating the metal switch on the key fob and sliding it over to release the metal ignition backup. Once pulled out, set the metal ignition key aside in a safe place.
How To Program A Jeep Key Fob
Programming a Jeep key fob is similar to programming other key fobs. First, you need to get in the vehicle and lock all the doors, including the convertible. It can help you avoid issues when reprogramming the key fob.
Next, you will enter the vehicle key into the starter and maintain it in the off state. Then it would be best if you left your drivers side door to stay partially open. Keep in mind that you need to switch the key on to start when the door is open.
While the key is turned, push and keep the lock button on the key fob for about five to six seconds. The operation will be completed when you release the button and remove the key from the circuit.
In addition, there are several key fob programming tools on the market. They are simple DIY gadgets for programming car keys. This basic instrument is a gadget that fits into the electronics of the Jeep and allows you to install fresh key fobs.
Don’t Miss: Places To Buy Car Batteries
The Unlocking Process Is Delayed
Although you may only need to click the button once, there is a considerable one or two-second wait before hearing your car unlock.
This is also an indicator that the battery in your key fob is running low. According to some accounts, when you unlock your automobile, the headlights may fail to flash.
It may appear innocuous today, but youll be in grave danger if your key fob abruptly fails to work.
How Long Does A Battery Last In A Key Fob
When purchasing a brand new Jeep Wrangler, you will get a pair of key fob with brand new batteries. There is no definite time for the battery to last, but my rough estimate is around 3 to 4 years. It all depends on how many times you use the key fob every day, contributing to battery usage.
However, since the key fob usually comes in pair, I suggest that you use the two alternately to save battery power for a while. But if worse comes to worst, then changing the key fobs battery will be needed once the battery will be finish. I tell you, it is an easy thing to do that I can say that even teenagers can do it.
Recommended Reading: Mazda Cx 5 Battery Replacement
May Be Replacing One Key Fob Battery
Black Cherokee Sport 4×4 i4Current Mileage:
wpgguy said:Hopefully yours is just the battery. I’ve noticed both of mine are fairly intermittent. Sometimes it’ll work, other times I can stand beside the car and nothing happens . I can hammer the buttons and eventually it’ll start responding again after maybe 10-20 seconds of nothing. I havent bothered taking it in, just chalked it up to be possible interference or maybe the Jeep just doesn’t like me.
rumrunner said:just got oil changed at dealer. they tested the finicky fob, report that it works fine and can’t explain why it’s intermittent. passed battery and antenna test. in fact antenna test reports exact same as the good fob. no report about the wire crimp recall I mentioned when I arrived. no mention about the software flash for the key fob the guy mentioned last time. and they rotated the snows even tho I didn’t ask them to. guys says ok we’ll take charge off and rotate them back. oy meanwhile 2 hrs later …
JeepCares said:Hey rumrunner–sorry to hear about this, and glad they are getting a new fob for you. Do you want me to check for any active recalls? You can also go to recalls.mopar.com to check any closed or open recalls as well.Kori
How Do You Open A Jeep Key Fob
I need to change my Jeep key fobâs battery, but Iâm scared of breaking it! How do you open a Jeep key fob?
To change the battery in a Jeep Cherokee key fob:
- Slide the latch that releases the key from your fob and remove the key
- Use a flathead screwdriver or the key itself to gently pry open the fob
- From there, you can remove the button panel and circuit board to access the battery, which you can slide out
- Insert your new battery and reassemble the Jeep key fob
Don’t Miss: 2014 Chrysler 200 Battery Location
How To Replace The Jeep Grand Cherokee Pear
Assuming you have a Jeep Grand Cherokee with a pear-shaped key fob, heres how to replace the battery:
1. Locate the release button on the back of the key fob.
2. Use a small flat-head screwdriver or a nail file to pry open the back of the key fob.
3. Remove the old battery and dispose of it properly.
4. Insert the new battery, positive side up.
5. Snap the back of the key fob closed.
Thats it! Youve now successfully replaced the battery in your Jeep Grand Cherokee pear-shaped key fob.
Jeep Key Fob Battery: Everything You Need To Know
If you need to press the buttons on your Jeep key fob several times or it isnt working at all, the problem could be your key fob battery. Jeep key fob batteries usually last between three and four years under normal use.
Replacement fobs can get expensive and need to be programmed. Replacing the Jeep key fob battery can be simple and a lot more affordable than replacing the entire key fob.
What kind of battery goes in a Jeep key fob?
Key fobs use small coin-type batteries. The number of your key fob battery will be printed on it. One common key fob battery is CR 2032. Depending on your Jeep model and year, your key fob could use a CR 2032, CR 2025, or a CR 2450 battery.
Read Also: 2017 Honda Crv Battery Replacement
How Do I Change The Battery In A Jeep Key Fob
If you own a Jeep, chances are youve had to change the battery in your Jeep key fob at some point. Its not a difficult process, but its one that requires a bit of attention to detail. Heres a step-by-step guide to changing the battery in your Jeep key fob.
Step-1. Start by removing the key fob from your key ring. Most Jeep key fobs have a small release button that you can press to detach the fob from the key ring.
Step-2. Once the key fob is detached from the key ring, take a look at the back of the fob. Youll see a small screw that holds the back cover in place. Use a small screwdriver to remove the screw and then pry the back cover off of the key fob.
Step-3. With the back cover removed, youll see the battery inside the key fob. Take note of the orientation of the battery and then remove it from the key fob.
Step-4. Install the new battery in the key fob, making sure to orient it the same way as the old battery.
Step-5. Once the new battery is installed, replace the back cover and screw it in place.
Step-6. Reattach the key fob to your key ring and youre all set!
Using Multiple Wireless Devices
The jeep is the place where we tend to keep our electronics, but having multiple wireless devices in the vehicle can ensure quality riding, commuting, and jeep anti-theft system.
When youre driving, especially on the highway in Sport mode, distractions are everywhere by text messages, social media alerts, and news updates. All wireless devices like wifi, radio, and Bluetooth use different frequencies to keep the system alive.
Sometimes, the key fob faces problems in ensuring its services among all the frequencies. So, it could be one of the causes of key fob problems in jeep Cherokee, Grand Cherokee, Rubicon, or Willys.
Also Check: Does Autozone Buy Old Batteries
How Do You Change The Battery In A 2019 Jeep Wrangler Key Fob
If you own a 2019 Jeep Wrangler, then you know that the key fob is an essential part of the vehicle. The key fob not only allows you to unlock and lock your doors, but it also has a panic button that can come in handy in an emergency. The key fob also has a built-in flashlight that can be useful when youre trying to find something in the dark.
The battery in the key fob is what powers all of these features, so its important to know how to change it when it starts to die. Fortunately, changing the battery in the Jeep Wrangler key fob is a pretty simple process that anyone can do.
First, youll need to locate the battery cover on the back of the key fob. The battery cover is usually located near the bottom of the key fob. Once youve found the battery cover, youll need to use a small flathead screwdriver to pry it off.
Once the battery cover is off, youll be able to see the battery inside. Youll need to use a small flathead screwdriver to disconnect the battery from the key fob. Once the battery is disconnected, you can then remove it from the key fob.
To install the new battery, simply reverse the process. Start by connecting the new battery to the key fob and then replace the battery cover. Once the cover is back on, your key fob should be as good as new!
Signs Of A Weak Keep Key Fob Battery
You can tell the key fob is getting weaker by the day by the following:
- The distance between the car and the key fob is getting shorter and shorter for it to work
- The key light in the instrument panel flashes after the car has been turned off
- The keys have to be pressed many times to respond.
- The key fob responds inconsistently.
Recommended Reading: Solid State Battery Vs Lithium
How To Change Battery In Jeep Wrangler Key Fob
If your Jeep Wrangler key fob starts to act up, it might be time to change the battery. Heres a quick and easy guide on how to do just that:
1. Start by removing the key fob from your key ring. Youll need to access the back of the key fob in order to change the battery, so make sure its not attached to anything else.
2. Once you have the key fob in hand, locate the small screw on the back. This is usually located near the bottom of the key fob.
3. Use a small screwdriver to remove the screw. Be careful not to lose the screw, as it can be difficult to find if it falls on the floor.
4. With the screw removed, you should now be able to pry open the back of the key fob. Be careful not to damage the back panel, as youll need to put it back on later.
5. Once the back panel is off, youll be able to see the battery inside. Its important to note which way the battery is installed, as youll need to put the new one in the same way.
6. To remove the old battery, simply lift it out of the key fob. You can now install the new battery by placing it in the key fob and pushing it down into place.
7. Once the new battery is in place, you can put the back panel back on the key fob. Make sure the back panel is snapped into place, then replace the screw.
8. Thats it! Youve now successfully changed the battery in your Jeep Wrangler key fob.
Weak Or Dead Jeep Battery
Without a working battery, you can not drive to a nearby dealer to purchase new batteries thats why a Jeep battery is a critical part of the vehicle.
When your vehicle battery is weak or dead, all the electronics systems fail to run until you fix it. Sometimes, a weak battery will not allow you to run a key fob system in your jeep.
Read Also: Car Battery Replacement At Home
What Is The Average Lifespan Of A Jeep Compass Key Fob Battery
This is a question that we get all the time here at Jeep Compass Forum, and its one that weve been trying to answer for a while now. The average lifespan of a Jeep Compass key fob battery is about two years. However, there are a few things that can affect this number.
First, lets talk about what a key fob battery is and what it does. A key fob battery is a small, lithium ion battery that is used to power your Jeep Compass key fob. This battery is what allows you to remotely unlock your doors, start your engine, and do other cool Jeep Compass features.
Now, the lifespan of your key fob battery will depend on a few factors. First, how often do you use your key fob? If you use it multiple times a day, then your battery will obviously die faster than someone who only uses it once a week.
Another factor that can affect the lifespan of your key fob battery is the temperature. If you live in a cold climate, your battery will die faster than someone who lives in a warm climate. This is because cold temperatures cause the battery to lose power faster.
Finally, the type of battery you have in your key fob can also affect its lifespan. There are two different types of batteries that are commonly used in key fobs: CR2032 and CR2025. The CR2032 battery is the newer of the two and it has a longer lifespan than the CR2025 battery.
So, if you want your key fob battery to last as long as possible, use it sparingly and keep it in a warm place.
S For Replacing A Jeep Key Fob Battery
Before getting started with replacing your key fob battery, gather the supplies and equipment youll need. Essential items are:
- A replacement battery
- A small flat-head screwdriver
Once youve gotten together the items you need, insert the tip of your flat-head screwdriver into the key fob seam by your key ring mount. Press down gently to separate the top and bottom pieces of plastic. Be careful not to twist the screwdriver head because it could break the plastic. In certain Jeep models, youll also need to remove the emergency key before proceeding.
Open the top and bottom pieces. Youll see the old battery, a circuit board, and a rubber keypad. Remove the old battery from the housing.
Take care to note which side of the battery is facing up. Replace the new battery in the same orientation as the old battery. Usually, the negative side of the battery will face down.
Put the circuit board back in the keypad, then replace the keypad. The last step is snapping the two key fob halves, top and bottom, back together.
You wont need to reprogram your key fob if just replacing the key fob battery. However, you can find key fob reprogrammers at auto supply dealers.
Don’t Miss: Interstate Batteries Srm-24 Marine/rv Deep Cycle Battery
How To Replace The Battery In Your Jeep Wrangler Key Fob
It’s easy to replace the battery in your remote key fob. The fob is made of two plastic parts that snap together. Inside is a small circuit board, a rubber key pad and a battery.
To replace the battery, follow these steps:
Tools you’ll need to complete this project:
- Small flathead screwdriver
- New CR2032 Battery
Tips:
When separating the two halves of the key fob, don’t use a twisting action or you could damage the plastic. Pressing down works the best. It’s easiest to place the half with the battery on top of the half with the circuit board and keypad.
Wrong Key Fob Programming
Key fobs are small, portable, and fantastic devices that allow owners to control a vehicle remotely. A fob has two main functions: it must be able to store a security code that provides access to the jeep, and it must transmit that code to the vehicle to unlock the doors.
So, the key fob is all about programming. If something is wrong with the security code of the vehicle, the whole key fob system is abortive.
Recommended Reading: What Voltage Is Motorcycle Battery