Battery For Audi Key Fob

Share This Post

Audi Q5 Mk 1 Key Battery Replacement

Audi Key Fob battery change – (US) Key battery DIY

Use this technique to replace the key fob battery for the Audi Q5 / SQ5 first generation . An indication that the battery requires replacing is if the check light in the key no longer illuminates when a button on the master key is pressed.

Additionally, a warning light will illuminate on the dashboard display informing you that the battery requires replacing. The message: Please change key battery may display.

  • Remove the mechanical key from the master key fob by pressing the release button , then pull the mechanical key from the master key in the direction of the arrows.
  • Remove the battery holder from the master key by pressing the release button whilst at the same time pull out the battery holder in the direction of the arrow.
  • Remove the dead battery and replace with a new CR 2032 with the + sign facing down.
  • Reinsert the battery holder and click in place.
  • Reinsert the mechanical key and click in place.
  • Press a button on the remote key fob and check that the LED illuminates as confirmation.
  • How To Perform An Audi Key Fob Battery Replacement

    There are different kinds of Audi keys, and therefore, there are different kinds of Audi key batteries, which means that the process will be a little different to replace the battery on each kind of fob. Nevertheless, La Crosse Audi has broken down the process into an easy-to-read guide that any Holmen driver can follow:

    How To Replace An Audi Key Fob Battery

    If you ever have trouble locking or unlocking your Audi vehicle remotely, then it could be due to a faulty battery in your key fob. If this is the case, then all you have to do is replace the Audi key battery, and you’ll be ready to unlock and lock your Audi with the click of a button. Learn how to perform an Audi key fob battery replacement with the service team at La Crosse Audi, and visit our service center near Winona for all of your service needs.

    Read Also: Best Company To Recycle Scrap Lead Acid Batteries

    How To Change Battery Audi Car Key

    As an Amazon Associate, I Earn From Qualifying Purchases.

    Last Updated on August 11, 2022 by Ellis Gibson

    If youre an Audi owner, you know the importance of having a working key fob. After all, its your key to getting into and starting your car. But what do you do when your key fob battery dies? In this article, well give you some tips on how to change your Audi key fob battery and get you back on the road in no time.

    So, how to change battery audi car key?

    If your Audi key fob has a dead battery, youll need to replace it. To do so, follow these steps:

    1. Remove the key fob from your key ring.

    2. Using a small flathead screwdriver, pry open the key fob case.

    3. Remove the old battery and insert a new one. Make sure the positive side is facing up.

    4. Close the key fob case and reattach it to your key ring.

    5. If your key fob has a transponder chip, youll need to have it programmed by an Audi dealer.

    Lets dig into it and see if we can get to the bottom of it.

    # Table of Contents

    You May Like: 2022 Bmw 5 Series Images

    Can You Unlock Your Car With A Dead Key Fob

    4 buttons 315mhz remote key fob with battery for audi a3 a4 a5 quattro ...

    Yes! Having a dead battery in your car key fob does not mean that you are left stranded. Car manufacturers have foreseen this situation and built in fail-safes to ensure you can unlock your car even in such a situation.

    Heres what you should do:

    • All car manufacturers include a mechanical key in the cars key fob. This can be accessed by sliding/pressing a small button usually located on the side of the key fob, which will remove the fob cover.
    • Once you get the mechanical key out of the fob, insert it into the key slot and turn it to unlock/lock your car.

    Mechanical keys are usually included in the key fobs of all major car manufacturers like Honda, Kia, Toyota, Mercedes, Ford, etc.

    Also Check: Iphone 13 Pro Max Battery Size

    When To Replace Your Key Fob Battery

    How long your key fob battery lasts depends on several factors such as how often you use it, your climate, and if the battery has been replaced before. A new key fob battery should, on average last a few years before you need to replace it. If you recently replaced your key fob battery and the key fob is still not working correctly, the problem is likely with the key fob itself.

    Recommended Reading: Does Advance Auto Install Batteries

    Specialty Batteries Near Me

    Were so much more than just one of those places that sell batteries. Visit any one of our stores for access to more than 60,000 unique batteries, light bulbs, and accessories. We offer unmatched service to consumers, businesses, and government entities at the national and local levels. Our friendly staff will help you find the boat battery, motorcycle battery, or car battery youre looking for, as well as additional options for snowmobiles, laptops, UPS systems, watches, lawn equipment, scrubbers, golf carts, maintenance equipment, industrial use and more.

    Don’t Miss: Interstate Batteries Srm-24 Marine/rv Deep Cycle Battery

    How To Change The Battery On An Audi Key Fob

  • Use a flat screwdriver to separate the case into two halves.
  • The battery inside the case does NOT have the flip metal key.
  • Use the screwdriver again to separate the shell.
  • Remove the CR1620 button cell battery. Pay attention to the positive side of the battery.
  • Press the new battery in the housing.
  • Press the shell together until you hear it snap.
  • Press the two halves together, and you are done changing your Audi key battery.
  • If the lock/unlock feature does not work after changing the battery, insert the key into the drivers door. Turn the key to the lock and unlock position to make the car recognize your key fob. Remove the key fob from the door and press unlock.
  • Battery Size: CR1620

    Types Of Batteries Used In Key Fobs

    DIY – How to replace remote fob battery in Audi A4, A5, Q7 and TT

    There are several types of batteries used in Audi key fob battery replacement. One of these types is the lithium-ion rechargeable battery, or Li-Ion. Lithium-ion batteries are generally smaller in size than their CR counterparts, but have much higher discharge rates and higher capacity. These batteries are also commonly labeled as CR2025.

    The battery in an Audi key fob is a small circular lithium-ion battery called a CR2032. These batteries are commonly used in watch batteries and electronic devices. This type of battery is relatively easy to replace and is available at most stores and even on the internet. CR2032 batteries can also be used in a conventional key fob. In order to replace the battery, youll need a Phillips head screwdriver and a flat object to get the job done.

    If the key fob battery is not performing well, you can do a Audi key fob battery replacement in the comfort of your own home. Audi Q5/Q7 models come with a key fob that is equipped with a battery that requires replacement. Changing the battery is a simple process that can save you time and money without the need for an appointment with an Audi dealership. It is also possible to replace the battery in your key fob if it dies while driving, which can result in a more frustrating experience.

    Recommended Reading: How To Optimize Iphone Battery

    How Do I Replace My Audi Key Fob

    If youre like most people, you probably dont think about your car key fob until you need it. And when you need it, you really need it. So what do you do when your Audi key fob stops working?

    First, try these troubleshooting tips:

    Check the batteries. This is the most common issue with key fobs.

    Clean the contact points. Over time, the contact points can get dirty and cause the key fob to stop working.

    Try resetting the key fob. This can sometimes solve the issue.

    If these troubleshooting tips dont work, then youll need to replace your Audi key fob. Heres how to do it:

    1. Order a new key fob. You can order a new key fob from your local Audi dealer or from an online retailer.

    2. Program the new key fob. Once you have the new key fob, youll need to program it to work with your car. This can usually be done by your local Audi dealer.

    3. Enjoy your new key fob!

    Replacing your Audi key fob is a pretty simple process. But if youre having trouble, be sure to contact your local Audi dealer for assistance.

    Do I Need To Reprogram The Key Fob After Changing The Battery

    Typically, you do not need to reprogram the key fob after changing the battery. However, if youve replaced not just the batteries but also some of the internal wiring and electronics, you may need to reprogram it by pairing it with your vehicle once again.

    The usual sequence for reprogramming your car battery is as follows:

    • Put the key into the ignition
    • Turn the key into the ON position and then turn it back to the LOCK position.
    • Do this several times until you hear a chiming sound
    • Press the lock and unlock position on your key fob to reprogram it. This should ensure the correct functions are saved and that the vehicle will respond the next time you use it.

    Recommended Reading: 2007 Lexus Es 350 Battery

    When Should I Replace My Audi Key Fob Battery

    Keep an eye out for the following warning signs that your Audi’s Key Fob battery may need to be replaced:

    • Difficulty Starting: Does it take several minutes for your Audi vehicle to turn on or multiple times to start? This could be an indicator of a low battery.
    • Difficulty Opening/Locking Doors: If you are unable to lock and unlock your doors or employ the panic alarm, this is a sure sign that your Audi key fob battery is on the fritz and may need to be replaced soon.
    • Visible Warning Light: In some vehicles, you may notice a warning sign on your dashboard that indicates an issue with the charging system. This can mean your key fob is losing battery power.

    If you notice any of the low battery warning signs above, it’s a good idea to have the battery checked at a qualified specialist workshop, like our Walter’s Audi service center. Our team of trained technicians can help you identify the type of key fob you have and order the appropriate Audi key fob replacement battery if we don’t already have one in stock.

    Contact us at Walter’s Audi serving Los Angeles and Orange County today for professional and timely Audi key fob battery replacement!

    What Is A Key Fob

    Other Parts &  Accessories

    A key fob sometimes called a remote keyless system is a handheld device that allows you to lock and unlock your vehicle remotely. It consists of a remote control and RFID antenna that is connected to your cars locking system. Some key fobs have a retractable physical key with which you can lock/unlock your car manually as well.

    You May Like: 2013 Chevy Traverse Battery Location

    Audi Flip Key Battery

  • Use a flat screwdriver to separate the case of the fob into two halves.
  • Take the side with the flip metal key in it and set it aside for now.
  • Take a screwdriver to separate the shell of the other half.
  • Take out the battery.
  • Insert the new CR1620 battery into the same spot as the old battery.
  • Press the shell on until you hear a snap.
  • Put the two halves of the key back together.
  • Although replacing your Audi key battery is pretty straightforward, we understand if you would rather have our professionals take care of it. To do so, schedule service at our service center near West Salem.

    How Does Key Fob Work On Audi

    We said earlier that a key fob is an electronic remote system, so, Key fob uses radio tides to transmit with a reader in the vehicles door lock that it is programmed to open.

    Key fob uses a system that is called a radio frequency identification system. , which works as an electronic code for identification reasons.

    In some aspects, it does the same objective as a barcode on your bank credit card.

    However, the key fob does not have to be very close to the car before it works.

    When the fob is in a close region to the car, the locking cog within the entrance unlocks and grants entry to the person with the fob.

    The ease of using the car fob only continues if the fob is in good condition and the battery is functioning, if the battery stops working, then you have to change it and get a new battery into it.

    You May Like: Iphone 13 Pro Battery Percentage

    Replacement Audi Keys & Key Fob Batteries In Westmont

    Need a new Audi key fob battery? Lost your current Audi key fob and need a new one? The Parts Department at Audi Westmont has replacement Audi keys and replacement key fob batteries in stock and available to purchase.

    Our team will gladly help you replace your battery and get your key fob configured with your vehicle again. Feel free to stop by our Audi Parts Department in person or give us a call if you have any questions.

    Frequently Asked Question On How To Battery In Audi Key Fob

    Audi A3 key fob BATTERY REPLACEMENT

    1: My Audi Key Fob Is Not Working After I Changed The Battery.

    This may happen because you placed the battery in the wrong position, Open the key fob again and this time make sure that the battery is inserted in the right way. Make sure that the positive end of the battery is inserted on the required side.

    2: Does The Car Dealer Have To Re-Program The Key?

    The key will work automatically, and no programming is needed after changing the battery. If your key fob does not work well after changing the battery, try one of the following:

    • Open the fob using the metal key. Then, press the unlock switch on the remote. Get into the car and ignite the car. Lastly, remove the car key from the ignition.
    • If the above synchronization method does not work, open the fob and check if the positive end is inserted properly.

    3: Can I Change The Case Of The Key Fob?

    Yes. You can change the case, if your key fob has been damaged or the case is broken, you can replace just the case. New Audi key cases can be bought online.

    4: Can I Recharge My Audi Fob Battery When It Drains Out?

    No. Audi fob batteries are not rechargeable, although you can get a reachable battery it is not advisable. It is okay, to use rechargeable batteries. Just remember that you need to remove and recharge the battery or replace it when the battery is down.

    5: How long will it take to change the fob battery?

    Changing the fob battery is very easy and should only take few minutes, lets say 5- 10 minutes is enough.

    You May Like: 10kw Solar System With Battery Backup

    How To Change The Battery On Audi Smart Keyless Entry Remote

    This key fob has been used in many Audi cars since 2008, including A, Q, R, S, and TT models. If your Audi key fob battery is too weak or dead, it will prevent you from starting the car using the Start/Stop button.

  • Use your thumb to press on the key release found in the chrome part of the key.
  • Pull the metal key blade from the shell.
  • Press the exposed plastic with your thumb and pull it out of the shell.
  • Remove the battery from your Audi key fob. Pay attention to the positive side of the battery.
  • Install a new battery into your Audi key fob. The positive should be facing the plastic side.
  • Press the battery holder and the metal key into the shell.
  • Battery Size: CR2032

  • Flip the metal key open.
  • Use a small screwdriver to press the back cover of the key.
  • Pry out the back cover at the end of the keyfob.
  • The battery is inserted into the back cover. Pry it out and pay attention to the orientation of the positive side of the battery.
  • Press the new battery on the back cover.
  • Press the back cover into the Audi key fob.
  • Battery Size: CR2032

    Over the years, Audi has come out with a few different key designs. These instructions were written to help owners change the key fob battery on Audi models such as the A3, S3, RS3, A4, S4, A5, S5, A6, S6, A7, S7, RS7, A8, S8, Q3, Q5, SQ5, Q7, TT, and R8.

    Audi Q5 Mk 2 Key Battery Replacement

    Use this technique to replace the key fob battery for the Audi Q5 / SQ5 second generation .

    If the LED on the key fob no longer illuminates when a button is pressed, it means the battery is dead and requires replacing. The vehicle key low battery warning light may also illuminate along with a message warning that the battery is low.

  • First remove the mechanical key from the fob by pressing buttons and pulling the mechanical in the direction of the arrow.
  • Now youll need to remove the battery holder by pressing buttons and pulling in the direction of the arrow.
  • Remove the old battery and insert a new CR 2032 battery with the + facing down.
  • Slide the battery holder back into the key fob and click in place.
  • Reinsert the mechanical key until it clicks in place.
  • Press a button on the remote key fob and check that the LED illuminates as confirmation.
  • More about the Audi Q5

    Recommended Reading: 2012 Gmc Acadia Battery Location

    Related Posts