Key Fob Battery Replacement Nissan

Share This Post

How Do I Replace My Nissan Key Fob Battery

2010 – 2020 Nissan Leaf Key Fob Battery Replacement – and Improvement!

The process of changing your battery may be unique to other vehicles from the same manufacturer, so you’ll want to refer to your owner’s manual before removing your current battery. You also want to take note of what specific battery type and size you need to have on hand before replacing your key fob battery.

Release the mechanical key inside of your fob using the release latch on the fob.

A small, flathead screwdriver will help remove the cover to the battery compartment. Before you remove the battery, take note of which direction the positive and negative sides are in.

Replace the old battery with a brand new battery. Pay close attention to ensure that you’ve put the correct side of the battery in first.

Regardless of what model you’re replacing the battery for, you can generally use these instructions as a guide for the process. If you’re having trouble or are confused with the process, feel free to contact ABC Nissan for more information. You can also bring your Nissan key fob into our service department for assistance.

Explore Our Extensive Pre

We hope this guide helps simplify your 2015 Nissan Altima key fob battery replacement! Check out more car-care guides and car loan tips for Philadelphia car-buyers from Rolls Auto Sales, where were proud to supply quality used vehicles to the South Jersey area. Stop by to see our used vehicle specials, and then schedule a test drive today!

When To Replace Your Key Fob Battery

How long your key fob battery lasts depends on several factors such as how often you use it, your climate, and if the battery has been replaced before. A new key fob battery should, on average last a few years before you need to replace it. If you recently replaced your key fob battery and the key fob is still not working correctly, the problem is likely with the key fob itself.

Recommended Reading: Is My Car Out Of Gas Or Dead Battery

What Is The Emergency Ignition Key

Every keyless entry system comes with an emergency metal key stored inside the key fob. This ensures that youll never be stranded far from Allentown if your key fob battery dies unexpectedly! Your cars door handle should have a small keyhole on the underside to insert the key and unlock the car manually.

Before you can perform 2015 Nissan Altima key fob battery replacement, youll first need to remove the emergency key from the fob. Read the steps below for details!

Nissan Key Fob Battery Replacement: What To Watch Out For

2007 Nissan Altima Key Fob Battery ~ Perfect Nissan

Though the procedure is relatively simple. It would be best if you were careful of a few things when doing a Nissan key fob battery replacement:

  • When opening the casing into two parts, don’t use the grooves on the side of the case as a point to lever your screwdriver. Older keys have these side grooves, but ignore those and focus on the slits at the top.
  • When prying open the casing from the top, apply only a little force to avoid damaging the edge or any internal parts.
  • Keep your key fob away from anything magnetic while changing the battery. Magnets can cause damage to the inner workings of your Nissan key fob.
  • When replacing the battery, ensure that you put the side with the writing “Panasonic CR 2032” face down into the battery casing. If you put it in the wrong way, it won’t work.

Also Check: Who Sells Auto Craft Batteries

What Kind Of Battery Does Nissan Key Fob Use

The Nissan key fob uses one CR2032 battery that gives 3 volts. This is a lithium coin battery. It is similar to CR2025 though it is slightly smaller in size than the CR2025.

What do the letters and the numbers in the CR2032 battery mean?

C- is used to identify lithium manganese dioxide. This is the chemical substance used to make the battery

R- signifies that the battery is Round.

The 4 digits after the letters refer to size. The first two indicate the diameter while the last two indicate the thickness.

In our case CR2032 battery it means itâs a battery that uses lithium manganese dioxide and has a diameter of 20mm and a thickness of 3.2mm

Other batteries designated as DL2032, BR2032, KL2032, L2032, ECR2032, KCR2032, E-CR2032, and KECR2032 will all fit in the key fob.

How To Replace Your Nissan Key Fob Battery

Replacing the battery in your Acura key fob is a straightforward but not always easy process. Key fobs are sealed tight to help durability and keep water from getting into the electronics, and there isn’t always an obvious way to open them up. You may also need to reprogram your key with your vehicle after changing the battery in some cases. Our Parts team has the tools and knowledge to replace the battery in your specific key fob correctly. Stop in, and we will gladly help you!

Recommended Reading: M & M Alternators & Batteries Inc

How Can I Protect My Worn Nissan Key Fob Remote

You may want to consider adding a cover to protect your remote. The covers can protect the buttons and the key fob remote itself. Our recommendation would be to use a Silicone Key Fob Cover for Nissan, which protects the keyless remote. A cover will better protect the key from water in case you accidentally drop the key.

Gently Pry At The Seam Or Notch

2010 – 2020 Nissan Rogue Key Fob Battery Replacement

Alaina DiGiacomo/

When it comes to how to change the battery in your key fob, youll only need one tool. Using a small, thin flat-bladed screwdriver , pry apart the two halves gently to open the fob down the middle. Most cars with key fobs and transponder keys wont let you lock your keys inside the car, but you need to be prepared just in case the worst case happens. .

Read Also: What To Do With Old Car Batteries

How To Program Your Nissan Intelligent Key

If you have misplaced your key or need to program a new one, follow these steps:

Step 1: Make sure your key is in the ignition and turn it On without starting the engine.

Step 2: Press and release the Lock button on your key fob within five seconds.

Step 3: Press and release the Unlock button on your key fob within five seconds.

Step 4: Within five seconds, press and release the Lock button on your key fob again.

Step 5: Your Nissans headlights should flash to indicate that the new key has been programmed successfully.

Does It Matter If I Use A 2032 Or 2025 Battery In My Nissan Key Fob

The numbers on a coin-type battery indicate the batterys size. The CR2032 and CR2025 are two of the most popular car remote batteries on the market and look nearly identical The 20 stands for the 20-millimeter diameter of the battery.

The second half of the number, 32 or 25, indicates its thickness as in 3.2 or 2.5 millimeters. Both will fit into the circle provided for the battery inside the fob, but using the wrong one will prevent the fob from closing properly and could even cause damage.

Recommended Reading: Places To Buy Car Batteries

Signs You Need To Replace Your Key Fob Battery

If your key fob is starting to work intermittently, that’s a good sign the battery is dying. If you have to press the lock/unlock button multiple times to get it to work, then chances are your battery will need to be replaced soon. Of course, if your key fob has completely stopped working, the battery is most likely dead.

How Long Does Nissan Key Fob Battery Last

2 Button Remote Key Fob Case + Battery For OPEL Agila B NISSAN Pixo ...

The battery is a primary battery, not rechargeable. Stored under normal room temperatures, the battery has a shelf life of 10years, while being used in Nissan key fob, the battery can last from 3years and above.

The CR2032 battery has a wide operating temperature from -20°C to as high as +60°C. The battery usually weighs 3.0 grams.

You May Like: How To Change Battery In Liftmaster Garage Door Opener

Is It Time To Service Your Nissan

If your key fob battery is dying, it’s a good reminder that it could be time to service your vehicle. If you haven’t had your Nissan serviced in the past year, go ahead and make an appointment with our online scheduler. We will replace your key fob battery, change your oil, and perform any other necessary maintenance so you can get back out on the road without any issues!

How To Start A Nissan If The Key Doesnt Work

Press the brake, and press the start button. Nothing happens. Nissan didnt even crank. If your push button is not starting the car, follow these troubleshooting steps: Check the main battery.Check key fob batteries are in good condition.Faulty brake switch. If you are sure that the car battery and key batteries are in good condition, next you should check the brake switch.

Recommended Reading: Change Battery In Smoke Detector

S To Reprogram The Key Fob After Battery Replacement

Sometimes after the battery replacement, the key fob may not function as expected and the fob may need to be programmed.

The process to program the Nissan key fob is easy and follows the following steps.

Step 1: Open the door and then lock them to begin the process.

Step 2: Put the keys in the ignition and remove them. Repeat until the hazards flash twice.

Step 3: Put the key into the start position and turn it to the first level. The dashboard lights should come on. Note: Do not start the engine.

Step 4: Once the dashboard lights come on, quickly press a key in the key fob.

Step 5: To test if the key fob was reprogrammed, step out of the car and try to lock the doors. If it does lock, the key fob was programmed right. If it does not, repeat the process above.

How To Start Your Your Nissan With A Dead Key Fob

How to replace battery in Nissan key fob

But what if you rely and keyless entry and your car wont start? Nissan models have other ways of being started:

  • If your vehicle has a key fob port, you can put the key fob in the port and tap the brake pedal or clutch as you press the START/STOP button.
  • If you find your Nissan car, truck, or SUV doesnt have a port, simply hold the key fob against the START/STOP button while stepping on the brake or clutch.

Even when your Nissan key fob is dead, you should be able to start the vehicle! But of course, youll want to change the key fob battery soon.

Recommended Reading: Dyson V8 Absolute Replacement Battery

Indicators Of Dead Nissan Key Fob Battery

The Nissan key fob comes equipped with a flashing light to indicate the health of the battery. When the battery runs out, the light will stop blinking and it is time to change the battery.

Before the light stops completely, you may notice that it is flashing dimly and the key needs several pressing for it to function.

You may also notice that you have to get very close to the car for the key to function. This is an indicator that the battery is dying out and it is giving you time to buy a replacement battery.

Easy Steps To Change Your Nissan Key Fob Battery

Nissan has used a similar fob for several years now, but that doesn’t make it any more obvious how to change the battery. Below is a quick 6-step guide for exactly how to change your Nissan key fob battery.

1 year, 4 months ago

For several years, Nissan drivers have used a similar 4- or 5-button key fob called the Intelligent Key. There have been subtle changes up to 2021, but the unit remains essentially the same. Obviously, the key fob is crucial to the everyday operation of the car. You might need a working key fob to open up or start your vehicle. You wont be able to lock it remotely, either. In other words, keeping your key fob supplied with power is always a good idea. The good news on modern Nissan key fob battery units is that there is a flashing light on the casing. When the light stops flashing, it indicates that the battery needs changing. Its designed to act as a warning: if there isnt enough power to keep the light blinking, then there isnt enough power to communicate with your Nissan. In todays blog, were looking at Nissan key fob battery replacement, how its done, and how often you might have to do it. Well also include some additional tips about your key fob.

Process overview:

– Step 6: Replace the mechanical key

Read Also: Multimeter To Test Car Battery

Changing A Dead Battery In A Nissan Key Fob

You press the unlock button on your key fob. Nothing happens. You get a bit closer to your vehicle and try again. Still nothing. It has a dead battery. What a pain! No worries. Its a simple fix that only takes a minute or two.

Heres how to change a dead battery on your Nissan key fob. Keep reading for our step-by-step guide.

Get Assistance From Jeffrey Nissan

2 Button Remote Key Fob Case Replace + Battery For OPEL Agila NISSAN ...

Need more assistance with your Nissan key fob? Visit us at Jeffrey Nissan to learn more. We can help you replace the battery in your key fob, answer questions about our vehicles, help you compare Nissan models to find the right one for you, and more! Make the trip to Jeffrey Nissan in Roseville today or contact us in the meantime with any questions about Nissan key fobs.

Don’t Miss: 2016 Honda Civic Battery Replacement

How Important Is This Service

Battery cables transfer currency from the battery to the electrical components of the vehicle. Without functioning battery cables, the battery has no way of outputting energy. The alternator and starter rely on battery cables for power, so malfunctioning cables mean that your vehicle wont start up or have any electrical energy.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Finding a trusted mechanic at a reasonable price can be extremely difficult. With YourMechanic you can skip the auto shop altogether. They send certified and screened mechanics straight to your door and enable you to save big on car repair and maintenance.


YourMechanic will come to wherever your car is to perform any of a wide variety of car maintenance and repair services, and will charge you less than you’d normally pay if you were to drop your car off at a garage.


“YourMechanic will fix your car at your garage at a fixed hourly rate much lower than their brick-and-mortar counterparts.”


Nissan Intelligent Key Battery Replacement

Instruction on how to replace the battery on Nissans intelligent key. This remote is often used on Nissan Maxima, Rogue, Altima, and 350Z.

  • Remove the metal key.
  • Pull out the metal key. Press on the small release tab shown in the picture.
  • The metal blade key can be used to open the drivers door or the trunk manually.
  • Look to the backside of the key. Use a plastic wedge or a small flat screwdriver to separate the key housing.
  • Remove the old battery and install a new one.
  • Remove the old battery and install the new CR2025 battery. Make a note of the battery orientation. Do not rotate the battery. Make sure the negative side of the battery is facing you.
  • Read Also: Inogen One G3 Double Battery

    Stressing The Start Button

    • Press on the key fob. If it doesnt work, its probably because the battery is dead.
    • If the key fob has a physical hidden key or backup key inside, flip the key fob and get it. Once inside, look for a button near the steering column that says Start. Press that, and your car should start right up.
    • If theres no hidden emergency key and you cant find the start button, youll need to call a tow truck or Nissan dealer for assistance.

    How Much Does A Battery Cost For My Nissan Key Fob

    How To Replace A 2007 – 2013 Nissan Altima Key Fob Battery

    You can find a replacement battery for your Nissan Kicks or Maxima at almost any store or online for $2 to $5. If you go to your dealership, expect to pay up to $10 for the same battery and a fee to have them switch it out for you.

    Your Nissan Owners Manual does not specify a preferred manufacturer for this battery. Familiar name brands like Panasonic, Energizer, and Duracell tend to offer better performance, but even a generic brand will work. It is the size that matters.

    You May Like: How To Replace Dyson V6 Battery

    Nissan Key Fob Old Battery Replacement: What To Watch Out For

    Replacing the battery in your Nissan key fob is a pretty straightforward process, but there are a few things youll want to keep in mind to make sure it goes smoothly.

    • Be sure to purchase a replacement battery that is specifically designed for your key fob model. You can usually find this information on the back of the key fob or in your owners manual. Once you have the correct battery, simply remove the old one and insert the new one in its place.
    • Be careful not to touch the exposed metal contacts on the new battery, as this can cause corrosion and prevent it from working properly. Also, make sure that the new battery is inserted with the positive side facing up.
    • Once you have replaced the battery, reassemble your key fob and test it out to ensure its working properly.
    • With these simple tips in mind, replacing the battery in your Nissan key fob should be a breeze!

    Related Posts